참고문헌
- H. Cho and B.W. Lee, "High temperature properties of surface-modified hastelloy X alloy", J. Korean Cryst. Growth Cryst. Technol. 22 (2012) 183. https://doi.org/10.6111/JKCGCT.2012.22.4.183
- W.D. Munz, "Titanium aluminum nitride films: a new alternative to TiN coatings", J. Vac. Sci. Technol. A 4 (1986) 2717. https://doi.org/10.1116/1.573713
- O. Knotek, W.D. Munz and T. Leyendecker, "Industrial deposition of binary, ternary, and quaternary nitrides of titanium, zirconium, and aluminum", J. Vac. Sci. Technol. A 5 (1987) 2173. https://doi.org/10.1116/1.574948
- A. Krella and A. Czyzniewski, "Influence of the substrate hardness on the cavitation erosion resistance of TiN coating", Wear 263 (2007) 395. https://doi.org/10.1016/j.wear.2007.02.003
- T. Cselle and A. Barimani, "Today's applications and future developments of coatings for drills and rotating cutting tools", Surf. Coat. Technol. 76-77 (1995) 712. https://doi.org/10.1016/02578-9729(68)00119-
- B. Navinsek, "Improvement of cutting tools by TiN PVD hard coating", Mater. Manuf. Process. 7 (1992) 363. https://doi.org/10.1080/10426919208947426
- M.T. Tilbrook, D.J. Paton, Z. Xie and M. Hoffman, "Microstructural effects on indentation failure mechanisms in TiN coatings: Finite element simulations", Acta Mater. 55 (2007) 2489. https://doi.org/10.1016/j.actamat.2006.11.043
- Y. Massiani, A. Medjahed, J.P. Crousier, P. Gravier and I. Rebatel, "Corrosion of sputtered titanium nitride films deposited on iron and stainless steel", Surf. Coat. Technol. 45 (1991) 115. https://doi.org/10.1016/0257-8972(91)90213-G
- S.V. Hainsworth and W.C. Soh, "The effect of the substrate on the mechanical properties of TiN coatings", Surf. Coat. Technol. 163 (2003) 515.
- J.H. Huang, C.Y. Hsu, S.S. Chen and G.P. Yu, "Effect of substrate bias on the structure and properties of ionplated ZrN on Si and stainless steel substrates", Mater. Chem. Phys. 77 (2002) 14.
- Y. Choi, S. Jeon, M.S. Jeon, H.G. Shon, H.H. Chun, Y.S. Lee and H. Lee, "Crack propagation behavior of TiN coatings by laser thermal shock experiments", Appl. Surf. Sci. 258 (2012) 8752. https://doi.org/10.1016/j.apsusc.2012.05.086
-
S. Jeon, J. Ha, Y. Choi, I. Jo and H. Lee, "Interfacial stability and diffusion barrier ability of
$Ti_1 _xZr_xN$ coatings by pulsed laser thermal shock", Appl. Surf. Sci. 320 (2014) 602. https://doi.org/10.1016/j.apsusc.2014.09.134 -
S. Jeon, B. Kim, Y. Choi, I. Jo and H. Lee, "Thermal shock behaviors of
$Ti_1 _xZr_xN$ coatings by accelerated test based on pulsed laser ablation", Ceram. Int. 42 (2016) 2241. https://doi.org/10.1016/j.ceramint.2015.10.017 - S.L. Soo, D.K. Aspinwall and R.C. Dewes, "3D FE modelling of the cutting of Inconel 718", J. Mater. Process. Technol. 150 (2004) 116. https://doi.org/10.1016/j.jmatprotec.2004.01.046
- E. Ceretti, M. Lucchi and T. Altan, "FEM simulation of orthogonal cutting: serrated chip formation", J. Mater. Process. Technol. 95 (1999) 17. https://doi.org/10.1016/S0924-0136(99)00261-7
- K.D. Bouzakis, F. Klocke, G. Skordaris, E. Bouzakis, S. Gerardis, G. Katirtzoglou and S. Makrimallakis, "Influence of dry micro-blasting grain quality on wear behavior of TiAlN coated tools", Wear 271 (2011) 783. https://doi.org/10.1016/j.wear.2011.03.010
- P. Peyre, I. Chaieb and C. Braham, "FEM calculation of residual stresses induced by laser shock processing in stainless steels", Model. Simul. Mater. Sci. Eng. 15 (2007) 205. https://doi.org/10.1088/0965-0393/15/3/002
- J.H. Lee, C.D. Yoo and Y.S. Kim, "A laser-induced thermal spray printing process for phosphor layer deposition of PDP", J. Micromech. Microeng. 17 (2007) 258. https://doi.org/10.1088/0960-1317/17/2/011
- S. Jeon, C.J. Van Tyne and H. Lee, "Degradation of TiAlN coatings by the accelerated life test using pulsed laser ablation", Ceram. Int. 40 (2014) 8677. https://doi.org/10.1016/j.ceramint.2014.01.085
- S. Jeon, H. Lee, I. Jo, D. Shin and K.S. Lee, "Degradation of TiN coatings on Inconel 617 and silicon wafer substrates under pulsed laser ablation", J. Mater. Eng. Perform. 23 (2014) 1651. https://doi.org/10.1007/s11665-014-0915-x
- K. Ding and L. Ye, "FEM simulation of two sided laser shock peening of thin sections of Ti-6Al-4V alloy", Surf. Eng. 19 (2003) 127. https://doi.org/10.1179/026708403225002568
- N.A. Sakharova, J.V. Fernandes, M.C. Oliveira and J.M. Antunes, "Influence of ductile interlayers on mechanical behavior of hard coatings under depth-sensing indentation: a numerical study on TiAlN", J. Mater. Sci. 45 (2010) 3812. https://doi.org/10.1007/s10853-010-4436-1
- D. Stone, K. Yoder and W. Sproul, "Hardness and elastic modulus of TiN based on continuous indentation technique and new correlation", J. Vac. Sci. Technol. A 9 (1991) 2543. https://doi.org/10.1116/1.577270
- N.K. Seo, S. Jeon, Y. Choi, M.S. Jeon, H.G. Shin and H. Lee, "Interfacial characteristics of TiN coatings on SUS304 and silicon wafer substrates with pulsed laser thermal shock", Korean J. Met. Mater. 52 (2014) 81. https://doi.org/10.3365/KJMM.2014.52.1.081
- Q. Lu, S.S. Mao, X. Mao and R.E. Russo, "Delayed phase explosion during high-power nanosecond laser ablation of silicon", Appl. Phys. Lett. 80 (2002) 3072. https://doi.org/10.1063/1.1473862
- J. Haider, M. Rahman, B. Corcoran and M.S.J. Hashmi, "Simulation of thermal stress in magnetron sputtered thin coating by finite element analysis", J. Mater. Process. Technol. 168 (2005) 36. https://doi.org/10.1016/j.jmatprotec.2004.09.093
- H. Oettel and R. Wiedemann, "Residual stresses in PVD hard coatings", Surf. Coat. Technol. 76-77 (1995) 265. https://doi.org/10.1016/0257-8972(95)02581-2
- M. Bielawski, "Residual stress control in TiN/Si coatings deposited by unbalanced magnetron sputtering", Surf. Coat. Technol. 200 (2006) 3987. https://doi.org/10.1016/j.surfcoat.2005.06.004
- C. Kirchlechner, K.J. Martinschitz, R. Daniel, M. Klaus, C. Genzel, C. Mitterer and J. Keckes, "Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction", Thin Solid Films 518 (2010) 2090. https://doi.org/10.1016/j.tsf.2009.08.011