DOI QR코드

DOI QR Code

Seismic evaluation of RC stepped building frames using improved pushover analysis

  • Sarkar, Pradip (Department of Civil Engineering, National Institute of Technology Rourkela) ;
  • Prasad, A. Meher (Department of Civil Engineering, Indian Institute of Technology Madras) ;
  • Menon, Devdas (Department of Civil Engineering, Indian Institute of Technology Madras)
  • 투고 : 2015.04.15
  • 심사 : 2015.11.23
  • 발행 : 2016.04.25

초록

'Stepped building' frames, with vertical geometric irregularity, are now increasingly encountered in modern urban constructions. This paper proposes a new approach to determine the lateral load pattern, considering the contributions from the higher modes, suitable for pushover analysis of stepped buildings. Also, a modification to the displacement coefficient method of ASCE/SEI 41-13 is proposed, based on nonlinear time history analysis of 78 stepped frames. When the newly proposed load pattern is combined with the modified displacement coefficient method, the target displacement for the stepped building frame is found to match consistently the displacement demand given by the time history analysis.

키워드

참고문헌

  1. ASCE 7 (2010), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers.
  2. ASCE/SEI 41-13 (2014), Seismic Evaluation and Retrofit of Existing Buildings, American Society of Civil Engineers, Reston, Virginia, USA.
  3. ATC 40 (1996), Seismic Evaluation and Retrofit of Concrete Buildings: Vol. 1, Applied Technology Council, USA.
  4. Athanassiadou, C.J. (2008), "Seismic performance of R/C plane frames irregular in elevation", Eng. Struct., 30(5), 1250-1261. https://doi.org/10.1016/j.engstruct.2007.07.015
  5. Carvalho, G., Bento, R. and Bhatt, C. (2013), "Nonlinear static and dynamic analyses of reinforced concrete buildings-comparison of different modelling approaches", Earthq. Struct., 4(5), 451-470. https://doi.org/10.12989/eas.2013.4.5.451
  6. Cheung, V. and Tso, W. (1987), "Lateral load analysis for buildings with setback", J. Struct. Eng., ASCE, 113(2), 209-227. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:2(209)
  7. Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31(3), 561-582 https://doi.org/10.1002/eqe.144
  8. Chopra, A.K., Goel, R.K. and Chintanapakdee, C. (2004), "Evaluation of a modified MPA procedure assuming higher modes as elastic to estimate seismic demands", Earthq. Spectra, 20(3), 757-778 https://doi.org/10.1193/1.1775237
  9. Das, S. and Nau, J.M. (2003), "Seismic design aspects of vertically irregular reinforced concrete buildings", Earthq. Spectra, 19(3), 455-477. https://doi.org/10.1193/1.1595650
  10. Dolsek, M. and Fajfar, P. (2005), "Simplified non-linear seismic analysis of infilled reinforced concrete frames", Earthq. Eng. Struct. Dyn., 34(1), 49-66. https://doi.org/10.1002/eqe.411
  11. Elnashai, A. and Sarno, L.D. (2008), Fundamentals of Earthquake Engineering, Wiley, New York.
  12. Fahjan, Y. and Ozdemir, Z. (2008), "Scaling of earthquake accelerograms for non-linear dynamic analyses to match the earthquake design spectra", 14th World Conference on Earthquake Engineering, Beijing, China.
  13. FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Existing Buildings, Federal Emergency Management Agency and American Society of Civil Engineers.
  14. Gasparini, D. and Vanmarcke, E. (1976), SIMQKE-A Program for artificial Motion Generation, Department of Civil Engineering, Massachusette Institute of Technology, USA.
  15. Goel, R.K. and Chopra, A.K. (1997), "Period formulas for moment resisting frame buildings", J. Struct. Eng., ASCE, 123(11), 1454-1461. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:11(1454)
  16. IS 13920 (1993), Indian Standard Code of Practice for Ductile Detailing of Reinforced Concrete Structures Subjected to Seismic Forces, Bureau of Indian Standards, New Delhi.
  17. IS 1893 Part 1 (2002), Indian Standard Criteria for Earthquake Resistant Design of Structures, Bureau of Indian Standards, New Delhi.
  18. IS 456 (2000), Indian Standard for Plain and Reinforced Concrete-Code of Practice, Bureau of Indian Standards, New Delhi.
  19. Jan, T.S., Liu, M.W. and Kao, Y.C. (2004), "An upper-bond pushover analysis procedure for estimating the seismic demands of high-rise buildings", Eng. Struct., 26(1), 117-128. https://doi.org/10.1016/j.engstruct.2003.09.003
