DOI QR코드

DOI QR Code

Transfer length of 2400 MPa seven-wire 15.2 mm steel strands in high-strength pretensioned prestressed concrete beam

  • Yang, Jun-Mo (Product Application Center, POSCO) ;
  • Yim, Hong-Jae (Department of Construction and Disaster Prevention Engineering, Kyungpook National University) ;
  • Kim, Jin-Kook (Product Application Center, POSCO)
  • 투고 : 2015.12.28
  • 심사 : 2016.02.26
  • 발행 : 2016.04.25

초록

In this study, the transfer length of 2400 MPa, seven-wire high-strength steel strands with a 15.2 mm diameter in pretensioned prestressed concrete (PSC) beams utilizing high strength concrete over 58 MPa at prestress release was evaluated experimentally. 32 specimens, which have the variables of concrete compressive strength, concrete cover depth, and the number of PS strands, were fabricated and corresponding transfer lengths were measured. The strands were released gradually by slowly reducing the pressure in the hydraulic stressing rams. The measured results of transfer length showed that the transfer length decreased as the concrete compressive strength and concrete cover depth increased. The number of strands had a very small effect, and the effect varied with both the concrete cover depth and concrete strength. The results were compared to current design codes and transfer lengths predicted by other researchers. The comparison results showed that the current transfer length prediction models in design codes may be conservatively used for 2400 MPa high-strength strands in high-strength concrete beams exceeding 58 MPa at prestress release.

키워드

참고문헌

  1. ACI Committee 318 (2008), Building code requirements for structural concrete (ACI 318-08) and commentary, American Concrete Institute, Farmington Hills, MI.
  2. Balazs, G. (1992), "Transfer control of prestressing strands", PCI J., 37(6), 60-71. https://doi.org/10.15554/pcij.11011992.60.71
  3. Briere, V., Harries, K.A., Kasanc, J. and Hagerd, C. (2013), "Dilation behavior of seven-wire prestressing strand-The Hoyer effect", Constr. Build. Mater., 40, 650-658. https://doi.org/10.1016/j.conbuildmat.2012.11.064
  4. CEN (2004), EN 1992-1-2 Eurocode 2: Design of concrete structures. Part 1-2: General rules-structural fire design Comite Europeen de Normalisation, Brussels, Belgium.
  5. Cousins, T., Johnston, D. and Zia, P. (1990), "Transfer and development length of epoxy-coated and uncoated prestressing strand", PCI J., 35(4), 92-103. https://doi.org/10.15554/pcij.07011990.92.103
  6. Hanson, N.W. (1969), "Influence of surface roughness of prestressing strand in bond performance", PCI J., 14(1), 32-45
  7. Kaar, P.H. and Hanson, N.W. (1975), "Bond fatigue tests of beams simulating pretensioned concrete crossties", PCI J., 20(5), 65-80. https://doi.org/10.15554/pcij.09011975.65.80
  8. Kim, J.K., Seong, T.R., Jang, K.P. and Kwon, S.H. (2013), "Tensile behavior of new 2,200 MPa and 2,400 MPa strands according to various types of mono anchorage", Struct. Eng. Mech., 47(3), 383-399. https://doi.org/10.12989/sem.2013.47.3.383
  9. KS D7002 (2011), Uncoated stress-relieved steel wires and strands for prestressed concrete, Korean Standards Association, Seoul, Korea.
  10. Marti-Vargas, J.R., Arbelaez, C.A., Serna, P., Navarro-Gregori, J. and Pallares-Rubio, L. (2007), "Anlaytical model for transfer length prediction of 13 mm prestressing strand", Struct. Eng. Mech., 26(2), 211-229. https://doi.org/10.12989/sem.2007.26.2.211
  11. Mitchell, D., Cook, W.D., Khan, A.A. and Tham, T. (1993), "Influence of high strength concrete on transfer and development length of pretensioning strand", PCI J., 38(3), 52-66.
  12. Oh, B.H., Lim, S.N., Lee, M.K. and Yoo, S.W. (2014), "Analysis and prediction of transfer length in pretensioned, prestressed concrete members", ACI Struct. J., 111(3), 549-560.
  13. Pozolo, A.M. and Andrawes, B. (2011), "Transfer length in prestressed self-consolidating concrete box and I-girders", ACI Struct. J., 108(3), 341-349.
  14. Russell, B.W. and Burns, N.H. (1997). "Measurement of transfer lengths on pretensioned concrete elements", J. Struct. Eng.-ASCE, 123(5), 541-549. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(541)
  15. Yim, H.J., Kim, J.K. and Yang, J.M. (2015), "Experimental study on the transfer length in pretensioned prestressed concrete beam using 2,400 MPa PS strand", J. Korean Soc. Hazard Mitig., 15(2), 41-49. https://doi.org/10.9798/KOSHAM.2015.15.2.41
  16. Zi, G., Rabczuk, T. and Wall, W. (2007), "Extended meshfree methods without branch enrichment for cohesive cracks", Comput. Mech., 40(2), 367-382. https://doi.org/10.1007/s00466-006-0115-0
  17. Zia, P. and Mostafa, T. (1977), "Development length of prestressing strands", PCI J., 22(5), 54-65. https://doi.org/10.15554/pcij.09011977.54.65

피인용 문헌

  1. Static and Cryogenic Performance Evaluation of 2400 MPa PT Anchorage System for Applying LNG Storage Tank vol.18, pp.6, 2018, https://doi.org/10.9798/KOSHAM.2018.18.6.213
  2. Transfer length in full-scale pretensioned concrete beams with 1.4 m and 2.4 m section depths vol.171, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.05.104
  3. Development and application of a hybrid prestressed segmental concrete girder utilizing low carbon materials vol.69, pp.4, 2016, https://doi.org/10.12989/sem.2019.69.4.371
  4. Prediction of Transfer Lengths Inclusive of Conventional and High-Strength Strands vol.146, pp.9, 2016, https://doi.org/10.1061/(asce)st.1943-541x.0002765