DOI QR코드

DOI QR Code

Developing Technology Influence Matrix to Support Decision-making for Long-life Housing Planning - Focused on Exclusive Housing Unit of Long-life Housing -

  • Song, Sanghoon (Land & Housing Institute, Korea Land and Housing Corporation) ;
  • Bang, Jong-Dae (Land & Housing Institute, Korea Land and Housing Corporation) ;
  • Park, Ji-Young (Land & Housing Institute, Korea Land and Housing Corporation)
  • Received : 2016.01.14
  • Accepted : 2016.02.05
  • Published : 2016.02.29

Abstract

Purpose: Long-life housing causes unavoidable cost increase while providing higher durability, flexibility, and repair easiness compare to those of normal apartment. The effectiveness should be evaluated considering the level of passing mandatory Long-life housing Certification System when supplying specific size of apartment complex. Thus, it is essential to identify the estimated costs and the obtainable grade by applying the optional element technologies selectively during the design phase. This study aimed to suggest the technology influence matrix(TIM) to support decision-making of element technologies in planning stage of long-life housing. Method: The technology influence matrix was established based on the property information about applicable element technologies for long-life housing such as construction methods, interface types, cost data, and certification-related characteristics. The usefulness of TIM was verified through case study, in which TIM was applied to the exclusive housing unit and the influences from four areas of quantity, cost, certification, and schedule were identified and calculated. Result: TIMs covering four areas representing the essential planning factors were developed, and are expected to contribute to sound decision-making in planning long-life housing.

Keywords

References

  1. 국토교통부, 장수명주택 건설․인증기준(국토교통부고시 제2014-847호), 국토교통부, 2014 // (Ministry of Land, Infrastructure and Transport (MOLIT), "The Standard for Construction and Certification of Long-life Housing", MOLIT, 2014)
  2. 권대근 등, "사례 분석을 통한 국내 장수명 주택 활성화 방안에 관한 연구: 저해요인 분석 중심으로", 대한건축학회연합논문집, 16권4호, 2014 // (Kwon, Dae-Keun, et al., "A Study on the Plans for Encouraging Domestic Long-Life Housing through Case Analysis - Concentrated on an Analysis of Impediment Factors", Journal of the Regional Association of Architectural Institute of Korea, Vol.16, No.4, 2014)
  3. 김수암, 박진아, "국내 장수명 공동주택의 흐름과 과제", 한국주거학회 2014 추계학술발표대회 논문집 제26권 제2호, 2014 // (Kim, Soo-Am, Park, Jin-A, "Flow and Challenges of long-life Housing in Korea", Proceedings of The Korean Housing Association 2014 Fall-Conference, Vol.26, No.2, 2014)
  4. 김홍용, 장수명 공동주택의 내장부품 접합부 구성체계에 관한 연구, 연세대학교 박사학위논문, 2007 // (Kim, Hong-Yong, A Study on the Categorization System of the Interface among Infill Components of the Long Life Housing", Doctoral Dissertation, Yonsei University)
  5. 이재현, 김용로, "건식벽체 시스템의 현황과 발전방향", 대림기술정보, 2014 // (Lee, Jae-Hyun, Kim, Yong-Ro, "Status and Development Direction of Drywall System", Daelim Technical Review, 2014)
  6. 이정석 등, "차세대 장수명 공동주택의 가변성능향상을 위한 건축요소 기술 우선순위결정에 관한 연구", 한국건설관리학회논문집, 제10권 제2호, 2009 // (Lee, Jeong-Seok, Cho, Gun-Hee, Sohn, Jeong-Rak, Kim, Jae-Jun, "Selection on the Order of Priority Factor of Construction Key Technology for Improving the Flexibility for a Long Life Apartment Housing at the Next Generation", Korea Journal of Construction Engineering and Management , Vol.10, No.2, 2009)
  7. 이지희 등, "생애주기비용 분석을 통한 벽식 구조 공동주택과 장수명 공동주택의 경제성 비교 연구", 한국건설관리학회 논문집, 제15권 제6호, 2014 // (Lee, Jeehee, Kim, Kyuree, Son, JeongWook, Yi, June-Seong, "A Comparative Study on the Life Cycle Cost of Wall Type Apartment and Beam-Column Structural Apartment", Korea Journal of Construction Engineering and Management , Vol.15, No.6, 2014)
  8. 이학주, "설문조사를 통한 장수명주택의 경량벽체 시공성 사후평가", 2014년 춘계학술발표대회 논문집, 제14권 제1호, 2014 // (Lee, Hak-Ju, "Post Evaluation on the Constructibility of the Lightweight Wall in Long Life Housing through Interview Survey", Proceedings of The Korea Institute of Building Construction 2014 Spring-Conference, Vol.14, No.1, 2014)
  9. 이학주, 김형근, "장수명주택을 위한 경량벽체 시스템 연구: 성능기준 및 가이드라인을 중심으로", SH공사 도시연구소, 2010 // (Lee, Hak-Ju, Kim, Hyung-Keun, "A Study on Light-weight Wall System for Longlife Housing", SHURI, 2010)
  10. 임석호, 이창재, "비용절감형 장수명 주택의 인필시스템을 위한 설계표준화 개발 연구", 한국주거학회 2014 추계학술발표대회 논문집 제26권 제2호, 2014 // (Lim, Seok-Ho, Lee, Chang-Jae, "A study of developing the design standards for infill systems of Cost effective long life housing", Proceedings of The Korean Housing Association 2014 Fall-Conference, Vol.26, No.2, 2014)
  11. 정우진, 임석호, "장수명 공동주택의 리모델링을 위한 구성재 접합부 실태조사 연구: 주호 내부 구성재의 시공 실태조사를 중심으로", 대한건축학회논문집, 제22권 5호, 2006 // (Jung, Woo-Jin, Lim, Seok-Ho, "A Study on the Component Joint of Long Life Span Multifamily Housing for Remodeling", Journal of the Architectural Institute of Korea, Vol.22, No.5, 2006)
  12. 홍성욱 등, "장수명 공동주택 시공지침 개발을 위한 Infill-system 공기예측에 관한 연구", 대한건축학회연합논문집, 제11권 4호, 2009 // (Hong, Sung-Wook, et al., "A Study on Infill-system Construction Planning and Scheduling Prediction for Long Life Housing Construction Guideline Development", Journal of the Regional Association of Architectural Institute of Korea, Vol.11, No.4, 2009)
  13. 황은경, 박수로, 김수암, "인필 인증제도 도입을 위한 기초 연구", 한국주거학회 2014 추계학술발표대회 논문집 제26권 제2호, 2014 // (Hwang, Eun-Kyoung, Park, Su-Ro, Kim, Soo-Am, "The Basic Study of Introduction for the Certification System of Infill", Proceedings of The Korean Housing Association 2014 Fall-Conference, Vol.26, No.2, 2014)