DOI QR코드

DOI QR Code

마찰용접을 이용한 대형선박 터보챠저용 이종 로타샤프트 개발

Development of Large Rotor Shaft for Marine Turbo Charger Using Friction Welding with Dissimilar Materials

  • 문광일 (한국해양대학교 대학원 기계공학과) ;
  • 전종원 (한국해양대학교 수중운동체특화연구센터) ;
  • 정호승 ((주)페스코 연구개발팀) ;
  • 조종래 (한국해양대학교 대학원 기계공학과) ;
  • 최성규 ((주)케이에스피 기술연구소)
  • Moon, Kwang-Ill (Department of Mechanical Engineering, Korea Maritime and Ocean University) ;
  • Jeon, Jong-Won (Underwater Vehicle Research Center, Korea Maritime and Ocean University) ;
  • Jeong, Ho-Seung (Research and Development Team, Pessco) ;
  • Cho, Jong-Rae (Department of Mechanical Engineering, Korea Maritime and Ocean University) ;
  • Choi, Sung-Gyu (Research and Development Team, KSP)
  • 투고 : 2016.02.25
  • 심사 : 2016.03.16
  • 발행 : 2016.04.01

초록

Solid state joining techniques are increasingly applied in a wide range of industrial applications. Friction welding is a solid state welding technique that is used to join similar or dissimilar materials. In this study, friction welding was applied to rotor shaft composed of a disk and a shaft. The disk and shaft were manufactured by hot forging and rolling, respectively. The aim of the study was to predict the structural characteristics during hot forging and friction welding process for rotor shaft of turbo charger. The structural characteristics were determined by heat input and heat affected zone (HAZ) during a short cycle time. Thus, transient FE analysis for hot forging and friction welding was based on heat transfer. The results were used to predict structural characteristics during hot forging and friction welding processes. The prototype of rotor shaft was manufactured by the result-based process parameters.

키워드

참고문헌

  1. Jeong, H.-S., Cho, J.-R., Oh, J.-S., Kim, E.-N., Choi, S.-G., et al., "Inertia Friction Welding Process Analysis and Mechanical Properties Evaluation of Large Rotor Shaft in Marine Turbo Charger," Int. J. Precis. Eng. Manuf., Vol. 11, No. 1, pp. 83-88, 2010. https://doi.org/10.1007/s12541-010-0010-7
  2. Das, A. S. and Dutt, J. K., "Reduced Model of a Rotor-Shaft System Using Modified SEREP," Mechanics Research Communications, Vol. 35, No. 6, pp. 398-407, 2008. https://doi.org/10.1016/j.mechrescom.2008.04.004
  3. Lee, J. K., "Design and Operation Possibility of the Automatic Dynamic Balancer for the High Speed Rotating Chuck at the Friction Welding," J. Korean Soc. Precis. Eng., Vol. 18, No. 6, pp. 148-158, 2001.
  4. Polami, S. M., Reinhardt, R., Rethmeier, M., and Schmid, A., "Joint-Site Structure Friction Welding Method as a Tool for Drive Pinion Light Weighting in Heavy-Duty Trucks," Journal of Materials Processing Technology, Vol. 214, No. 9, pp. 1921-1927, 2014. https://doi.org/10.1016/j.jmatprotec.2014.03.027
  5. Hazra, M., Rao, K. S., and Reddy, G. M., "Friction Welding of a Nickel Free High Nitrogen Steel: Influence of Forge Force on Microstructure, Mechanical Properties and Pitting Corrosion Resistance," Journal of Materials Research and Technology, Vol. 3, No. 1, pp. 90-100, 2014. https://doi.org/10.1016/j.jmrt.2013.12.001
  6. Prashanth, K. G., Damodaram, R., Scudino, S., Wang, Z., Rao, K. P., et al., "Friction Welding of Al-12Si Parts Produced by Selective Laser Melting," Materials & Design, Vol. 57, pp. 632-637, 2014. https://doi.org/10.1016/j.matdes.2014.01.026
  7. Anand, K., Barik, B. K., Tamilmannan, K., and Sathiya, P., "Artificial Neural Network Modeling Studies to Predict the Friction Welding Process Parameters of Incoloy 800h Joints," Engineering Science and Technology, an International Journal, Vol. 18, No. 3, pp. 394-407, 2015. https://doi.org/10.1016/j.jestch.2015.02.001
  8. Mercan, S., Aydin, S., and Ozdemir, N., "Effect of Welding Parameters on the Fatigue Properties of Dissimilar AISI 2205-AISI 1020 Joined by Friction Welding," International Journal of Fatigue, Vol. 81, pp. 78-90, 2015. https://doi.org/10.1016/j.ijfatigue.2015.07.023
  9. Kimura, M., Fuji, A., and Shibata, S., "Joint Properties of Friction Welded Joint between Pure Magnesium and Pure Aluminium with Post-Weld Heat Treatment," Materials & Design, Vol. 85, pp. 169-179, 2015. https://doi.org/10.1016/j.matdes.2015.06.175
  10. Ma, H., Qin, G., Geng, P., Li, F., Fu, B., et al., "Microstructure Characterization and Properties of Carbon Steel to Stainless Steel Dissimilar Metal Joint Made by Friction Welding," Materials & Design, Vol. 86, pp. 587-597, 2015. https://doi.org/10.1016/j.matdes.2015.07.068
  11. Ajith, P., Barik, B. K., Sathiya, P., and Aravindan, S., "Multiobjective Optimization of Friction Welding of UNS S32205 Duplex Stainless Steel," Defence Technology, Vol. 11, No. 2, pp. 157-165, 2015. https://doi.org/10.1016/j.dt.2015.03.001
  12. Schmicker, D., Persson, P.-O., and Strackeljan, J., "Implicit Geometry Meshing for the Simulation of Rotary Friction Welding," Journal of Computational Physics, Vol. 270, pp. 478-489, 2014. https://doi.org/10.1016/j.jcp.2014.04.014
  13. Iracheta, O., Bennett, C., and Sun, W., "A Sensitivity Study of Parameters Affecting Residual Stress Predictions in Finite Element Modelling of the Inertia Friction Welding Process," International Journal of Solids and Structures, Vol. 71, pp. 180-193, 2015. https://doi.org/10.1016/j.ijsolstr.2015.06.018
  14. Bennett, C., "Finite Element Modelling of the Inertia Friction Welding of a CrMoV Alloy Steel Including the Effects of Solid-State Phase Transformations," Journal of Manufacturing Processes, Vol. 18, pp. 84-91, 2015. https://doi.org/10.1016/j.jmapro.2015.01.003
  15. Yang, X., Li, W., Li, J., Xiao, B., Ma, T., et al., "Finite Element Modeling of the Linear Friction Welding of GH4169 Superalloy," Materials & Design, Vol. 87, pp. 215-230, 2015. https://doi.org/10.1016/j.matdes.2015.08.036