DOI QR코드

DOI QR Code

Numerical study of airfoil thickness effects on the performance of J-shaped straight blade vertical axis wind turbine

  • Zamani, Mahdi (Department of Mechanical Engineering, Ferdowsi University of Mashhad) ;
  • Maghrebi, Mohammad Javad (Department of Mechanical Engineering, Ferdowsi University of Mashhad) ;
  • Moshizi, Sajad A. (Sun-Air Research Institute, Ferdowsi University of Mashhad)
  • 투고 : 2015.08.16
  • 심사 : 2016.03.24
  • 발행 : 2016.05.25

초록

Providing high starting torque and efficiency simultaneously is a significant challenge for vertical axis wind turbines (VAWTs). In this paper, a new approach is studied in order to modify VAWTs performance and cogging torque. In this approach, J-shaped profiles are exploited in the structure of blades by means of eliminating the pressure side of airfoil from the maximum thickness toward the trailing edge. This new profile is a new type of VAWT airfoil using the lift and drag forces, thereby yielding a better performance at low TSRs. To simulate the fluid flow of the VAWT along with J-shaped profiles originated from NACA0018 and NACA0030, a two-dimensional computational analysis is conducted. The Reynolds Averaged Navier-Stokes (RANS) equations are closed using the two-equation Shear Stress Transport (SST) turbulence model. The main objective of the study is to investigate the effects of J-shaped straight blade thickness on the performance characteristics of VAWT. The results obtained indicate that opting for the higher thickness in J-shaped profiles for the blade sections leads the performance and cogging torque of VAWT to enhance dramatically.

키워드

참고문헌

  1. The open source cfdtoolkids (2010), "User guide", http://www.openfoam.com [Online].
  2. Akwa, J.V., Vielmo, H.A. and Petry, A.P. (2012), "A review on the performance of Savonius wind turbines", Renew. Sust. Energ. Rev., 16, 3054-3064. https://doi.org/10.1016/j.rser.2012.02.056
  3. Almohammadi, K.M., Ingham, D., MA, L. and Pourkashanian, M. (2011), "CFD modelling investigation of a straight-blade vertical axis wind turbine", Proceedings of the 13th International Conference on Wind Engineering, Amsterdam, Netherland.
  4. Beaudoin, M. and Jasak, H. (2008), "Development of a generalized grid interface for turbomachinery simulations with OpenFOAM", Proceedings of the Open Source CFD International Conference, Berlin, Germany, December.
  5. Bos, R. (2012), Self-starting of a small urban Darrieus rotor, Master of Science, Delft University of Technology, Netherland.
  6. Bravo, R., Tullis, S. and Ziada, S. (2007), "Performance testing of a small vertical-axis wind turbine", Proceedings of the 21st Canadian Congress of Applied Mechanics (CANCAM07), Toronto, Canada, June.
  7. Darrieus, G. (1931), "Turbines having its rotating shaft transverse to the flow of the current", US patent no. 1835 018 patent application.
  8. Fernando, M.S.U.K. and Modi, V.J. (1989), "A numerical analysis of the unsteady flow past a Savonius wind turbine", J. Wind Eng. Ind. Aerod., 32, 303-327. https://doi.org/10.1016/0167-6105(89)90005-6
  9. Fujisawa, N. (1992), "On the torque mechanism of Savonius rotors", J. Wind Eng. Ind. Aerod., 40(3), 277-292. https://doi.org/10.1016/0167-6105(92)90380-S
  10. Ghasemi, A., Pathak, A. and Raessi, M. (2014), "Computational simulation of the interactions between moving rigid bodies and incompressible two-fluid flows", Comput. Fluids, 94, 1-13,. https://doi.org/10.1016/j.compfluid.2014.01.027
  11. Ghasemi, A., Olinger, D. and Tryggvason, G. (2015), "Numerical simulation of tethered underwater kites for power generation", Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition, IMECE 2015, Houston, USA, November.
  12. Hill, N., Dominy, R., Ingram, G. and Dominy, J. (2009), "Darrieus turbines: The physics of self-starting", Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223, 21-29.
  13. Kamoji, M.A., Kedare, S.B. and Prabhu, S.V. (2009), "Performance tests on helical Savonius rotors", Renew. Energ., 34(3), 521-529. https://doi.org/10.1016/j.renene.2008.06.002
  14. Karbasian, H.R., Moshizi S.A. and Maghrebi M.J. (2015), "Dynamic stall analysis of S809 pitching airfoil in unsteady free stream velocity", J. Mechanics, FirstView.
  15. Khare, V., Nema, S. and Baredar, P. (2016), "Solar-wind hybrid renewable energy system: A review", Renew. Sust. Energ. Rev., 58, 23-33. https://doi.org/10.1016/j.rser.2015.12.223
  16. Lanzafame, R., Mauro, S. and Messina, M. (2014), "2D CFD modeling of H-darrieus wind turbines using a transition turbulence model", Energy Procedia, 45, 131-140. https://doi.org/10.1016/j.egypro.2014.01.015
  17. Menet, J.L. (2004), "A double-step Savonius rotor for local production of electricity: a design study", Renew.Energ., 29(11), 1843-1862. https://doi.org/10.1016/j.renene.2004.02.011
  18. Menter, F.R. (1994), "Two-equation eddy-viscosity turbulence models for engineering applications", AIAA J., 32(8), 1598-1605. https://doi.org/10.2514/3.12149
  19. Modi, V.J. and Fernando, M.S.U.K. (1989), "On the performance of the savonius wind turbine", J. Solar Energy Eng., 111(1), 71-81. https://doi.org/10.1115/1.3268289
  20. Moshizi, S.A., Madadi, A. and Kermani, M.J. (2014a), "Comparison of inviscid and viscous transonic flow field in VKI gas turbine blade cascade", Alexandria Eng. J., 53(2), 275-280. https://doi.org/10.1016/j.aej.2014.03.007
  21. Moshizi, S.A., Nakhaei, M.H., KermaniI, M.J. and Madadi A. (2014b), "Development of a numerical based correlation for performance losses due to surface roughness in axial turbines", J. Mechanics, 30(6), 631-642. https://doi.org/10.1017/jmech.2014.10
  22. Saha, U.K., Thotla, S. and Maity, D. (2008), "Optimum design configuration of Savonius rotor through wind tunnel experiments", J. Wind Eng. Ind. Aerod., 96(8-9), 1359-1375. https://doi.org/10.1016/j.jweia.2008.03.005
  23. Savonius, S. J. (1931), "The S-rotor and its applications", Mech. Eng., 53, 333-338.
  24. Siddiqui, M.S., Durrani, N. and Akhtar, I. (2015), "Quantification of the effects of geometric approximations on the performance of a vertical axis wind turbine", Renew. Energ., 74, 661-670. https://doi.org/10.1016/j.renene.2014.08.068
  25. Singa, M.A., Biswas, A. and Misra, R.D. (2015), "Investigation of self-starting and high rotor solidity on the performance of a three S1210 blade H-type Darrieus rotor", Renew. Energ., 76, 381-387. https://doi.org/10.1016/j.renene.2014.11.027
  26. Srinivasan, G.R., Ekaterinaris, J.A. and Mccroskey, W.J. (1995), "Evaluation of turbulence models for unsteady flows of an oscillating airfoil", Comput. Fluids, 24(7), 833-861. https://doi.org/10.1016/0045-7930(95)00016-6
  27. Streiner, S., Kramer, E., Eulitz, A. and Armbruster, P. (2007), "Aeroelastic analysis of wind turbines applying 3D CFD computational results", J. Physics: Conference Series, 75.
  28. Tjiu, W., Marnoto, T., Mat, S., Ruslan, M.H. and Sopian, K. (2015), "Darrieus vertical axis wind turbine for power generation I: Assessment of Darrieus VAWT configurations", Renew. Energ., 75, 50-67. https://doi.org/10.1016/j.renene.2014.09.038
  29. Tong, W. (2010), Wind Power Generation and Wind Turbine Design, WIT press, Kollmorgen Corporation, USA.
  30. Wilcox, D.C. (2006), Turbulence Modeling for CFD, DCW industries.

