DOI QR코드

DOI QR Code

Simulation study on CFRP strengthened reinforced concrete beam under four-point bending

  • Zhang, Dongliang (College of Architecture and Environment, Sichuan University) ;
  • Wang, Qingyuan (College of Architecture and Environment, Sichuan University) ;
  • Dong, Jiangfeng (College of Architecture and Environment, Sichuan University)
  • Received : 2014.07.26
  • Accepted : 2016.02.19
  • Published : 2016.03.25

Abstract

This paper presents numerical modeling of the structural behavior of CFRP (carbon fiber reinforced polymer) strengthened RC (reinforced concrete) beams under four-point bending. Simulation of debonding at the CFRP-concrete interface was focused, as it is the main failure mode of CFRP strengthened RC beams. Here, cohesive layer was employed to model the onset of debonding, which further helps to describe the post debonding behavior of the CFRP strengthened RC beam. In addition, the XFEM approach was applied to investigate the effects of crack localization on strain field on CFRP sheet and rebar. The strains obtained from the XFEM correlate better to the test results than that from CDP (concrete damaged plasticity) model. However, there is a large discrepancy between the experimental and simulated loaddisplacement relationships, which is due to the simplification of concrete constitutive law.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Abaqus Analysis User's Manual 6.11.
  2. Biolzi, L., Ghittoni, C., Fedele, R. and Rosati, G. (2013), "Experimental and theoretical issues in FRPconcrete bonding", Constr. Build. Mater., 41, 182-190. https://doi.org/10.1016/j.conbuildmat.2012.11.082
  3. Burgers, R. (2006), "Non-linear FEM modelling of steel fibre reinforced concrete", Report, Delft University of Technology, Delft.
  4. Carlos, A., Maria, C. and Lopez, M. (2006), "Sensitivity analysis of reinforced concrete beams strengthened with FRP laminates", Cement Concrete Compos., 28(1), 102-114. https://doi.org/10.1016/j.cemconcomp.2005.07.005
  5. Chaudhari, S.V. and Chakrabarti, M.A. (2012), "Modeling of concrete for nonlinear analysis using finite element code ABAQUS", Int. J. Comput. Appl., 44(7), 14-18. https://doi.org/10.5120/6274-8437
  6. Chen, J.F. and Tao, Y. (2011), Finite element modeling of FRP-to-concrete bond behavior using the concrete damage plasticity theory combined with a plastic degradation model, Springre-Verlag, 45.
  7. Design code (2010), Code for design of concrete structures, China.
  8. Diehl, T. (2005), "Modeling sruface-bonded structures with ABAQUS cohesive elements: beam-type solutions", ABAQUS Users' Conference.
  9. Dong, J., Wang, Q. and Guan, Z. (2013), "Structural behavior of RC beams with external flexural and flexural-shear strengthening by FRP sheets", Compos. Part B, 44(1), 604-612. https://doi.org/10.1016/j.compositesb.2012.02.018
  10. Fan, J., Guan, Z.W. and Cantwell, W.J. (2011), "Numerical modelling of perforation failure in fibre metal laminates subjected to low velocity impact loading", Compos. Struct., 93(9), 2430-2436. https://doi.org/10.1016/j.compstruct.2011.04.008
  11. Foraboschi, P. (2014), "Predictive multiscale model of delayed debonding for concrete members with adhesively bonded external reinforcement", Compos. Mech., Comput., Appl., 3(4), 307-329.
  12. Golewski, G.L., Golewski, P. and Sadowski, T. (2012), "Numerical modelling crack propagation under Mode II fracture in plain concrete containing siliceous fly-ash additive using XFEM method", Comput. Mater. Sci., 62, 75-78. https://doi.org/10.1016/j.commatsci.2012.05.009
  13. Jiang, J., Wu, Y. and Zhao, X. (2011), "Application of drucker-prager plasticity model for stress-strain modeling of FRP confined concrete columns", Procedia Eng., 14, 678-694.
  14. Kmiecik, P. and Kaminski, M. (2011), "Modeling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration", Arch. Civil Mech. Eng., 6(3), 623-636.
  15. Li, W., Li, Q. and Jiang, W. (2012), "Parameter study on composite frames consisting of steel beams and reinforced concrete columns", J. Constr. Steel Res., 77, 145-162. https://doi.org/10.1016/j.jcsr.2012.04.007
  16. Lu, X.Z., Jiang, J.J., Teng, J.G. and Ye, L.P. (2006), "Finite element simulation of debonding in FRP-toconcrete bonded joints", Constr. Build. Mater., 20(6), 412-424. https://doi.org/10.1016/j.conbuildmat.2005.01.033
  17. Mercan, B., Schultz, A.E. and Stolarski, H.K. (2010), "Finite element modeling of prestressed concrete spandrel beams", Eng. Struct., 32(9), 2804-2813. https://doi.org/10.1016/j.engstruct.2010.04.049
  18. Ortiz, M. (1985), "A constitutive theory for the inelastic behavior of concrete", Mech. Mater., 4(1), 67-93. https://doi.org/10.1016/0167-6636(85)90007-9
  19. Ozbakkaloglu, T., Lim, J.C. and Vincent, T. (2013), "FRP-confined concrete in circular sections: Review and assessment of stress-strain models", Eng. Struct., 49, 1068-1088. https://doi.org/10.1016/j.engstruct.2012.06.010
  20. Qiao, P. and Chen,Y. (2008), "Cohesive fracture simulation and failure modes of FRP-concrete bonded interfaces", Theor. Appl. Fract. Mech., 49(2), 213-225. https://doi.org/10.1016/j.tafmec.2007.11.005
  21. Roth, S.N., Leger, P. and Soulaimani, A. (2011), "XFEM using a non linear fracture mechanics approach for concrete crack propagation in dam safety assessment", Proceedings of the 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures.
  22. Sinaei, H., Shariati, M., Abna, A.H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behavior using finite element analysis by ABAQUS", Sci. Res. Essay., 7(21), 2002-2009.
  23. Sokolov, A. (2010), "Tension stiffening model for reinforced concrete beams", Ph.D. Dissertation, Vilnius Gediminas Technical University, Vilnius.
  24. Sukumar, N. and Prevost, J.H. (2003), "Modeling quasi-static crack growth with the extended finite element method Part I: Computer implementation", Int. J. Solid. Struct., 40(26), 7513-7537. https://doi.org/10.1016/j.ijsolstr.2003.08.002
  25. Wang, Z. (2007), "The fracture and bond performances of fiber reinforced and rehabilitated concrete", Ph.D. Dissertation, Zhengzhou University, Zhengzhou.
  26. Yu, T., Teng, J.G., Wong, Y.L. and Dong, S.L. (2010), "Finite element modeling of confined concrete-I: Drucker-Prager type plasticity model", Eng. Struct., 32(3), 665-679. https://doi.org/10.1016/j.engstruct.2009.11.014
  27. Yu, T., Teng, J.G., Wong, Y.L. and Dong, S.L. (2010), "Finite element modeling of confined concrete-II: Plastic-damage model", Eng. Struct., 32(3), 680-691. https://doi.org/10.1016/j.engstruct.2009.11.013
  28. Zhang, S., Wang, G. and Yu, X. (2013), "Seismic cracking analysis of concrete gravity dams with initial cracks using the extended finite element method", Eng. Struct., 56, 528-543. https://doi.org/10.1016/j.engstruct.2013.05.037
  29. Zheng, Y., Robinson, D., Taylor, S. and Cleland, D. (2009), "Finite element investigation of the structural behaviour of deck slabs in composite bridges", Eng. Struct., 31(8), 1762-1776. https://doi.org/10.1016/j.engstruct.2009.02.047
  30. Zhou, S. (2007), "The numerical simulation and meso-mechanics analysis of the concrete damage process in the static and dynamic loads", Ph.D. Dissertation, Xi'an University of Technology, Xi'an.

