한국군사과학기술학회지 (Journal of the Korea Institute of Military Science and Technology)

  • 제19권6호
  • /
  • Pages.712-720
  • /
  • 2016
  • /
  • 1598-9127(pISSN)
  • /
  • 2636-0640(eISSN)
한국군사과학기술학회 (The Korea Institute of Military Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

5.56밀리 소화기탄 탄자 코어 재질 변경에 따른 동심탄의 탄도호환성 분석

Ballistic Match Analysis for 5.56 MM Bullet with New Copper Core Material

  • 고용신 (국방기술품질원 대전센터 탄약2팀) ;
  • 박용덕 ((주)풍산 부산사업장 품질보증팀)
  • Ko, Yongsin (The 2nd Ammunition Team, Daejeon Center, Defense Agency for Technology and Quality) ;
  • Park, Yongdeok (Quality Assurance Team, Poongsan corporation Busan Plant)
  • 투고 : 2016.03.18
  • 심사 : 2016.11.04
  • 발행 : 2016.12.05
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this study was to inspect ballistic match of copper bullet at 4 points by analyzing vertical deviation about shot group of the 5.56 mm common bullets and copper bullets. The 5.56 mm bullet with new copper core material was developed for mitigation of environmental pollution and harmfulness to human body. The results of this study are as follows; using the regression analysis, estimated reference value of ballistic match were 51.6 mm, 64.9 mm, 87.3 mm and 99.6 mm at 25 m, 100 m, 200 m and 250 m range respectively. When analyzing the shooting test data, alternative hypothesis(The vertical deviations are less than the reference value) was adopted as the result of analyzing data using t-test. And the values of data through tool(PRODAS) and standard trajectory equation meet requirements of estimated ballistic match respectively. In conclusion, the level of ballistic match of 5.56 mm copper bullets meets the estimated reference level through regression analysis at 4 points.

키워드

참고문헌

  1. Don Mikko, "U.S. Military Green Bullet," Association of Firearm and Tool Mark Examiners Journal, Vol. 31, No. 4, 1999.
  2. Jeong J. S., Kwon T. M., "A Study on the Development Trend Analysis of Environmental Friendly Materials," Defence Agency for Technology and Quality, Korea, pp. 3-23, 2010.
  3. Hong J. H., Jang T. S., Song. J. C., Kim B. I., “Design and Performance Analysis of Environment Friendly Double Core Bullets for Small Arms,” Journal of the Korea Institute of Military Science and Technolog, Vol. 14, No. 2, pp. 264-270, 2011. https://doi.org/10.9766/KIMST.2011.14.2.264
  4. Lee H. J., "Rifle and Ballistics," Chung Moon Gak, Korea, pp. 76-239, 2012.
  5. KDS 1305-1061-2, "CARTRIDGE, 5.56 MM, BALL, K100," Korea Defence Standard, 2004.
  6. KDS 1305-1032-5, "CARTRIDGE, 7.62 MM, NATO, BALL, KM80," Korea Defence Standard, 2011.
  7. SCATP-5.56 MM, "Small Caliber Ammunition Test Procedures 5.56 mm," The U.S. Military Standard, 1998.
  8. AMCP 706-242, "Engineering Design Handbook: Design for Control of Projectile Flight Characteristics," The U.S. Army Materiel Command, 1966.
  9. KDS 1305-1026-5, "CARTRIDGE, 5.56 MM, BALL, KM193," Korea Defence Standard, 2012.
  10. Lee J. H., "Weapon Engineering," Book Korea, Korea, pp. 82-83, 2013.