  20. Jiang, Y., Li, G. and Yang, D. (2010), "A modified approach of energy balance concept based multimode pushover analysis to estimate seismic demands for buildings", Eng. Struct., 32(5), 1272-1283. https://doi.org/10.1016/j.engstruct.2010.01.003
  21. Karavasilis, T.L., Bazeos, N. and Beskos, D.E. (2008), "Seismic response of plane steel MRF with setbacks: Estimation of inelastic deformation demands", J. Constr. Steel Res., 64(6), 644-654. https://doi.org/10.1016/j.jcsr.2007.12.002
  22. Luca, F.D., Verderame, G.M. and Manfredi, G. (2014), "Eurocode-based seismic assessment of modern heritage RC structures: The case of the Tower of the Nations in Naples (Italy)", Eng. Struct., 74, 96-110. https://doi.org/10.1016/j.engstruct.2014.05.015
  23. Panagiotakos, T.B. and Fardis, M.N. (2001), "Deformation of reinforced concrete members at yielding and ultimate", ACI Struct. J., 98(2), 135-148.
  24. Papanikolaou, V.K., Elnashai, A.S. and Pareja, J.F. (2005), Limits of Applicability of Conventional and Adaptive Pushover Analysis for Seismic Response Assessment, Report of Mid-America Earthquake Center, University of Illinois at Urbana-Champaign.
  25. Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley and Sons, New York.
  26. Reyes, J.C., Riano, A.C., Kalkan, E. and Arango, C.M. (2015), "Extending modal pushover-based scaling procedure for nonlinear response history analysis of multi-story unsymmetric-plan buildings", Eng. Struct., 88, 125-137. https://doi.org/10.1016/j.engstruct.2015.01.041
  27. Roy, R. and Mahato, S. (2013), "Equivalent lateral force method for buildings with setback: adequacy in elastic range", Earthq. Struct., 4(6), 685-710. https://doi.org/10.12989/eas.2013.4.6.685
  28. SAP 2000 (2007), Integrated Software for Structural Analysis and Design (v.11), Computers & Structures, Inc., Berkeley, California.
  29. Sarkar, P. (2008), "Seismic evaluation of reinforced concrete stepped building frames", Ph.D. Thesis, Indian Institute of Technology Madras, Chennai.
  30. Sarkar, P., Prasad, A.M. and Menon, D. (2010), "Vertical geometric irregularity in stepped building frames", Eng. Struct., 32(8), 2175-2182. https://doi.org/10.1016/j.engstruct.2010.03.020
  31. Sharooz, B.B. and Moehle, J.P. (1990), "Seismic response and design of setback buildings", J. Struct. Div., ASCE, 116(5), 2002-2014.
  32. Suarez, L.E. and Montejo, L.A. (2005), "Generation of artificial earthquakes via the wavelet transform", Int. J. Solid. Struct., 42(21-22), 5905-5919. https://doi.org/10.1016/j.ijsolstr.2005.03.025
  33. Vanmarcke, E.H. and Gasparini, D.A. (1976), "Simulated earthquake motions compatible with prescribed response spectra", Report No. R76-4, Department of Civil Engineering, Massachusetts Institute of Technology Cambridge.
  34. Varadharajan, S., Sehgal, V.K. and Saini, B. (2013a), "Seismic behavior of multistory RC building frames with vertical setback irregularity", Struct. Des. Tall Spec. Build., 23(18), 1345-1380. https://doi.org/10.1002/tal.1147
  35. Varadharajan, S., Sehgal, V.K. and Saini, B. (2013b), "Determination of inelastic seismic demands of RC moment resisting setback frames", Archiv. Civ. Mech. Eng., 13(3), 370-393. https://doi.org/10.1016/j.acme.2013.02.006
  36. Wong, C.M. and Tso, W.K. (1994), "Seismic loading for buildings with setbacks", Can. J. Civ. Eng., 21(5), 863-871. https://doi.org/10.1139/l94-092
  37. Wood, S.L. (1992), "Seismic response of RC frames with irregular profiles", J. Struct. Eng., ASCE, 118(2), 545-566. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:2(545)

피인용 문헌

  1. Fundamental periods of reinforced concrete building frames resting on sloping ground vol.14, pp.4, 2016, https://doi.org/10.12989/eas.2018.14.4.305
  2. A stochastic adaptive pushover procedure for seismic assessment of buildings vol.14, pp.5, 2016, https://doi.org/10.12989/eas.2018.14.5.477
  3. Seismic behavior of 1960's RC buildings exposed to marine environment vol.90, pp.None, 2018, https://doi.org/10.1016/j.engfailanal.2018.02.011
  4. An energy-based approach to determine the yield force coefficient of RC frame structures vol.21, pp.1, 2016, https://doi.org/10.12989/eas.2021.21.1.037