참고문헌
-
Ahn T H, Lee S B, Park K T, Oh K H, and Han H N (2014) Strain-induced
${\epsilon}$ -martensite transformation during nanoindentation of high-nitrogen steel. Mat. Sci. Eng. A 598, 56-61. https://doi.org/10.1016/j.msea.2014.01.030 - Allain S, Chateau J P, and Bouaziz O (2004) A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel. Mat. Sci. Eng. A 387, 143-147.
- Barbier D, Gey N, Allain S, Bozzolo N, and Humbert M (2009) Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions. Mat. Sci. Eng. A 500, 196-206. https://doi.org/10.1016/j.msea.2008.09.031
- Frommeyer G, Brux U, and Neumann P (2003) Supra-ductile and highstrength Manganese-TRIP/TWIP steels for high energy absorption purposes. ISIJ Int. 43, 438-446. https://doi.org/10.2355/isijinternational.43.438
- Godet S, Jiang L, Luo A A, and Jonas J J (2006) Use of Schmid factors to select extension twin variants in extruded magnesium alloy tubes. Scripta Mater. 55, 1055-1058. https://doi.org/10.1016/j.scriptamat.2006.07.059
- Han J H, Kim D I, Jee K K, and Oh K H (2004) Evolution of crystallographic orientations in an aluminum single crystal during tensile deformation. Mat. Sci. Eng. A 387, 60-63.
- Hong C S, Tao N R, Lu K, and Huang X (2009) Grain orientation dependence of deformation twinning in pure Cu subjected to dynamic plastic deformation. Scripta Mater. 61, 289-292. https://doi.org/10.1016/j.scriptamat.2009.04.006
- Hua D, Zheng-You T, Wei L I, Mei W, and Dan S (2006) Microstructures and mechanical properties of Fe-Mn-(Al, Si) TRIP/TWIP steels. J. Iron Steel Res. Int. 13, 66-70. https://doi.org/10.1016/S1006-706X(06)60113-1
- Hull D and Bacon D J (2001) Introduction to Dislocation (Butterworth-Heinemann, London).
- Idrissi H, Ryelandt L, Veron M, Schryvers D, and Jacques P J (2009) Is there a relationship between the stacking fault character and the activated mode of plasticity of Fe-Mn-based austenitic steels? Scripta Mater. 60, 941-944. https://doi.org/10.1016/j.scriptamat.2009.01.040
- Karaman I, Sehitoglu H, Gall K, Chumlyakov Y I, and Maier H J (2000) Deformation of single crystal Hadfield steel by twinning and slip. Acta Mater. 48, 1345-1359. https://doi.org/10.1016/S1359-6454(99)00383-3
- Lee S H, Kang J Y, Han H N, Oh K H, Lee H C, Suh D W, and Kim S J (2005) Variant selection in mechanically-induced martensitic transformation of metastable austenitic steel. ISIJ Int. 45, 1217-1219. https://doi.org/10.2355/isijinternational.45.1217
- Perez-Prado M T and Doncel G G (2006) Lattice rotation during severe local shear in a fully hardened Al-4% Cu-0.1% Fe single crystal alloy. Scripta Mater. 54, 915-919. https://doi.org/10.1016/j.scriptamat.2005.10.071
- Scheriau S and Pippan R (2008) Influence of grain size on orientation changes during plastic deformation. Mat. Sci. Eng. A 493, 48-52. https://doi.org/10.1016/j.msea.2007.08.092
- Ueji R, Tsuchida N, Terada D, Tsuji N, Tanaka Y, Takemura A, and Kunishige K (2008) Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure. Scripta Mater. 59, 963-966. https://doi.org/10.1016/j.scriptamat.2008.06.050
- Vercammen S, Blanpain B, De Cooman B C, and Wollants P (2004) Cold rolling behaviour of an austenitic Fe-30Mn-3Al-3Si TWIP-steel: the importance of deformation twinning. Acta Mater. 52, 2005-2012. https://doi.org/10.1016/j.actamat.2003.12.040
- Yang P, Xie Q, Meng L, Ding H, and Tang Z (2006) Dependence of deformation twinning on grain orientation in a high manganese steel. Scripta Mater. 55, 629-631. https://doi.org/10.1016/j.scriptamat.2006.06.004