DOI QR코드

DOI QR Code

A Three-phase Hybrid Power Flow Algorithm for Meshed Distribution System with Transformer Branches and PV Nodes

  • Li, Hongwei (School of Electrical and Electronic Engineering, Southwest Petroleum University) ;
  • Wu, Huabing (School of Electrical and Electronic Engineering, Southwest Petroleum University) ;
  • Jiang, Biyu (School of Electrical and Electronic Engineering, Southwest Petroleum University) ;
  • Zhang, Anan (School of Electrical and Electronic Engineering, Southwest Petroleum University) ;
  • Fang, Wei (School of Electrical and Electronic Engineering, Southwest Petroleum University)
  • 투고 : 2013.12.02
  • 심사 : 2015.10.05
  • 발행 : 2016.01.01

초록

Aiming at analyzing the power flow of the distribution systems with distribution transformer (DT) branches and PV nodes, a hybrid three-phase power flow methodology is presented in this paper. The incidence formulas among node voltages, loop currents and node current injections have been developed based on node-branch incidence matrix of the distribution network. The method can solve the power flow directly and has higher efficiency. Moreover, the paper provides a modified method to model DT branches by considering winding connections, phase shifting and off-nominal tap ratio, and then DT branches could be seen like one transmission line with the proposed power flow method. To deal with the PV nodes, an improved approach to calculate reactive power increment at each PV node was deduced based on the assumption that the positive-sequence voltage magnitude of PV node is fixed at a given value. Then during calculating the power flow at each iteration, it only needs to update current injection at each PV node with the proposed algorithm. The process is very simple and clear. The results of IEEE 4 nodes and the modified IEEE 34 nodes test feeders verified the correctness and efficiency of the proposed hybrid power flow algorithm.

