Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Precision of a Machined Surface in Thrust Internal Grinding

스러스트 내면 연삭가공의 가공면 정도에 관한 연구

  • Received : 2016.05.18
  • Accepted : 2016.08.29
  • Published : 2016.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the grinding characteristics in thrust internal grinding have been studied using vitreous CBN wheels with a machining center. Grinding experiments have been performed according to grinding conditions such as wheel feed speed, cut depth, workpiece speed, rate of grinding width and number of grinding passes. The machining error, shape of machined surfaces, grinding force, and surface roughness have been investigated though these experiments. Based on the experimental results, the grinding characteristics on the machined surface in the internal thrust grinding are discussed.

Keywords

References

  1. Seo, Y. I., Her, M. S., Choi, H., Lee, J. C. and Cheong, S. H., "A Study on the Grinding Force Characteristics in the Internal Plunge Grinding", Journal of the Korean Society for Precision Engineering, Vol. 16, No. 12, pp. 54-59, 1999.
  2. Kim, L. S., Kim, J. M., Choi, C., Liang, L. J., Lyu, S. K., "Study on the Teeth Grinding Condition of SCM415H Gears", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 19-24, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.019
  3. Choi, H., Kim, C. S., Park, W. K., and Lee, C. S., "The Effects on a Side-cut Grinding depend on the Change of the Quill Rigidity", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 5, pp. 36-41, 2013.
  4. Choi, H., Seo, C. Y., Park, W. K., and Lee, C. S., "A Study on the Internal Thrust Grinding by Machining Center", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 55-61, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.055

Cited by

  1. Analysis of Grinding Characteristics of Ceramic (SiC) Materials vol.17, pp.1, 2018, https://doi.org/10.14775/ksmpe.2018.17.1.016
  2. 피드스루용 세라믹의 선삭 가공 특성에 관한 연구 vol.19, pp.10, 2016, https://doi.org/10.14775/ksmpe.2020.19.10.081