References
- Schwenke, H., Knapp, W., Haitjema, H., Weckenmann, A., Schmitt, R., et al., "Geometric Error Measurement and Compensation of Machines- An Update," College International Pour la Recherche en Productique Annals-Manufacturing Technology, Vol. 57, No. 2, pp. 660-675, 2008.
- Ramesh, R., Mannan, M. A., and Poo, A., "Error Compensation in Machine Tools - A Review Part I: Geometric, Cutting-Force Induced and Fixture- Dependent Errors," International Journal of Machine Tools and Manufacture, Vol. 40, No. 9, pp. 1235-1256, 2000. https://doi.org/10.1016/S0890-6955(00)00009-2
- Kiridena, V. and Ferreira, P. M., "Mapping the Effect of Positioning Errors on the Volumetric Accuracy of Five-Axis CNC Machine Tools," International Journal of Machine Tools and Manufacture, Vol. 33, No. 3, pp. 417-437, 1993. https://doi.org/10.1016/0890-6955(93)90049-Z
- Lee, K.-I. and Yang, S.-H., "Measurement and Verification of Position-Independent Geometric Errors of a Five-Axis Machine Tool Using a Double Ball-Bar," International Journal of Machine Tools and Manufacture, Vol. 70, pp. 45-52, 2013. https://doi.org/10.1016/j.ijmachtools.2013.03.010
- Lee, K.-I., Lee, J.-C., and Yang, S.-H., "The Optimal Design of a Measurement System to Measure the Geometric Errors of Linear Axes," The International Journal of Advanced Manufacturing Technology, Vol. 66, No. 1-4, pp. 141-149, 2013. https://doi.org/10.1007/s00170-012-4312-z
- Castro, H. and Burdekin, M., "Dynamic Calibration of the Positioning Accuracy of Machine Tools and Coordinate Measuring Machine Using a Laser Interferometer," International Journal of Machine Tools & Manufacture, Vol. 43, No. 9, pp. 947-954, 2003. https://doi.org/10.1016/S0890-6955(03)00083-X
- Chen, G., Yuan, J., and Ni, J., "A Displacement Measurement Approach for Machine Geometric Error Assessment," International Journal of Machine Tools and Manufacture, Vol. 41, No. 1, pp. 149-161, 2001. https://doi.org/10.1016/S0890-6955(00)00049-3
- ISO No. 230-1, "Test Code for Machine Tools - Part 1: Geometric Accuracy of Machines Operating under No-Load or Finishing Conditions," 1996.
- Renishaw, "XL-80 Laser System: Portable Laser Measurement and Calibration," 2013.
- Keysight Technologies, "Keysight 5530 Laser Calibration System: Verify Machine Performance with the World Standard for Laser-based Metrology," 2014.
- Lee, D.-M., Lee, H.-H., and Yang, S.-H., "Analysis of Squareness Measurement Using a Laser Interfero-Meter," J. Korean Soc. Precis. Eng., Vol. 14, No. 10, pp. 1839-1846, 2013.
- Zhang, G., Ouyang, R., Lu, B., Hocken, R., Veale, R., et al., "A Displacement Method for Machine Geometry Calibration," College International Pour la Recherche en Productique Annals-Manufacturing Technology, Vol. 37, No. 1, pp. 515-518, 1988.
- ISO No. 230-6, "Test Code for Machine Tools-Part 6: Determination of Positioning Accuracy on Body and Face Diagonals (Diagonal Displacement Tests)," 2002.
- Kruth, J.-P., Zhou, L., Van den Bergh, C., and Vanherck, P., "A Method for Squareness Error Verification on a Coordinate Measuring Machine," The International Journal of Advanced Manufacturing Technology, Vol. 21, No. 10-11, pp. 874-878, 2003. https://doi.org/10.1007/s00170-002-1408-x
- Lee, D.-M., Zhu, Z., Lee, K.-I., and Yang, S.-H., "Identification and Measurement of Geometric Errors for a Five-Axis Machine Tool with a Tilting Head Using a Double Ball-Bar," Int. J. Precis. Eng. Manuf., Vol. 12, No. 2, pp. 337-343, 2011. https://doi.org/10.1007/s12541-011-0044-5
- Lee, D.-M. and Yang, S.-H., "Mathematical Approach and General Formulation for Error Synthesis Modeling of Multi-Axis System," International Journal of Modern Physics B, Vol. 24, No. 15-16, pp. 2737-2742, 2010. https://doi.org/10.1142/S0217979210065556
Cited by
- Face- and Body-Diagonal Length Tests using a Double Ball-Bar for Squareness Errors of Machine Tools vol.19, pp.7, 2018, https://doi.org/10.1007/s12541-018-0123-y