DOI QR코드

DOI QR Code

Impact of temperature cycling on fracture resistance of asphalt concretes

  • Pirmohammad, Sadjad (Department of Mechanical Engineering, Faculty of Engineering, University of Mohaghegh Ardabili) ;
  • Kiani, Ahad (Department of Mechanical Engineering, Faculty of Engineering, University of Mohaghegh Ardabili)
  • 투고 : 2015.05.01
  • 심사 : 2016.02.08
  • 발행 : 2016.04.25

초록

Asphalt pavements are exposed to complex weather conditions and vehicle traffic loads leading to crack initiation and crack propagation in asphalt pavements. This paper presents the impact of weather conditions on fracture toughness of an asphalt concrete, prevalently employed in Ardabil road networks, under tensile (mode I) and shear (mode II) loading. An improved semi-circular bend (SCB) specimen was employed to carry out the fracture experiments. These experiments were performed in two different weather conditions namely fixed and cyclic temperatures. The results showed that consideration of the impact of temperature cycling resulted in decreasing the fracture toughness of asphalt concrete significantly. Furthermore, the fracture toughness was highly affected by loading mode for the both fixed and cyclic temperature conditions studied in this paper. In addition, it was found that the MTS criterion correctly predicts the onset of fracture initiation although this prediction was slightly conservative.

키워드

과제정보

연구 과제 주관 기관 : university of Mohaghegh Ardabili

참고문헌

  1. Anderson, D.A., Christensen, D.W., Dongre, R., Sharma, M.G., Runt, J. and Jordhal, P. (1990), "Asphalt behavior at low temperatures", Publication No. FHWA-RD-88-078, RHWA, US Dept. of Transportation.
  2. Ayatollahi, M.R., Pirmohammad, S. and Sedighiani, K. (2014), "Three-dimensional finite element modeling of a transverse top-down crack in asphalt concrete", Comput. Concrete, 13(4), 569-585. https://doi.org/10.12989/cac.2014.13.4.569
  3. Dongre, R., Sharma, M.C.l. and Anderson, D.A. (1989), "Development of fracture criterion for asphalt mixes at low temperatures", Transp. Res. Rec., 1228, 94-105.
  4. Erdogan, F. and Sih, G.C. (1963), "On the crack extension in plates under plane loading and transverse shear", J. Basic Eng., 85(4), 519-525. https://doi.org/10.1115/1.3656897
  5. Graf, B. and Werner, G. (1993), "Design of asphalt overlay fabric system against reflective cracking", Proceeding of 2nd International RILEM Conference On Reflective Cracking In Pavements, 159-67.
  6. Irwin, G.R. (1997), "Analysis of stresses and strains near the end of a crack traversing a plate", SPIE MILESTONE SERIES MS, 137, 167-170.
  7. Khattak, M.J., Baladi, G.Y. and Drzal, L.T. (2007), "Low temperature binder-aggregate adhesion and mechanistic characteristics of polymer modified asphalt mixtures", Mater. Civil Eng., 19(5), 411-422. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:5(411)
  8. Kim, K.W. and El-Hussein, M. (1995), "Effect of differential thermal contraction on fracture toughness of asphalt materials at low temperatures", J. Assoc. Asphalt Paving Technol., 64, 479-499.
  9. Li, X. and Marasteanu, M. (2004), "Evaluation of the low temperature fracture resistance of asphalt mixtures using the semi circular bend test", J. Assoc. Asphalt Paving Technol., 73, 401-426.
  10. Lim, I.L. and Johnston, I.W. (1994), "Fracture testing of a soft rock with semi-circular specimens under three point bending Part1-Mode I", Int. J. Rock Mech. Min. Sci., 31(3), 199-212.
  11. Majidzadeh, K., Kaufmann E.M., Ramsamooj, D.V. (1971), "Application of fracture mechanics in the analysis of pavement fatigue", J. Assoc. Asphalt Paving Technol., 40, 227-246.
  12. Molenaar, A.A.A. (1993), "Evaluation of pavement structure with emphasis on reflective cracking", Proceeding of 2nd International RILEM Conference on Reflective Cracking In Pavements, 21-48.
  13. Shokrieh, M.M., Heidari-Rarani, M., Shakouri, M. and Kashizadeh, E. (2011), "Effects of thermal cycles on mechanical properties of an optimized polymer concrete", Constr. Build. Mater., 25(8), 3540-3549. https://doi.org/10.1016/j.conbuildmat.2011.03.047
  14. Sih, G.C. (1974); "Strain-energy-density factor applied to mixed mode crack problems"; Int. J. Fract., 10(3), 305-321. https://doi.org/10.1007/BF00035493
  15. Tekalur, S.A., Shukla, A., Sadd, M. and Lee, K.W. (2008), "Mechanical characterization of a bituminous mix under quasi-static and high-strain rate loading", Constr. Build. Mater., 23(5), 1795-1802. https://doi.org/10.1016/j.conbuildmat.2008.09.021
  16. Wagoner, M.P., Buttlar, W.G. and Paulino, G.H. (2005), "Disk-shaped compact tension test for asphalt concrete fracture", Exp. Mech., 45(3), 270-277. https://doi.org/10.1007/BF02427951

피인용 문헌

  1. Effect of recycled glass powder on asphalt concrete modification vol.59, pp.2, 2016, https://doi.org/10.12989/sem.2016.59.2.373
  2. Mixed Mode I/II Fracture Strength of Modified HMA Concretes Subjected to Different Temperature Conditions vol.47, pp.5, 2016, https://doi.org/10.1520/jte20180848
  3. Fracture Resistance of HMA Mixtures Modified with Nanoclay and Nano-Al2O3 vol.47, pp.5, 2016, https://doi.org/10.1520/jte20180919
  4. Investigating the Effect of Aggregate Characteristics on the Macroscopic and Microscopic Fracture Mechanisms of Asphalt Concrete at Low-Temperature vol.12, pp.17, 2019, https://doi.org/10.3390/ma12172675
  5. Experimental investigation of fracture properties of asphalt mixtures modified with Nano Fe2O3 and carbon nanotubes vol.21, pp.8, 2016, https://doi.org/10.1080/14680629.2019.1608289
  6. Evaluation of fracture resistance of asphalt concrete involving Calcium Lignosulfonate and Polyester fiber under freeze–thaw damage vol.117, pp.None, 2022, https://doi.org/10.1016/j.tafmec.2021.103168