Computers and Concrete

  • 제17권4호
  • /
  • Pages.455-475
  • /
  • 2016
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Theoretical and experimental dynamic characteristics of a RC building model for construction stages

  • Turker, Temel (Karadeniz Technical University, Department of Civil Engineering) ;
  • Bayraktar, Alemdar (Karadeniz Technical University, Department of Civil Engineering)
  • 투고 : 2014.07.21
  • 심사 : 2016.02.04
  • 발행 : 2016.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Dynamic characteristics, named as natural frequencies, damping ratios and mode shapes, affect the dynamic behavior of buildings and they vary depending on the construction stages. It is aimed to present the effects of construction stages on the dynamic characteristics of reinforced concrete (RC) buildings considering theoretical and experimental investigations. For this purpose, a three-storey RC building model with a 1/2 scale was constructed in the laboratory of Civil Engineering Department at Karadeniz Technical University. The modal testing measurements were performed by using Operational Modal Analysis (OMA) method for the bare frame, brick walled and coated cases of the building model. Randomly generated loads by impact hammer were used to vibrate the building model; the responses were measured by uni-axial seismic accelerometers as acceleration. The building's modal parameters at these construction stages were extracted from the processed signals using the Enhanced Frequency Domain Decomposition (EFDD) technique. Also, the finite element models of each case were developed and modal analyses were performed. It was observed from the experimental and theoretical investigations that the natural frequencies of the building model varied depending on the construction stages considerably.

키워드

과제정보

연구 과제 주관 기관 : TUBITAK, Karadeniz Technical University

참고문헌

  1. Arslan, M.E. and Durmus, A. (2013), "Stage effect on the dynamic characteristics of RC frame using operational modal analysis", Comput. Concrete, 12(1), 79-90. https://doi.org/10.12989/cac.2013.12.1.079
  2. Bayraktar, A., Turker, T., Altunisik, A.C., Sevim, B., Sahin, A. and Ozcan, D.M. (2010), "Determination of dynamic parameters of buildings by operational modal analysis method", Tech. J., 21(4), 5185-5205.
  3. Boroschek, R.L. and Yanez, F.V. (2000), "Experimental verification of basic analytical assumptions used in the analysis of structural wall buildings", Eng. Struct., 22(6), 657-669. https://doi.org/10.1016/S0141-0296(99)00007-3
  4. Brincker, R., Zhang, L. and Andersen, P. (2000), "Output-only modal analysis by frequency domain decomposition", Proceedings of the ISMA25 Noise and Vibration Engineering, Leuven, Belgium.
  5. Brownjohn, J.M.W., Xia, P.Q., Hao, H. and Xia, Y. (2001), "Civil structure condition assessment by FE model updating: Methodology and case studies", Finite Elem. Anal. Des., 37(10), 761-775. https://doi.org/10.1016/S0168-874X(00)00071-8
  6. Ellis, B.R. and Bougard, A.J. (2001), "Dynamic testing and stiffness evaluation of a six-storey timber framed building during construction", Eng. Struct., 23(10), 1232-1242. https://doi.org/10.1016/S0141-0296(01)00033-5
  7. Ewins, D.J. (1995), Modal Testing: Theory and Practice, John Wiley & Sons. New York.
  8. Gorl, E. and Link, M. (2003), "Damage identification using changes of eigenfrequencies and mode shapes", Mech. Syst. Signal Pr., 17(1), 103-110. https://doi.org/10.1006/mssp.2002.1545
  9. Heylen, W., Stefan, L. and Sas, P. (2007), "Modal analysis theory and testing", Katholieke University Leuven, Faculty of Engineering, Department of Mechanical Engineering. Leuven, Belgium.
  10. Kose, M.M. (2009), "Parameters affecting the fundamental period of RC buildings with infill walls", Eng. Struct., 31(1), 93-102. https://doi.org/10.1016/j.engstruct.2008.07.017
  11. Maia, N. and Silva, J. (1997), "Theoretical and experimental modal analysis", Research Studies Press, Taunton.
  12. Memari, A.M., Aghakouchak, A.A., Ashtiany, M.G. and Tiv, M. (1999), "Full-scale dynamic testing of a steel frame building during construction", Eng. Struct., 21(12), 1115-1127. https://doi.org/10.1016/S0141-0296(98)00068-6
  13. Michel, C., Gueguen, P. and Barda, P.Y. (2008), "Dynamic parameters of structures extracted from ambient vibration measurements: An aid for the seismic vulnerability assessment of existing buildings in moderate seismic hazard regions", Soil Dyn. Earthq. Eng., 28(8), 593-604. https://doi.org/10.1016/j.soildyn.2007.10.002
  14. OMA (2006), "Operational modal analysis, release 4.0", Structural Vibration Solution A/S, Denmark.
  15. SAP 2000 (2008), "Integrated finite element analysis and design of structures", Comput. Struct. Inc., Berkeley, California, USA.
  16. Sevim, B., Altunisik A.C. and Bayraktar, A. (2014), "Construction stages analyses using time dependent material properties of concrete arch dams", Comput. Concrete, 14(5), 599-612. https://doi.org/10.12989/cac.2014.14.5.599
  17. Zonta, D., Elgamal, A., Fraser, M. and Priestley, M.J.N. (2008), "Analysis of change in dynamic properties of a frame-resistant test building", Eng. Struct., 30(1), 183-196. https://doi.org/10.1016/j.engstruct.2007.02.022