피인용 문헌

  1. Three dimensional simulation of J-shaped Darrieus vertical axis wind turbine vol.116, 2016, https://doi.org/10.1016/j.energy.2016.10.031
  2. Variable pitch blades: An approach for improving performance of Darrieus wind turbine vol.8, pp.5, 2016, https://doi.org/10.1063/1.4964310
  3. Numerical simulation for unsteady flow over marine current turbine rotors vol.23, pp.4, 2016, https://doi.org/10.12989/was.2016.23.4.301
  4. Variable Pitch Approach for Performance Improving of Straight-Bladed VAWT at Rated Tip Speed Ratio vol.8, pp.6, 2018, https://doi.org/10.3390/app8060957
  5. Comparison between two-dimensional and three-dimensional computational fluid dynamics techniques for two straight-bladed vertical-axis wind turbines in inline arrangement pp.2048-402X, 2018, https://doi.org/10.1177/0309524X18780384
  6. Investigations of H-Darrieus rotors for different blade parameters at low wind speeds vol.25, pp.6, 2016, https://doi.org/10.12989/was.2017.25.6.551
  7. A Review on the Evolution of Darrieus Vertical Axis Wind Turbine: Small Wind Turbines vol.7, pp.4, 2016, https://doi.org/10.4236/jpee.2019.74002
  8. Criticism study of J-Shaped darrieus wind turbine: Performance evaluation and noise generation assessment vol.177, pp.None, 2016, https://doi.org/10.1016/j.energy.2019.04.102
  9. Numerical Investigation on the Effects of Airfoil Leading Edge Radius on the Aerodynamic Performance of H-Rotor Darrieus Vertical Axis Wind Turbine vol.12, pp.19, 2016, https://doi.org/10.3390/en12193794
  10. Effects of blade configuration and solidity on starting torque of Darrieus wind turbine vol.32, pp.2, 2016, https://doi.org/10.12989/was.2021.32.2.169
  11. Comparison of aerodynamic performances of various airfoils from different airfoil families using CFD vol.32, pp.3, 2016, https://doi.org/10.12989/was.2021.32.3.239