Textile Coloration and Finishing (한국염색가공학회지)

The Korean Society of Dyers and Finishers (한국염색가공학회)
권호 표지
DOI QR코드

DOI QR Code

Preparation and Characterization of Carbon/Phenol Composite by RTM Process

RTM 공정에 의한 탄소/페놀 복합재료의 제조 및 특성 분석

  • Jin, Da Young (Korea Jacquard Textile Institute) ;
  • Lee, Hyun Jae (Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University) ;
  • Lim, Sung Chan (Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University) ;
  • Kim, Yun Chul (Agency for Defense Development) ;
  • Yun, Nam Gyun (Agency for Defense Development) ;
  • Lee, Seung Goo (Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University)
  • 진다영 (한국자카드섬유연구소) ;
  • 이현재 (충남대학교 유기소재.섬유시스템공학과) ;
  • 임성찬 (충남대학교 유기소재.섬유시스템공학과) ;
  • 김연철 (국방과학연구소) ;
  • 윤남균 (국방과학연구소) ;
  • 이승구 (충남대학교 유기소재.섬유시스템공학과)
  • Received : 2016.05.30
  • Accepted : 2016.09.12
  • Published : 2016.12.27
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, carbon/phenol composites were prepared from carbon fiber preform and phenol resin by RTM(resin transfer molding) process. And changes in the properties of the composite according to the pre-treatment of phenol resin was mainly studied. RTM process conditions were deduced from viscosity and thermal analysis of phenol resin which were rheometer and thermogravimetric analyzer(TGA). RTM process was performed under various injection and molding temperature. Characterization of the prepared C/P composites were evaluated by various analysis. Morphology of composites was analyzed by Micro-CT(MCT), Mechanical properties of composites were measured through the flexural properties. As results, volatile impurities of phenol resin were effectively removed at resin pre-treatment temperature of $100^{\circ}C$ and composite was sufficiently cured at molding temperature of $180^{\circ}C$.

Keywords

References

  1. K. D. Potter, The Eearly History of The Resin Transfer Moulding Process for Aerospace Applications, Composites Part A: Applied Science and Manufacturing, 30(5), 619(1999). https://doi.org/10.1016/S1359-835X(98)00179-1
  2. S. T. Lim and W. I. Lee, An Analysis of The Three-Dimensional Resin-Transfer Mold Filling Process, Composites Science and Technology, 60(7), 961(2000). https://doi.org/10.1016/S0266-3538(99)00160-8
  3. A. Shojaei, S. R. Ghaffarian, and S. M. H. Karimian, Modeling and Simulation Approaches in The Resin TransferMolding Process, A Review Polymer Composites, 24(4), 525(2003). https://doi.org/10.1002/pc.10050
  4. B. Chen, E. J. Lang, and T. W. Chou, Experimental and Theoretical Studies of Fabric Compaction Behavior in Resin Transfer Molding, Materials Science and Engineering A, 317(1), 188(2001). https://doi.org/10.1016/S0921-5093(01)01175-3
  5. Y. Yan, X. Shi, J. Liu, T. Zhao, and Y. Yu, Thermosetting Resin System Based on Novolak and Bismaleimide for Resin-Transfer Molding, J. of Applied Polymer Science, 83(8), 1651(2002). https://doi.org/10.1002/app.10073
  6. J. O. Park and S. H. Jang, Synthesis and Characterization of Bismaleimides from Epoxy Resins, J. of Polymer Science Part A: Polymer Chemistry, 30(5), 723(1992). https://doi.org/10.1002/pola.1992.080300504
  7. T. Kruckenberg and R. Paton, "Resin TransferMoulding for Aerospace Structures", Springer Science and Business Media, New York, pp.197-226, 2012.
  8. M. K. Kang, W. I. Lee, and H. T. Hahn, Formation of Microvoids During Resin-Transfer Molding Process, Composites Science and Technology, 60(12), 2427 (2000). https://doi.org/10.1016/S0266-3538(00)00036-1
  9. J. S. Leclerc and E. R. Leclerc, PorosityReduction using Optimized Flow Velocity in Resin Transfer Molding, Composites Part A: Applied Science and Manufacturing, 39(12), 1859(2008). https://doi.org/10.1016/j.compositesa.2008.09.008
  10. S. S. Kim and D. C. Park, Characteristics of Carbon Fiber Phenolic Composite for Journal Bearing Materials, Composite Structures, 66(1), 359(2004). https://doi.org/10.1016/j.compstruct.2004.04.057