International Journal of Aeronautical and Space Sciences

  • 제17권4호
  • /
  • Pages.551-564
  • /
  • 2016
  • /
  • 2093-274X(pISSN)
  • /
  • 2093-2480(eISSN)
한국항공우주학회 (The Korean Society for Aeronautical and Space Sciences)
권호 표지
DOI QR코드

DOI QR Code

Vibratory loads and response prediction for a high-speed flight vehicle during launch events

  • Kim, Jinhyeong (Department of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Park, Seoryong (Department of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Eun, Wonjong (Department of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Shin, Sangjoon (Department of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Lee, Soogab (Department of Mechanical and Aerospace Engineering, Seoul National University)
  • 투고 : 2016.03.25
  • 심사 : 2016.10.12
  • 발행 : 2016.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

High-speed flight vehicles (HSFVs) such as space launch vehicles and missiles undergo severe dynamic loads which are generated during the launch and in in-flight environments. A typical vehicle is composed of thin plate skin structures with high-performance electronic units sensitive to such vibratory loads. Such lightweight structures are then exposed to external dynamic loads which consist of random vibration, shock, and acoustic loads created under the operating environment. Three types of dynamic loads (acoustic loads, rocket motor self-induced excitation loads and aerodynamic fluctuating pressure loads) are considered as major components in this study. The estimation results are compared to the design specification (MIL-STD-810) to check the appropriateness. The objective of this paper is to study an estimation methodology which helps to establish design specification for the dynamic loads acting on both vehicle and electronic units at arbitrary locations inside the vehicle.

키워드

참고문헌

  1. Kabe, A. M., "Design and Verification of Launch and Space Vehicle Structures", AIAA Structures, Dynamics and Materials Conference, number AIAA-98-1718, 1998.
  2. Osborne, E., Light, R., Hardy, D. and Steele, M., "Solid Rocket Engine Random Vibration", 37th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 2001.
  3. Dotson, K., Womack, J. and Grosserode, P., "Structural Dynamic Analysis of Solid Rocket Engine Resonant Burning", Journal of Propulsion and Power, Vol. 17, No. 2, 2001, pp. 347-354. https://doi.org/10.2514/2.5748
  4. Jeffrey, M. L. and Cotoni, V., "Vibroacoustic Response of the NASA ACTS Spacecraft Antenna launch Acoustic Excitation", NASA/TM-2008-215168, 2008.
  5. Larko, J. M. and Hughes, W. O., "Initial Assessment of the Ares IX Launch Vehicle Upper Stage to Vibroacoustic Flight Environments", 14th International Congress, Sound & Vibration, ICSV14, 2008.
  6. Secretariat, E. C. S. S., Spacecraft Mechanical Loads Analysis Handbook, European Cooperation for Space Standardization, 2013.
  7. Christensen, E. R., Brown, A, M. and Frady, G. P., "Calculation of Dynamic Loads Due to Random Vibration Environments in Rocket Engine Systems", 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2007, pp. 23-27.
  8. Yang, M. Y. and Wilby, J. F., "Derivation of Aero-Induced Fluctuating Pressure Environments for Ares IX", 14th AIAA/CEAS Aeroacoustics conference (29th AIAA Aeroacoustics conference), 2008.
  9. Cockburn, J. A. and Robertson, J. E., "Vibration Response of Spacecraft Shrouds to In-Flight Fluctuating Pressures", Journal of Sound and Vibration, Vol. 33, No. 4, 1974, pp. 399-425. https://doi.org/10.1016/S0022-460X(74)80226-9
  10. Lee, D. O., Han, J. H., Jang, H. W., Woo, S. H. and Kim, K. W., "Shock Response Prediction of a Low Altitude Earth Observation Satellite during Launch Vehicle Separation", International Journal of Aeronautical and Space Sciences, Vol. 11. No. 1, 2010, pp. 49-57. https://doi.org/10.5139/IJASS.2010.11.1.049
  11. Lyon, R. H., Theory and Application of Statistical Energy Analysis, RH Lyon Corp, 1998.
  12. Shi, Q., Ando, S., Murakami, K., Uchikawa, H., Iida, Y., Seagusa, H. and Koshigoe, S., "Acoustic Analysis of H-IIA Launch Vehicle Fairing Using SEA", 4th International Symposium on Environmental Testing for Space Programs, Vol. 467, 2001, pp. 425.
  13. Langley Research Center and Eldred, K. M., "Acoustic Loads Generated by the Propulsion System", National Aeronautics and Space Administration, 1971.
  14. Park, S. Y., Choung, H. C., Eun, W. J., Lee, H. J., Shin, S. J. and Lee, S. G., "Empirical Acoustic Loads Prediction of High-Speed Vehicle Including Effects of Launch Pad", Inter-Noise 2015, The 2015 International Congress and Exposition on Noise Control Engineering, 2015.
  15. VA One 2014 User's Guide: vibro-acoustics, ESI, 2014.
  16. Department of Defense USA. Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory Tests. US Department of Defense (DoD), 2000.