참고문헌
- Chyu, M.K., Metzger, D.E. and Hwan, C. L., "Heat Transfer in Shrouded Rectangular Cavities", Journal of Thermophysics, Vol. 1, No.3, July 1987, pp. 247-252. https://doi.org/10.2514/3.35
- Azad, G. S., Han, J. C., Teng, S., and Boyle, R. J., "Heat transfer and pressure distributions on a gas turbine blade tip", Journal of Turbomachinery, Vol.122, No.4, 2000, pp. 717-724. https://doi.org/10.1115/1.1308567
- Kim, Y. W., and Metzger, D. E., "Heat transfer and effectiveness on film cooled turbine blade tip models", Journal of Turbomachinery, Vol.117, No.1, 1995, pp. 12-21. https://doi.org/10.1115/1.2835630
- Nirmalan, N. V., Bailey, J. C., and Braaten, M. E., "Experimental and Computational Investigation of Heat Transfer Effectiveness and Pressure Distribution of a Shrouded Blade Tip Section", ASME Turbo Expo 2004: Power for Land, Sea, and Air, 2004, pp. 317-328.
- Ahn, J., Mhetras, S., and Han, J. C., "Film-cooling effectiveness on a gas turbine blade tip using pressure-sensitive paint", Journal of Heat Transfer, Vol.127, No.5, 2005, pp.521-530. https://doi.org/10.1115/1.1909208
- Kwak, J. S. and Han, J. C., "Heat Transfer Coefficient and Film-Cooling Effectiveness on the Squealer Tip of a Gas Turbine Blade", ASME Turbo Expo 2002: Power for Land, Sea, and Air, Vol.308, 2002, pp.6355-6367.
- Zhou, C., and Hodson, H., "Squealer geometry effects on aerothermal performance of tip-leakage flow of cavity tips", Journal of Propulsion and Power, Vol.28, No.3, 2012, pp. 556-567. https://doi.org/10.2514/1.B34254
- Yang, D., and Feng, Z., "Tip leakage flow and heat transfer predictions for turbine blades", In ASME Turbo Expo 2007: Power for Land, Sea, and Air, 2007, pp. 589-596. American Society of Mechanical Engineers.
- Park, J. S., Dong, H. L., Cho, H. H., Rhee, D. H., and Kang, S. H., "Heat Transfer and Effectiveness on the Film Cooled Tip and Inner Rim Surfaces of a Turbine Blade", ASME Turbo Expo 2010: Power for Land, Sea, and Air, 2010, pp.1751-1761.
- Zhu, D., and Miller, R. A., "Thermal conductivity and elastic modulus evolution of thermal barrier coatings under high heat flux conditions", Journal of Thermal Spray Technology, Vol. 9, No. 2, 2000, pp. 175-180. https://doi.org/10.1361/105996300770349890
- Arisi, A., Xue, S., Ng, W. F., Moon, H. K., and Zhang, L., "Numerical Investigation of Aerothermal Characteristics of the Blade Tip and Near-Tip Regions of a Transonic Turbine Blade", Journal of Turbomachinery, Vol. 137, No.9, 2015, pp. 091002. https://doi.org/10.1115/1.4029713
- Tong, F., Gou, W., Li, L., Liu, Q., Yue, Z., and Xie, G., "Investigation on heat transfer of a rotor blade tip with various film cooling holes arrangements and groove depths", Advances in Mechanical Engineering, Vol.7, No.2, 2015, 1687814014568499. https://doi.org/10.1177/1687814014568499
- Smits, A. J. and Dussauge, J. P., "Turbulent shear layers in supersonic flow", Second Ed. Springer, New York, USA.
- Poling, B. E., Prausnitz, J. M. and O'Connell, J. P., 2001, "The properties of gases and liquids", MaGraw-Hill, New York, USA, 2006.
- Krishnababu, S. K., Newton, P. J., Dawes, W. N., Lock, G. D., Hodson, H. P., Hannis, J., and Whitney, C., "Aerothermal Investigations of Tip Leakage Flow in Axial Flow Turbines-Part I: Effect of Tip Geometry and Tip Clearance Gap", Journal of Turbomachinery, Vol. 131, No. 1, 2009, pp. 011006. https://doi.org/10.1115/1.2950068
- Han, J. C., Dutta, S., and Ekkad, S., "Gas turbine heat transfer and cooling technology", CRC Press, 2012, pp. 94.
- Kim, J., Bak, J., Kang, Y. S., and Cho, J. "Conjugate heat transfer analysis for high pressure cooled turbine vane in aircraft gas turbine", The KSFM Journal of Fluid Machinery, Vol. 18, No. 2, pp. 60-66.
- Rhee, D. H., Kang, Y. S., Cha, B. J., Kang, J. S., Lee, S. and Yee, K., "Film cooling performance improvement with optimized hole arrangements on pressure side surface of nozzle guide vane - Part II: experimental validation", ASME Turbo Expo, Seoul, South Korea, 2016, GT2016-57978.
- Ameri, A. A., Steinthorsson, E., and Rigby, D. L., "Effect of squealer tip on rotor heat transfer and efficiency", Journal of Turbomachinery, Vol. 120, No.4, 1998, pp. 753-759. https://doi.org/10.1115/1.2841786