DOI QR코드

DOI QR Code

Assessment of Stability of Railway Abutment Using Geosynthetics

  • Kim, Ja-Yeon (Seoul National University of Science and Technology) ;
  • Kim, Ji-Hwan (Seoul National University of Science and Technology) ;
  • Cho, Kook-Hwan (Seoul National University of Science and Technology)
  • Published : 2016.09.30

Abstract

An approach section on an abutment is located between the soil embankment and the structure, which may cause an uneven surface due to different settlement between the abutment and the soil embankment. This study proposes a new type of wall which separates the abutment from the backfill material using mechanically stabilized wall. A new type of keystone which incorporates geotube and wire mesh is proposed and evaluated. Numerical analyses were performed to investigate the applicability of the proposed keystone type, which incorporates Geosynthetic. The maximum horizontal displacements along GRS wall faces, settlements at the top of pavement and track bed, and tensile forces applied on geotextiles under traffic loads were investigated. The results of the numerical analysis showed that the proposed wall can be used for highway and high-speed railway abutment.

Keywords

References

  1. Minister of Land Infrastructure and Transport Korea. Design of the Highway and streets, 2012.
  2. Korea Rail Network Authority. Korea Rail design criteria manual, 2014.
  3. Tang, Haiwei. Analysis of Highway Vehicle Jumping at Bridge-head between Pavement and Abutment of Express Highway, Computer Distributed Control and Intelligent Environmental Monitoring, International Conference, Pages 131-136, 2012.
  4. Tsang-Jiang Chen, Yung-Show Fang, M.ASCE. Earth Pressure due to Vibratory Compaction, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 134, 2008, pp. 437-444. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:4(437)
  5. Makoto Ishida, Shigeru Miura. Track Deformation Characteristics and Vehicle Running Characteristics Due to Settlement of Embankment behind the Abutment of Bridges, RTRI Report Vol 12. No. 3, 1998
  6. Abu-Hejleh, N., Wang, T., Zornberg, J.G., Performance of geosynthetic - reinforced walls supporting bridge and approaching roadway structures. ASCE Geotechnical Special Publication No. 103, Proceedings, Geo-Denver 2000, Denver, CO, pp. 218-243.
  7. M. Adams. Performance of a Prestrained Geosynthetic Reinforced Soil Bridge Pier, J.T.H. Wu (Ed.), Mechanically Stabilized Backfill, A.A. Balkema Publisher, Rotterdam, 1997, pp. 35-53
  8. Ketchart, K., Wu, J.T.H, In: Wu, Barrett. (Eds.), Performance of GRS Bridge Pier and Abutment in Denver, CO, USA. Special Presentation, Mechanically Stabilized Backfill. A.A. Balkema Publisher, Rotterdam, pp. 101-116. 1997
  9. Jorge G. Zornberg, Naser M. Abu-Hejleh,, Victor Elias, Jim Watcharamonthein, Design Assessment of the Founders/Meadows GRS Abutment Structure, Paper No. 03-3268,Transportation Research Board CD ROM, 2003
  10. Kim, D.S. Stability Evaluation of Reinforced Subgrade with Short Geogrid for Railroad During Construction, Jounal of Korean Geosynthetics Society Vol.13 No.4 2014, pp. 11-20
  11. Aoki, H., Yonezawa, T., Tateyama, M., Shinoda, M., Watanabe, K., Development of aseismic abutment with geogrid-reinforced cement-treated backfills. Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering, pp. 1315-1318. 2005
  12. Guangqing Yang, Baojian Zhang, Peng Lv, Qiaoyong Z. Behaviour of geogrid reinforced soil retaining wall with concrete-rigid facing, Geotextiles and Geomembranes Vol. 27, Issue 5, pp. 350-356. 2009 https://doi.org/10.1016/j.geotexmem.2009.03.001
  13. Jonathan T.H.Wu. Design and construction of low cost retaining walls, Colorado Transportation Institute and the Colorado Department of Transportation U.S. Forest Service University of Colorado at Denver. 1994
  14. Transportation Research Board. Design and Construction Guidelines for Geosynthetic Reinforced Soil Bridge Abutments with a Flexible Facing, National Cooperative Highway Research Report 556. 2006
  15. Sam Helwany, Jonathan Wu, Philip Meinholz. Seismic Design of of Geosynthetic-Reinforced Soil Bridge Abutments with Modular Block Facing, Contractor's Final Report for NCHRP Project 12-59 (01), National Cooperative Highway Research Program, 2012
  16. Canadian Foundation Engineering Manual (CFEM). Canadian Foundation Engineering Manual. Third Ed. Canadian Geotechnical Society, Richmond, BC, Canada, 512 pp. 1992
  17. National Concrete Masonry Association (NCMA), Design Manual for Segmental Retaining Walls. Second Ed. NCMA, Herndon, VA, USA. 1996
  18. Il-Wha Lee, Sung-Jin Lee, Su-Hyung Lee, Tae-Ho Kang. Evaluation of Deformation Characteristics for Bridge/Earthwork Transition Reinforcement Methods Considering Moving Load, Journal of the Korea Society for Railway Vol.13 No.3 pp. 298-303, 2010
  19. Won-Il, Choi. Stress Release zone Characteristics and Reinforcement around Sub-structure Constructed by Non-open Cut Method under Railway, Graduate School of Railway Seoul National University of Science and Technology Doctoral thesis, 2016.