International Journal of Fluid Machinery and Systems

한국유체기계학회 (Korean Society for Fluid machinery)
권호 표지
DOI QR코드

DOI QR Code

Historical Perspective on Fluid Machinery Flow Optimization in an Industry

  • Goto, Akira (Technology Development Division Fluid Machinery & Systems Company)
  • 투고 : 2015.11.27
  • 심사 : 2015.12.29
  • 발행 : 2016.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Fluid-dynamic design of fluid machinery had heavily relied on empiricism and experimental observations for many years. Since 1980s, thanks to the advancements in Computational Fluid Dynamics (CFD), a variety of flow physics have been revealed. The contribution by CFD is indispensable; however, the challenge is required not only on the advancements in CFD technologies but also innovation of "design (optimization) technologies" because of the complex interactions between 3-D flow fields and the complex 3-D flow passage configurations, etc. This paper presents historical perspective on fluid machinery flow optimization in an industry with some messages for the future.

키워드

참고문헌

  1. Inokuchi, A., 1905, "Theory of Ordinary Centrifugal Pumps and of a New Centrifugal Pumps having Divergent Vortex Chamber Provided with Guide Vanes for Producing Forced Vortex," The Journal of the College of Engineering, Tokyo Imperial University, Japan, Vol. II, No. 4.
  2. Goto, A., 1992, "Study of Internal Flow in a Mixed Flow Pump Impeller at Various Tip Clearances Using 3-D Viscous Flow Calculations," ASME Journal of Turbomachnery, Vol. 114, pp. 373-382. https://doi.org/10.1115/1.2929154
  3. Goto, A., Zangeneh, M., Takemura, T., 1996, "Suppression of Secondary Flows in a Mixed Flow Pump Impeller by Application of 3-D Inverse Design Method," ASME Journal of Turbomachinery, Vol. 118, pp. 544-551. https://doi.org/10.1115/1.2836701
  4. Ashihara, K. and Goto, A., 2001, "Turbomachinery Blade Design using 3D Inverse Design Method, CFD and Optimization Algorithm," ASME Turbo Expo.
  5. Takayama Y. and Watanabe, H., 2009, "Multi-Objective Optimization of a Mixed-Flow Pump," ASME Fluids Engineering Division Summer Meeting Vail, FEDSM2009-78348.
  6. Data source; http://www.top500.org.
  7. Zangeneh, M., Goto, A., Harada, H., 1998, "On the Design Criteria for Suppression of Secondary Flows in Centrifugal and Mixed-Flow Impellers," ASME Journal of Turbomachinery, Vol.120, pp723-735. https://doi.org/10.1115/1.2841783
  8. Goto, A., 1995, "Numerical and Experimental Study of 3-D Flow Fields within a Diffuser Pump Stage at Off-Design Condition," The Joint ASME-JSME Fluids Engineering Summer Conference, Hilton Head Islands, FED-Vol. 227, pp. 1-9.
  9. Zangeneh, M., 1991, "A Compressible Three Dimensional Blade Design Method for Radial and Mixed Flow Turbo-machinery Blades," Int. J. Numerical Methods in Fluids, Vol. 13, pp. 599-624. https://doi.org/10.1002/fld.1650130505
  10. Goto, A., Zangeneh, M., 2002, "Hydrodynamic Design of Pump Diffuser Using Inverse Design Method and CFD," ASME Journal of Fluids Engineering, Vol. 124, pp. 319-328. https://doi.org/10.1115/1.1467599
  11. Sakurai, T., Saito, S., Goto, A., Ashihara, K., 1999, "Pump Design System based on Inverse Method and its Application to the Development of Diffuser Pump Series," The Joint ASME-JSME Fluids Engineering Summer Conference, San Francisco, FEDSM99-6845.
  12. Zangeneh, M. et al., 2000, US Patent No. 6062819.
  13. TURBOdesign-1, Advanced Design Technology, Ltd.
  14. Kohonen, T., 2001, "Self-Organizing Maps," Springer Series in Information Sciences, Vol. 30, Third, extended edition.
  15. TURBOdesign Shaper, Advanced Design Technology, Ltd.

피인용 문헌

  1. A Study on the Half-Ducted Axial Flow Fan Designed by a Diagonal Flow Fan Design Method vol.07, pp.01, 2017, https://doi.org/10.4236/ojfd.2017.71002
  2. Three-Objective Optimization of a Centrifugal Pump to Reduce Flow Recirculation and Cavitation vol.140, pp.9, 2018, https://doi.org/10.1115/1.4039511
  3. Comprehensive Hydraulic Improvement and Parametric Analysis of a Francis Turbine Runner vol.12, pp.2, 2019, https://doi.org/10.3390/en12020307