DOI QR코드

DOI QR Code

Accumulated Rotations of Suction Bucket Foundations under Long-term Cyclic Loads in Dry Sandy Ground

건조 사질토 지반에 설치된 석션 버켓기초의 장기 반복하중에 의한 누적회전각 산정

  • Lee, Si-Hoon (Rhehwa Engineering Co., LTD.) ;
  • Choi, Changho (Geotechnical Research Institute, Korea Institute of Civil Engrg. and Building Technology) ;
  • Kim, Sung-Ryul (Dept. of Civil Eng., Dong-A Univ.)
  • Received : 2016.09.05
  • Accepted : 2016.11.14
  • Published : 2016.12.31

Abstract

A suction bucket foundation has been considered to be a potential foundation type for offshore wind turbines. A suction bucket foundation is usually installed in soft soil, so the accumulated displacement of the foundation may occur under long-term cyclic loads. In this study, a series of 1-g model tests were performed to analyze the accumulated rotation of suction bucket foundations under long-term cyclic horizontal loads. The dry model ground was prepared to have two different soil densities by air-pluviation method. The model tests were performed varying the embedment depth of the suction bucket, the soil density, and the amplitude of cyclic load. A one-way horizontal cyclic load was applied over $10^4$ cycles. Test results showed that the accumulated rotation of the suction bucket foundation increased with the increase in the number of cycles and load magnitudes. Based on the model test results, a new equation was proposed to evaluate the accumulated rotation of the suction bucket foundations in dry sandy ground under long-term cyclic horizontal loads.

최근에 해상 풍력발전기의 기초구조물로 석션 버켓기초가 적용되고 있다. 그런데, 석션기초는 보통 해양 연약지반에 설치되므로 장기 반복하중에 의해 누적변위가 발생할 수 있다. 본 연구에서는 1-g 모형실험을 수행하여 장기 수평 반복하중을 받는 석션 버켓기초의 누적 회전각을 분석하였다. 지반조건은 2가지 밀도의 건조 사질토 지반에 대하여 실험하였다. 모형석션 버켓기초의 근입깊이, 모형지반의 밀도, 반복하중의 크기를 변화시키며 실험을 수행하였다. 수평 반복하중은 일방향 재하로 최대 $10^4$번까지 재하하였다. 실험결과, 석션 버켓기초의 누적회전각은 재하횟수와 재하진폭이 증가에 비례하여 증가하였다. 실험결과를 이용하여 건조 사질토 지반에 근입된 석션 버켓기초의 장기 누적회전각을 산정할 수 있는 경험식을 제안하였다.

Keywords

References

  1. Altaee, A. and Fellenius, B. H. (1994), "Physical Modeling in Sand", Canadian Geotechnical Journal, Vol.31, No.3, pp.420-431. https://doi.org/10.1139/t94-049
  2. Been, K. and Jefferies, M. G. (1985), "A State Parameter for Sands", Geotechnique, Vol.35, No.2, pp.99-112. https://doi.org/10.1680/geot.1985.35.2.99
  3. Bransby, M. F. and Randolph, M. F. (1998), "Combined Loading of Skirted Foundations", Geotechnique, 48, pp.637-655. https://doi.org/10.1680/geot.1998.48.5.637
  4. Byrne, B. W. (2000), "Investigations of Suction Caissons in Dense Sand", PhD Dissertation, Magdalen College, University of Oxford.
  5. Cox, J. A., O'Loughlin, C. D., Cassidy, M., Bhattacharya, S., Gaudin, C., and Bienen, B. (2014), "Centrifuge Study on the Cyclic Performance of Caissons in Sand", International Journal of Physical modelling in Geotechnics, Vol.14, No.4, pp.99-115. https://doi.org/10.1680/ijpmg.14.00016
  6. Det Norske Veritas (2007), "Design of Offshore Wind Turbine Structures", Offshore standard DNV-OS-J101.
  7. Foglia, A., Ibsen, L. B., Nicolai, G., and Andersen, L. V. (2014), "Obsevations on Bucket Foundations under Cyclic Loading in Dense Saturated Sand", Proceedings of the 8 th international conference of physical modelling in geotechnics (ICPMG), CRC Press.
  8. Houlsby, G. T., Ibsen, L. B., and Byrne, B. W. (2005), "Suction Caissons for Wind Turbines", Frontiers on Offshore Geotechnics (ISFOG 2005)-Gourvenec & Cassidy (eds), Taylor & Francis group, London, ISBN 041539063X, pp.75-93.
  9. Hung, L. C. and Kim, S. R. (2014), "Evaluation of Undrained Bearing Capacities of Bucket Foundations under Combined Loads", Marine Georesources and Geotechnology 32, pp.76-92. https://doi.org/10.1080/1064119X.2012.735346
  10. Lee, J. H., Do, J. U., and Kim, S. R. (2015), "A Comparative Study on the Resistances of Bucket Foundation in Sand with Different Installation Methods", Int. J. of Geomate, Vol.8, No.1, pp.1186-1189.
  11. Kelly, R. B., Houlsby, G. T., and Byrne, B. W. (2006), "Transient Vertical Loading of Model Suction Saissons in a Pressure Chamber", Geotechnique, Vol.56, No.10, pp.665-675. https://doi.org/10.1680/geot.2006.56.10.665
  12. LeBlanc, C., Houlsby, G. T., and Byrne, B. (2010), "Response of Stiff Piles in Sand to Long-term Cyclic Lateral Loading", Geotechnique, Vol.60, No.2, pp.79-90. https://doi.org/10.1680/geot.7.00196
  13. Lee, S. H., Kim, S. R., Lee, J. Y., and Choi, C. H. (2014), "Development and Verification of Long-term Cyclic Loading Equipment to Analyze behavior of Foundation of Offshore Wind Turbine", Korean Geotechnical Engineering, Vol.30, No.10, pp.8-17. (in Korean)
  14. Luke, A. M., Rauch, A. F., Olson, R. E., and Mecham, E. C. (2005), "Components of Suction Caisson Capacity Measured in Axial Pullout Tests", Ocean Engineering 32, pp.878-891. https://doi.org/10.1016/j.oceaneng.2004.10.007
  15. Tjelta, T. I. and Haaland, G. (1993), "Novel Foundation Concept for a Jacket Finding its Place", Offshore site investigation and foundation behaviour 28, pp.717-718. https://doi.org/10.1007/978-94-017-2473-9_34
  16. Wood, D. M. (2004), Geotechnical Modelling, Spon Press, New york, USA.
  17. Villalobos, F. A. (2006), "Model Testing of Foundations for Offshore Wind Turbines", PhD dissertation, Keble College, University of Oxford.
  18. Zhu, B., Byrne, B. W., and Houlsby, G. T. (2013), "Long-term Lateral Cyclic Response of Suction Caisson Foundations in Sand", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.139, No.1, pp.73-83. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000738

Cited by

  1. 실트질 모래지반에 설치된 해상풍력 석션버켓기초의 신뢰성 해석 vol.20, pp.12, 2019, https://doi.org/10.14481/jkges.2019.20.12.41