Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지
DOI QR코드

DOI QR Code

De-Ash Characteristics using a Cleaning Agent KOH of CDPF for PM Reduction of Diesel Engines

  • Seo, Choong-Kil (Department of Automotive & Mechanical Engineering, Howon university)
  • Received : 2015.09.13
  • Accepted : 2016.02.05
  • Published : 2016.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

The objective of this study is to investigate the physicochemical properties of the catalysts and the feasibility of remanufacturing them after removing ash in CDPF using a cleaning agent KOH. Compared with the carbon oxidation ability of fresh CDPF, that of de-ashed CDPF had an insignificant difference due to the low activation energy of CO and $CO_2$. As ash deposited in CDPF was de-ashed with KOH, it had a practical feasibility on remanufacturing point of view, but washcoat was melted about 26%. Further studies were required for the prevention of washcoat loss.

Keywords

References

  1. C. K. Seo, H. N. Kim, B. C. Choi, M. T. Lim, C. H. Lee and C. B. Lee, 2011, "De-NOx Characteristics of a Combined System of LNT and SCR Catalysts according to Hydrothermal Aging and Sulfur Poisoning", Catalysis Today, Vol. 164, pp. 507-514. https://doi.org/10.1016/j.cattod.2010.10.010
  2. C. K. Seo, K. C. Oh, 2015. De-ash characteristics of CDPF using KOH. KSAE15-B0411H.
  3. W. S. Kang, B. C. Choi and H. N. Kim, 2013. Characteristics of the simultaneous removal of PM and NOx using CuNb-ZSM-5 coated on diesel particulate filter. J. Ind. Eng. Chem.19, pp. 1406-1412. https://doi.org/10.1016/j.jiec.2013.01.004
  4. H. S. Kim, H. H. Choi, G. B. Cho, Y. I. Jeong, S. H. Cho and J. S. Park, 2008, Development of a catalytic combustor for DPF regeneration of in-use light duty diesel vehicles. KSAE 16, pp. 168-175.
  5. J. W. Kang, M. Y. Kim and G. J. Youn, 2005, A study on the combustion optimization of a common rail direct injection diesel engine for regeneration of the diesel particulate filter. KSAE 13, pp. 167-173.
  6. B. B. Hansen, 2013, "Performance of diesel particulate filter catalysts in the presence of biodiesel ash species", Fuel 106, pp. 234-240. https://doi.org/10.1016/j.fuel.2012.11.038
  7. Y. Wang, 2014, "Effect of lubricating oil additive package on the characterization of diesel particles", Appl Energ. 136, pp. 682-691. https://doi.org/10.1016/j.apenergy.2014.09.054
  8. H. Wang, 2014, "Liquid antimony anode direct carbon fuel cell fueled with mass-produced de-ash coal", Energ. 75, pp. 555-559. https://doi.org/10.1016/j.energy.2014.08.017
  9. R. E. Masto, E. Sarkar, J. George, K. Jyoti, P. Dutta and L. C. Ram, 2015, "PAHs and potentially oxic elements in the fly ash and bed ash of biomass fired power plants", Fuel Process. Technol. 132, pp. 139-152. https://doi.org/10.1016/j.fuproc.2014.12.036
  10. N. Maier, K. G. Nickel, C. Engel and A. Mattern, 2010, "Mechanism and orientation dependence of the corrosion of single crystal cordierite by model diesel particulate ashes", J. Eur. Ceram. Soc. 30, pp. 1629-1640. https://doi.org/10.1016/j.jeurceramsoc.2010.01.018
  11. G. A. Merkel, W. A. Culter and C. J. Warren, "Thermal durability of wall-flow ceramic diesel particulate filters", SAE paper No. 2001-01-0190.
  12. Liu Bao, 2008, "Hydrothermal aging effects of ash material and alkali metal on SiC-DPF and Pt catalyzed SiC-DPF", Dissertation for the degree of the master, Chonam National University.
  13. Alexander G. Sappok, Ash Accumulation in Diesel Particulate Filters, www.DieselNet.com.
  14. C. K. Seo, 2013, "Physicochemical characteristics based on hydrothermal aging of prepared DOC", J. KSPSE 17, pp. 13-22.

Cited by

  1. Ash 세정제에 따른 CDPF의 물리화학적 특성 vol.18, pp.4, 2017, https://doi.org/10.5762/kais.2017.18.4.641