키워드

참고문헌

  1. T. Chen, M. Chen, K. Hwang, P. Kotas, and E. Chebli, “Distribution system power flow analysis: A rigid approach,” IEEE Trans. Power Deliv., vol. 6, no. 3, pp. 1146-1152, 1991. https://doi.org/10.1109/61.85860
  2. Ray D. Zimmerman, Hsiao-Dong Chiang, “Fast decoupled power flow for unbalanced radial distribution systems,” IEEE Trans. Power Syst., vol. 10, no. 4, pp. 2045-2051, 1995. https://doi.org/10.1109/59.476074
  3. Zhang F, Cheng C S, “A Modified Newton Method for Radial Distribution System Power Flow Analysis,” IEEE Trans. Power Syst., vol. 12, no. 1, pp. 389-397, 1997.
  4. P. A. N. Garcia, J. L. R. Pereira, S. Carneiro, et al, “Three-phase power flow calculations using the current injection method,” IEEE Trans. Power Syst., vol.15, no. 2, pp. 508-514, 2000.
  5. M. Abdel-Akher, K. Nor, and A. Rashid, “Improved three-phase power-flow methods using sequence components,” IEEE Trans. Power Syst., vol. 20, no. 3, pp. 1389-1397, 2005. https://doi.org/10.1109/TPWRS.2005.851933
  6. Shirmohammadi D, Hong H W, Semlyen A, et al, “A compensation-based power flow method for weakly meshed distribution and transmission networks,” IEEE Trans. on Power Syst., vol. 3, no. 2, pp. 753-761, 1988. https://doi.org/10.1109/59.192932
  7. Luo G X, Semlyen A, “Efficient load flow for large weakly meshed networks,” IEEE Trans. on Power Syst., vol. 5, no. 4, pp. 1309-1316, 1990.
  8. C. Cheng and D. Shirmohammadi, “A three-phase power flow method for real-time distribution system analysis,” IEEE Trans. Power Syst., vol. 10, no. 2, pp. 671-679, May 1995. https://doi.org/10.1109/59.387902
  9. Teng J H, “A direct approach for distribution system load flow solutions,” IEEE Trans. on Power Deliv., vol.18, no.3, pp. 882-887, 2003.
  10. W.C. Wu , B.M. Zhang, “A three-phase power flow algorithm for distribution system power flow based on loop-analysis method,” Int. J. Elect. Power and Energy Syst., vol. 30, no. 1, pp. 8-15, 2008. https://doi.org/10.1016/j.ijepes.2007.06.005
  11. Augugliaro, L. Dusonchet, S. Favuzza, et al, “A backward sweep method for power flow solution in distribution networks,” Int. J. Elect. Power and Energy Syst., vol. 32, no. 1, pp. 271-280, 2010. https://doi.org/10.1016/j.ijepes.2009.09.007
  12. T. H. Chen, M. S. Chen, T. Inoue, P. Kotas, and E. A. Chebli, “Three phase cogenerator and transformer models for distribution system analysis,” IEEE Trans. Power Deliv., vol.6, no.4, pp1671-1681, 1991. https://doi.org/10.1109/61.97706
  13. Mesut E. Baran, Eric A. Staton, “Distribution Transformer Models for Branch Current Based Feeder Analysis,” IEEE Trans. on Power Syst., vol. 12, no. 2, pp. 698-703, 1997. https://doi.org/10.1109/59.589655
  14. Chen T. H., Yang W. C., Guo T. Y., and Pu G. C., “Modeling and analysis of asymmetrical three-phase distribution transformer banks with mid-tap connected to the secondary neutral conductor,” Elect. Power Syst. Research, vol. 54, no. 2, pp. 83-89, 2000. https://doi.org/10.1016/S0378-7796(99)00075-9
  15. Irving M. R. and Al-Othman A. K., “Admittance matrix models of three-phase transformers with various neutral grounding configurations,” IEEE Trans. Power Syst., vol. 18, no. 3, pp. 1210-1212, Aug. 2003. https://doi.org/10.1109/TPWRS.2003.814905
  16. Xiao P., Yu D.C., and Yan W., "A Unified Three-Phase Transformer Model for Distribution Load Flow Calculations," IEEE Trans. Power Syst., vol. 21, no. 3, pp. 153-159, 2006. https://doi.org/10.1109/TPWRS.2005.857847
  17. Wang Z., Chen F., and Li J., “Implementing transformer nodal admittance matrices into backward / forward sweep-based power flow analysis for unbalanced radial distribution systems,” IEEE Trans. Power Syst., vol. 19, no. 4, pp. 1831-1836, 2004. https://doi.org/10.1109/TPWRS.2004.835659
  18. LI hong-wei, LIU Qing-you, SHEN Xia, “A Three-Phase Unbalanced Power Flow Solution with Three-phase Distribution Transformers,” in Proceedings of DRPT2011, Weihai, China, pp. 831-836, July, 2011.
  19. R. Palma-Behnke, J.L.A. Cerda, L.S. Vargas, A. Jofre, “A distribution company energy acquisition market model with integration of distributed generation and load curtailment options,” IEEE Trans. Power Syst., vol. 20, no. 4, pp. 1718-1727, 2005. https://doi.org/10.1109/TPWRS.2005.857284
  20. Pecas Lopes J A, Hatziargyriou N, Mutale J, et al, “Integrating distributed generation into electric power systems: a review of drivers, challenges and opportunities,” Elect. Power Syst. Research, vol.77, no. 9, pp. 1189-1203, 2007. https://doi.org/10.1016/j.epsr.2006.08.016
  21. Y. Zhu and K. Tomsovic, “Adaptive power flow method for distribution systems with dispersed generation,” IEEE Trans. Power Deliv., vol. 17, no. 7, pp. 822-827, 2002.
  22. Ding M., Guo X.F. , "Three-phase power flow for the weakly meshed distribution network with the distributed generation," Proceedings of the CSEE, vol. 29, no. 13, pp. 35-40, 2009.
  23. Li H.W., Sun H.B., Zhang A, et al, "Positive-sequence component based three-phase unbalanced power flow solution for distribution system with PV nodes," Proceedings of the CSEE, vol. 32, no. 1, pp. 115-121, 2012.
  24. Hongwei Li, Anan Zhang, Xia Shen, Jin Xu, “A load flow method for weakly meshed distribution networks using powers as flow variables,” Int. J. Elect. Power and Energy Syst., vol. 58, pp. 291-299, 2014 https://doi.org/10.1016/j.ijepes.2014.01.015
  25. Distribution System Analysis Subcommittee. Radial distribution test feeders [EB/OL]. http://ewh.ieee.org/soc/pes/dsacom/testfeeders/index.html.
  26. William H. Kersting, Distribution System Modeling and Analysis. 2nd. New York: Taylor & Francis, 2007.

피인용 문헌

  1. The second-order cone programming method for interval power flow of active distribution network with distributed generation 2018, https://doi.org/10.1002/tee.22619
  2. A three-phase linear load flow solution based on loop-analysis theory for distribution system pp.0332-1649, 2018, https://doi.org/10.1108/COMPEL-03-2018-0115