Acknowledgement
Supported by : City University of Hong Kong
References
- Afiq W.M.Y., Azwadi C.S.N. and Saqr, K.M. (2012), "Effects of buildings aspect ratio, wind speed and wind direcion on flow structure and pollutant dispersion in symmetric street canyons: A review", Int. J. Mech. Mater. Eng., 7(2),158-165.
- Blocken, B. andCarmeliet, J. (2004), "Pedestrian wind environment around buildings: Literature review and practical examples", J. Build.Phys., 28(2),107-159. https://doi.org/10.1177/1097196304044396
- Blocken, B. and Stathopoulos, T. (2013), "CFD simulation of pedestrian-level wind conditions around buildings: Past achievements and prospects", J. Wind Eng. Ind. Aerod., 121, 138-145. https://doi.org/10.1016/j.jweia.2013.08.008
- Blocken, B. (2014), "50 years of computational wind engineering: Past, present and future", J. Wind Eng. Ind. Aerod., 129, 69-102. Retrieved November 3, 2014. https://doi.org/10.1016/j.jweia.2014.03.008
- Blocken, B. (2015), "Computational fluid dynamics for urban physics: Importance, scales, possibilities, limitations and ten tips and tricks towards accurate and reliable simulations", Build. Environ., 91, 219-245. https://doi.org/10.1016/j.buildenv.2015.02.015
- Cheng, C.K.C., Lam, K.M., Leung, Y.T.A., Yang, K., Danny, H.W.L. and Sherman, C.P.C. (2011), "Wind-induced natural ventilation of re-entrant bays in a high-rise building", J. Wind Eng. Ind. Aerod., 99(2-3),79-90. https://doi.org/10.1016/j.jweia.2010.11.002
- Chow, T.T., Lin, Z. and Liu, J.P. (2002), "Effect of condensing unit layout at building re-entrant on split-type air-conditioner performance", Architect. Sci. Rev., 45(1), 3-11. https://doi.org/10.1080/00038628.2002.9696930
- Franke, J., Antti Hellsten, H.S. and Bertrand, C. (2007), Best Practice Guideline for the CFD Simulation of Flows in the Urban Environment.
- Gao, N.P., Niu, J.L., Perino, M. and Heiselberg., P. (2009), "The airborne transmission of infection between flats in high-rise residential buildings: Tracer gas simulation", Build. Environmen, 44, 402-410. https://doi.org/10.1016/j.buildenv.2008.03.016
- Gomes, M.G., Rodrigues, A.M. and Mendes, P. (2005), "Experimental and numerical study of wind pressures on irregular-plan shapes", J. Wind Eng. Ind. Aerod., 93(10), 741-756. https://doi.org/10.1016/j.jweia.2005.08.008
- Hang, J., Li, Y., Sandberg, M., Buccolieri, R. and Sabatino, S.D. (2012), "The influence of building height variability on pollutant dispersion and pedestrian ventilation in idealized high-rise urban areas", Build. Environ., 56, 346-360. https://doi.org/10.1016/j.buildenv.2012.03.023
- Higson, H.L., Griffiths, R.F., Jones, C.D. and Hall, D.J. (1996), "Flow and dispersion around an isolated building", Atmosph. Environ., 30(16), 2859-2870. https://doi.org/10.1016/1352-2310(95)00313-4
- Janssen, W.D., Blocken, B. and van Hooff, T. (2013), "Pedestrian wind comfort around buildings: Comparison of wind comfort criteria based on whole-flow field data for a complex case study", Build. Environment, 59, 547-562. https://doi.org/10.1016/j.buildenv.2012.10.012
- Kubota, T., Miura, M., Tominaga, Y. and Mochida, A. (2008), "Wind tunnel tests on the relationship between building density and pedestrian-level wind velocity: Development of guidelines for realizing acceptable wind environment in residential neighborhoods", Build. Environ., 43(10), 1699-1708. https://doi.org/10.1016/j.buildenv.2007.10.015
- Ng, E. (2009), "Policies and technical guidelines for urban planning of high-density cities-Air Ventilation Assessment (AVA) of Hong Kong", Build. Environ., 44(7), 1478-1488. https://doi.org/10.1016/j.buildenv.2008.06.013
- Santos, J.M., Griffiths, R.F., Roberts, I.D. and Reis, N.C. (2005), "A field experiment on turbulent concentration fluctuations of an atmospheric tracer gas in the vicinity of a complex-shaped building", Atmos. Environ., 39(28), 4999-5012. https://doi.org/10.1016/j.atmosenv.2005.05.005
- Snyder, W.H. (1972), "Similarity criteria for the application of fluid models to the study of air pollution meteorology", Bound.-Lay. Meteorol., 3, 113-134. https://doi.org/10.1007/BF00769111
- Stathopoulos, T., Wu, H. and Bedard, C. (1992), "Wind environment around buildings: A knowledge-based approach", J. Wind Eng. Ind. Aerod., 44(1-3), 2377-2388. https://doi.org/10.1016/0167-6105(92)90028-9
- Stathopoulos, T. (2006), "Pedestrian level winds and outdoor human comfort", J. Wind Eng. Ind. Aerod., 94(11), 769-780. https://doi.org/10.1016/j.jweia.2006.06.011
- Tominaga, Y., Mochida, A., Yoshie, R., Kataoka, H., Nozu, T., Yoshikawa, M. and Shirasawa, T. (2008), "AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings", J. Wind Eng. Ind. Aerod., 96(10-11), 1749-1761. https://doi.org/10.1016/j.jweia.2008.02.058
- Tsang, C.W., Kwok, K.C.S. and Hitchcock, P.A. (2012), "Wind tunnel study of pedestrian level wind environment around tall buildings: Effects of building dimensions, separation and podium", Build. Environ., 49, 167-181. https://doi.org/10.1016/j.buildenv.2011.08.014
- Wang, Y., Zhou, Y. Zhu, Y. and Tse Tim, K.T. (2012), "Numerical prediction of wind flow around irregular models", J. Fluids Eng., 134(7), 071108. https://doi.org/10.1115/1.4006225
- Wong, S.Y. and Lam, K.M. (2013), "Effect of recessed cavities on wind-induced loading and dynamic responses of a tall building", J. Wind Eng. Ind. Aerod., 114, 72-82. https://doi.org/10.1016/j.jweia.2012.12.013
- Yang, F., Kang, Y., Gao, Y. and Zhong, K. (2015), "Numerical simulations of the effect of outdoor pollutants on indoor air quality of buildings next to a street canyon", Build. Environ., 87, 10-22. https://doi.org/10.1016/j.buildenv.2015.01.008
- Yeung, K.H., and Yu, I.T.S. (2007), "Possible meteorological influence on the Severe Acute Respiratory Syndrome (SARS) community outbreak at amoy gardens,Hong Kong", J. Environ. Health, 70(3), 39-46.
- Zhang, Y., Kwok, K.C.S., Liu, X.P. and Niu, J.L. (2015), "Characteristics of air pollutant dispersion around a high-rise building", Environmental pollution (Barking, Essex : 1987), 204, 280-288. https://doi.org/10.1016/j.envpol.2015.05.004