Cited by

  1. Buckling of concrete columns retrofitted with Nano-Fiber Reinforced Polymer (NFRP) vol.18, pp.5, 2016, https://doi.org/10.12989/cac.2016.18.5.1053
  2. Ductility of Concrete Beams Reinforced with Both Fiber-Reinforced Polymer and Steel Tension Bars vol.16, pp.11, 2018, https://doi.org/10.3151/jact.16.531
  3. Mechanical performances of concrete beams with hybrid usage of steel and FRP tension reinforcement vol.20, pp.4, 2016, https://doi.org/10.12989/cac.2017.20.4.391
  4. Side-NSM composite technique for flexural strengthening of RC beams vol.20, pp.4, 2016, https://doi.org/10.12989/cac.2017.20.4.439
  5. Evaluation of constitutive relations for concrete modeling based on an incremental theory of elastic strain-hardening plasticity vol.22, pp.2, 2016, https://doi.org/10.12989/cac.2018.22.2.227
  6. Numerical study on fracture behavior of CFRP-strengthened self-compacting concrete beams vol.134, pp.7, 2016, https://doi.org/10.1140/epjp/i2019-12714-y
  7. Experimental verification and simulation of fracture behavior of CFRP reinforced self-consolidating concrete beams with initial notch vol.2, pp.3, 2020, https://doi.org/10.1007/s42452-020-1994-y
  8. Performance Evaluation of CFRP Strengthened Corrosion-Proof Columns vol.2021, pp.None, 2016, https://doi.org/10.1155/2021/8390088