References
- Ahn, D. G. and Yang, D. Y., 2005, "Principle of Rapid Prototyping and Its Trends," J. KSPE, Vol. 22, No. 10, pp. 7-16.
- Campbell, I., Bourell, D. and Gibson, I., 2012, "Additive Manufacturing: Rapid Prototyping Comes of Age," Rapid Prototyping J., Vol. 18, No. 4, pp. 255-258. https://doi.org/10.1108/13552541211231563
- Park, S. H., Park, J. H., Lee, H. J. and Lee, N. K., 2014, "Current Status of Biomedical Applications Using 3D Printing Technology," J. KSPE, Vol. 31, No. 12, pp. 1067-1076. https://doi.org/10.7736/KSPE.2014.31.12.1067
- Park, J. H., Jang, J. and Cho, D. W., 2014, "Three-Dimensional Printed 3D Structure for Tissue Engineering," Trans. Korean Soc. Mech. Eng. B, Vol. 38, No. 10, pp. 817-829.
- Vatani, M., Lu, Y., Lee, K. S., Kim, H. C. and Choi, J. W., 2013, "Direct-Write Stretchable Sensors Using Single-Walled Carbon Nanotube/Polymer Matrix," J. Electro. Packag., Vol. 135, No. 1, 011009. https://doi.org/10.1115/1.4023293
- Oh, S. T., Jang, S. H., Lee, I. H., Kim, H. C. and Cho, H. Y., 2014, "3-Dimensional Circuit Device Fabrication for Improved Design Freedom Based on the Additive Manufacturing," J. KSPE, Vol. 31, No. 12, pp. 1077-1083. https://doi.org/10.7736/KSPE.2014.31.12.1077
- Ahn, D. G., 2011, "Applications of Laser Assisted Metal Rapid Tooling Process to Manufacture of Molding & Forming Tools-State of the Art," Int. J. Precis. Eng. Manuf., Vol. 12, No. 5, pp. 925-938. https://doi.org/10.1007/s12541-011-0125-5
- Kim, J. H. and Jung, E. C., 2015, "Modeling Process Development for Customized Woman Midsole Design Based-on 3d Printing Technology," J. Kor. Soc. Design Forum, Vol. 46, pp. 267-277.
- Pilipovic, A., Raos, P. and Sercer, M., 2009, "Experi-Mental Analysis of Properties of Materials for Rapid Prototyping," Int. J. Adv. Manuf. Technol., Vol. 40, pp. 105-115. https://doi.org/10.1007/s00170-007-1310-7
- Ahn, S. H., Montero, M., Odell, D., Roundy, S. and Wright, P. K., 2002, "Anisotropic Material Properties of Fused Deposition Modeling ABS," Rapid Prototyping J., Vol. 8, No. 4, 248-257. https://doi.org/10.1108/13552540210441166
- Caulfield, B., McHugh, P. E. and Lohfeld, S., 2007, "Dependence of Mechanical Properties of Polyamide Components on Build Parameters in the SLS Process," J. Mater. Process. Technol., Vol. 182, No. 1, pp. 477-488. https://doi.org/10.1016/j.jmatprotec.2006.09.007
- Quintana, R., Choi, J. W., Puebla, K. and Wicker, R., 2010, "Effects of Build Orientation on Tensile Strength for Stereolithography-Manufactured ASTM D-638 Type I Specimens," Int. J. Adv. Manuf. Technol., Vol. 46, No. 1-4, pp. 201-215. https://doi.org/10.1007/s00170-009-2066-z
- Park, K., Kim, Y. S. and Park, D. Y., 2008, "Investigation into Directional Properties of Rapid Prototypes and Its Application to FE Analysis Considering Anisotropy," J of KSPE, Vol. 25, No. 11, pp.126-133.
- Lee, J. E., Lim, Y. E., Kim, S. Y., Yu, H. R., Jin, M. H., Kong, W. J., Bae, H. Y. and Park, K., 2014, "Development of Personalized Glasses Using 3D Printing with Evaluation of Assembly Characteristics," Proc. KSME Fall Conf., Gwangju, Korea.