DOI QR코드

DOI QR Code

Development of the Calibration Method for the Boost Pressure and EGR Rate of a WGT Diesel Engine Using Mean Value Model

평균값 모델을 활용한 WGT 디젤엔진의 과급압력 및 EGR율 보정 방법 개발

  • Chung, Jaewoo (Green Car Power System R&D Division, Korea Automotive Technology Institute) ;
  • Kim, Namho (Green Car Power System R&D Division, Korea Automotive Technology Institute) ;
  • Lim, Changhyun (Green Car Power System R&D Division, Korea Automotive Technology Institute) ;
  • Kim, Deokjin (Green Car Power System R&D Division, Korea Automotive Technology Institute) ;
  • Kim, Kiyong (R&D Center, Keyyang Precision Co.)
  • 정재우 (자동차부품연구원 그린카파워시스템 연구본부) ;
  • 김남호 (자동차부품연구원 그린카파워시스템 연구본부) ;
  • 임창현 (자동차부품연구원 그린카파워시스템 연구본부) ;
  • 김덕진 (자동차부품연구원 그린카파워시스템 연구본부) ;
  • 김기용 (계양정밀 기술연구소)
  • Received : 2015.10.13
  • Accepted : 2016.03.14
  • Published : 2016.05.01

Abstract

Globally, many researchers have been trying to improve the fuel economy of a vehicle for satisfying future $CO_2$ regulation and minimizing air pollution problem. For the same background, diesel engine and vehicle system optimization using simulation models have been key technologies for the improvement of vehicle system efficiency. Therefore, in this study, calibration method for the air breathing system of a WGT diesel engine using mean value model has been composed for efficient engine and vehicle optimization simulation researches. And virtual WGT performances have been calculated for a 2 cylinder downsized diesel engine system. From these researches, the calibration method for the boost pressure and EGR rate of a virtual diesel engine related with WGT performances could be composed and some of technical issue related with downsized diesel engine could be investigated.

Keywords

References

  1. C. D. Rakopoulos and E. G. Giakoumis, "Review of Thermodynamic Diesel Engine Simulations Under Transient Operating Conditions," SAE 2006-01-0884, 2006.
  2. H. Karaky, G. Mauviot, X. Tauzia and A. Maiboom, "Development and Validation of a New Zero-Dimensional Semi-Physical NOx Emission Model for a D.I. Diesel Engine Using Simulated Combustion Process," SAE 2015-01-1746, 2015.
  3. G. Wachtmeister, B. R. Hohn, C. Wirth, H. Bunner and A. Ziegler, "Concept for Hybrid Vehicles with Simplified Diesel Engines," ATZ Worldwide Emagazines, No.5, 2010.
  4. S. Chen and F. Yan, "Control of a Dual-loop Exhaust Gas Recirculation System for a Turbocharged Diesel Engine," Int. J. Automotive Technology, Vol.16, No.5, pp.733-738, 2015. https://doi.org/10.1007/s12239-015-0074-6
  5. J. Chung, N. Kim, C. Kim and K. Kim, "Development of an EGR Model a WGT Diesel Engine," KSAE Annual Conference Proceedings, pp.276-277, 2014.
  6. J. E. Chung, D. Y. Jeong, J. W. Chung and W. Kang, "Compressor Performance Prediction of Turbocharger in the Passenger Diesel Engine," KSAE 30th Anniversary Conference Proceedings, pp.275-280, 2008.
  7. S. L. Dixon, Fluid Mechanics and Thermodynamics of Turbomachinery-Fifth Edition, Elsevier Butterworth-Heinemann Publications, Oxford, pp.5-7, 2005.
  8. J. W. Chung, N. H. Kim, C. H. Kim and K. Y. Kim, "A Study on the Turbine Efficiency Characteristics of the WGT," KSAE Spring Conference Proceedings, p.225, 2014.
  9. D. A. Kouremenos, C. D. Rakopoulos, D. T. Hountalas and T. K. Zannis, "Development of a Detailed Friction Model to Predict Mechanical Losses at Elevated Maximum Combustion Pressures," SAE 2001-01-0333, 2001.
  10. L. Miklanek, V. Klir, M. Emrich and L. Pohorelsky, "Thermal Balance Method for EGR Rate Determination Usable for Real Engine with Uncooled EGR System," SAE 2009-01-1114, 2009.

Cited by

  1. An Investigation on Performance Evaluation Method of Turbocharger Using Zero Power Disc vol.25, pp.5, 2017, https://doi.org/10.7467/KSAE.2017.25.5.590
  2. Control Oriented Model for Real-time Mean-value Diesel Engine vol.26, pp.2, 2018, https://doi.org/10.7467/KSAE.2018.26.2.211