DOI QR코드

DOI QR Code

Performance Analysis of Absorbent for Post-combustion CO2 Capture by Regeneration

연소 후 CO2 포집을 위한 흡수제의 재생반응에 의한 성능 해석

  • Received : 2015.12.23
  • Accepted : 2016.02.28
  • Published : 2016.02.29

Abstract

Performance of absorbent for post-combustion $CO_2$ capture was measured and discussed. Fully saturated fresh absorbent (P2-15F) and absorbents sampled from absorption and regeneration reactor of continuous $CO_2$ capture process, P2-15A, P2-15R, respectively, were used as representative absorbents. Small scale fluidized bed reactor (0.05 m I.D., 0.8 m high) which can measure exhaust gas concentration and weight change simultaneously was used to analyze regeneration characteristics for those absorbents. Exhausted moles of $CO_2$ and $H_2O$ were measured with increasing temperature. $H_2O/CO$ ratio and working capacity were determined and discussed to confirm reason of reactivity decay after continuous operation. Moreover, possibility of side reaction was checked based on the $H_2O/CO_2$ mole ratio. Finally, suitable regeneration temperature range was confirmed based on the trend of working capacity with temperature.

Keywords

References

  1. C. K. Yi, "Advances of Post-combustion Carbon Capture Technology by Dry Sorbent", Korean Chem. Eng. Res. Vol. 48, No. 2, 2015, pp. 104-106.
  2. C. K. Yi, "Advances of Carbon Capture Technology", Korean Industrial Chemistry News, Vol. 12, No. 1, 2009, pp. 30-42.
  3. C. K. Yi, S. H. Jo, Y. W. Seo, J. B. Lee, C. K. Ryu, "Continuous operation of the potassium-based dry sorbent $CO_2$ capture process with two fluidized-bed reactors", Int. J. of Greenhouse Gas Control., Vol. 1, 2007, pp. 31-36. https://doi.org/10.1016/S1750-5836(07)00014-X
  4. C. K. Yi, S. W. Hong, S. H. Jo, J. E. Son, J. H. Choi, "Absorption and Regeneration Characteristics of a Sorbent for Fluidized-Bed $CO_2$ Removal Process", Korean Chem. Eng. Res., Vol. 43, No. 2, 2005, pp. 294-298.
  5. D. Y. Lee, K. C. Kim, Y. C. Park, M. H. Han, C. K. Yi, "Analysis of $CO_2$ Capture Efficiency in Relation to the Inlet Moisture Content of the Regenerator in the Continuous Process by using Sorbent Analysis", Korean Chem. Eng. Res., Vol. 50, No. 4, 2012, pp. 654-658. https://doi.org/10.9713/kcer.2012.50.4.654
  6. Y. S. Kim, Y. C. Park, S. H. Jo, H. J. Ryu, Y. W. Rhee, C. K. Yi, "Effects of Regeneration Conditions on Sorption Capacity of $CO_2$ Dry Potassium Sorbnet During Carbonation", Korean Chem. Eng. Res., Vol. 53. No. 3, 2015, pp. 333-338. https://doi.org/10.9713/kcer.2015.53.3.333
  7. C. Zhao, X. Chen,C. Chao, "$CO_2$ Absorption Using Dry Potasium-based Sorbents with Different Supports", Energy and Fuels, Vol. 23, 2009, pp. 4683-4687. https://doi.org/10.1021/ef900182d
  8. C. Zhao, X. Chen, C. Chao, "Multiple-cycles Behavior of $K_2CO_3/Al_2O_3$ for $CO_2$ Capture in a Fluidized Bed Reactor", Energy and Fuels, Vol. 24, 2010, pp. 1009-1012. https://doi.org/10.1021/ef901018f
  9. C. K. Ryu, Y. H. Wi, "10MW 연소 후 건식 $CO_2$ 포집기술 개발", News and Information of Chemical Engineers, Vol. 29, No. 5, 2011, pp. 586-589.
  10. S. C. Lee and J. C. Kim, "Dry Potassium-based Sorbents for $CO_2$ capture", Catalysis Surveys from Asia, Vol. 11, 2007, pp. 171-185. https://doi.org/10.1007/s10563-007-9035-z
  11. S. C. Lee, B. Y. Choi, T. J. Lee, C. K. Ryu, Y. S. Ahn and J. C. Kim, "$CO_2$ Absorption and Regeneration of Alkali Metal-based Solid Sorbents", Catalysis Today, Vol. 111, 2006, pp. 385-390. https://doi.org/10.1016/j.cattod.2005.10.051
  12. S. C. Lee, H. J. Chae, S. J. Leem Y. H. Park, C. K. Ryu, C. K. Yi and J. C. Kim, "Novel Regenerable Potassium-based Dry Sorbents for $CO_2$ Capture at Low Temperature", Journal of Molecular Catalysis B, Vol. 56, 2009, pp. 179-184. https://doi.org/10.1016/j.molcatb.2008.07.007
  13. K. Kim, S. Yang, J. B. Lee, T. H. Eom, C. K Ryu, S. H. Jo, Y. C. Park, C. K. Yi, "Analysis of $K_2CO_3/Al_2O_3\;CO_2$ Sorbent Tested with Coal-fired Power Plant Flue Gas: Effect of $SO_x$", International Journal of Greenhouse Gas Control, Vol. 9, 2012, pp. 347-354. https://doi.org/10.1016/j.ijggc.2012.04.004