Acknowledgement
Supported by : 한국연구재단
References
- StandardAero Components homepage,http://standardaerocomponents.com/.
- Han, J. H., Pratt, M. and Regli, W. C., 2000, "Manufacturing Feature Recognition from Solid Models," IEEE Trans. Rob. Autom., Vol. 16, No. 6, pp. 782-796. https://doi.org/10.1109/70.897789
- Shah, J. J., Anderson, D., Kim, Y. S. and Joshi, S., 2001, "A Discourse on Geometric Feature Recognition from CAD Models," J. Comput. Inf. Sci. Eng., Vol. 1, No. 1, pp.41-51. https://doi.org/10.1115/1.1345522
- Kim, B. C. and Song, I., 2015, "Automatic Generation of CAM Model for Machining Holes for Jet Engine Compressor Case Based on Feature Recognition," Trans. Korean Soc. Mech. Eng. A 39, No. 3, pp.337-345. https://doi.org/10.3795/KSME-A.2015.39.3.337
- Joshi, S. and Chang, T. C., 1988, "Graph Based Heuristics for Recognition of Machined Features from a 3-D Solid Model," Comput. Aided Des., Vol. 20, No. 2, pp. 58-66. https://doi.org/10.1016/0010-4485(88)90050-4
- Chuang, S. H. and Henderson, M. R., 1990, "Three-Dimensional Shape Pattern Recognition Using Vertex Classification and the Vertex-Edge Graph," Comput. Aided Des., Vol. 22, No. 6, pp. 377-387. https://doi.org/10.1016/0010-4485(90)90088-T
- Gavankar, P. and Henderson, M. R., 1990, "Graph-Based Extraction of Protrusions and Depressions from Boundary Representations," Comput. Aided Des., Vol. 22, No. 7, pp. 442-450. https://doi.org/10.1016/0010-4485(90)90109-P
- Gao, S. and Shah, J. 1998, "Automatic Recognition of Interacting Machining Features Based on Minimal Condition Subgraph," Comput. Aided Des., Vol. 30, No. 9, pp. 727-739. https://doi.org/10.1016/S0010-4485(98)00033-5
- Tang, K. and Woo, T., 1991, "Algorithmic Aspects of Alternating Sum of Volumes. Part 1: Data Structure and Difference Operation," Comput. Aided Des., Vol. 23, No. 5, pp. 357-366. https://doi.org/10.1016/0010-4485(91)90029-V
- Kim, Y. S. and Wilde, D. J., 1992, "A Convergent Convex Decomposition of Polyhedral Objects," J Mech. Des. N. Y., Vol. 114, No. 3, pp. 468-477. https://doi.org/10.1115/1.2926575
- Sakurai, H., 1995, "Volume Decomposition and Feature Recognition, Part I: Polyhedral Objects," Comput. Aided Des., Vol. 27, No. 11, pp. 833-843. https://doi.org/10.1016/0010-4485(95)00007-0
- Sakurai, H. and Dave, P., 1996, "Volume Decomposition and Feature Recognition, Part II: Curved Objects," Comput. Aided Des., Vol. 28, No. 6-7, pp. 519-537. https://doi.org/10.1016/0010-4485(95)00067-4
- Woo, Y., 2003, "Fast Cell-Based Decomposition and Applications to Solid Modeling," Comput. Aided Des., Vol. 35, No. 11, pp. 969-977. https://doi.org/10.1016/S0010-4485(02)00144-6
- Kim, B. C. and Mun, D., 2014, "Feature-Based Simplification of Boundary Representation Models Using Sequential Iterative Volume Decomposition," Comput. Graph., Vol. 38, pp. 97-107. https://doi.org/10.1016/j.cag.2013.10.031
- Kim, B. C. and Mun, D., 2014, "Stepwise Volume Decomposition for the Modification of B-Rep Models," Int. J. Adv. Manuf. Tech., Vol. 75, No. 9-12, pp. 1393-1403. https://doi.org/10.1007/s00170-014-6210-z
- Vadenbrande, J. H. and Requicha, A. A. G., 1993, "Spatial Reasoning for the Automatic Recognition of Machinable Features in Solid Models," IEEE Trans. Pattern Anal. Mach. Intell., Vol. 15, No. 12, pp. 1269-1285. https://doi.org/10.1109/34.250845
- Regli, W. C., Gupta, S. K. and Nau, D. S., 1995, "Extracting Alternative Machining Features: An Algorithmic Approach," Res. Eng. Des., Vol. 7, No. 3, pp. 173-192. https://doi.org/10.1007/BF01638098
- Iyer, N., Jayanti, S., Lou, K., Kalyanaraman, Y. and Ramani, K., 2005, "Three-Dimensional Shape Searching: State-of-the-Art Review and Future Trends," Comput. Aided Des., Vol. 37, No. 5, pp. 509-530. https://doi.org/10.1016/j.cad.2004.07.002
- Elad, M., Tal, A. and Ar, S., 2001, "Content Based Retrieval of VRML Objects-An Iterative and Interactive Approach," In Proc. of Eurographics Multimedia Workshop 2001, pp. 97-108.
- Rea, H. J., Corney, J. R., Clark, D. E. R., Pritchard, J., Breaks, M. L. and MacLeod, R. A., 2002, "Part-Sourcing in a Global Market," Concurrent Eng-Res. A., Vol. 10, No. 4, pp. 325-333. https://doi.org/10.1177/106329302129140214
- Vranic, D., Saupe, D. and Richter, J., 2001, "Tools for 3D Object Retrieval: Karhunen-Loeve Transform and Spherical Harmonics," In Proc. of the IEEE Workshop on Multimedia Signal Processing 2001, pp. 293-298.
- Saupe, D. and Vranic, D., 2001, "3D Model Retrieval with Spherical Harmonics and Moments," In Proc. of the DAGM 2001, pp. 392-397.
- Tanaka, K., Sano, M., Mukawa, N. and Kaneko, H., 1993, "3D Object Representation Using Spherical Harmonic Functions," In Proc. of the IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 1873-1880.
- Kazhdan, M., Funkhouser, T. and Rusinkiewicz, S., 2003, "Rotation Invariant Spherical Harmonic Representation of 3D Shape Descriptors," In Proc. of the ACM/Eurographics Symposium on Geometry Processing 2003, pp. 167-175.
- OpenCascade homepage, http://www.opencascade.org/.
- GE Aviation homepage, http://www.geaviation.com/commercial/engines/genx/.