참고문헌
- Wang, Y., Balowski, J., Phillips, C., Phillips, R., Sims, C. E. and Allbritton, N. L., "Benchtop Micromolding of Polystyrene by Soft Lithography," Lab on a Chip, Vol. 11, No. 18, pp. 3089-3097, 2011. https://doi.org/10.1039/c1lc20281b
- Meyer, U., Buchter, A., Nazer, N. and Wiesmann, H. P., "Design and Performance of a Bioreactor System for Mechanically Promoted Three-dimensional Tissue Engineering," British Journal of Oral and Maxillofacial Surgery, Vol. 44, No. 2, pp. 134-140, 2006. https://doi.org/10.1016/j.bjoms.2005.05.001
- Sauer-Budge, A. F., Mirer, P., Chatterjee, A., Klapperich, C. M., Chargin, D. and Sharon, A., "Low Cost and Manufacturable Complete MicroTAS for Detecting Bacteria," Lab on a Chip, Vol. 9, No. 19, pp. 2803-2810, 2009. https://doi.org/10.1039/b904854e
- Hiebl, B., Lutzow, K., Lange, M., Jung, F., Seifert, B., Klein, F., Weigel, T., Kratz, K., Lendlein, A., "Cytocompatibility Testing of Cell Culture Modules Fabricated from Specific Candidate Biomaterials using Injection Molding," Journal of Biotechnology, Vol. 148, No. 1, pp. 76-82, 2010. https://doi.org/10.1016/j.jbiotec.2010.01.006
- Lee, B.-K. and Kim, J.-H., "Manufacturing of Micromolds for Plastic Molding Technologies via Synchrotron LIGA Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 1-7, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.001
- Tourovskaia, A., Figueroa-Masot, X. and Folch, A., "Differentiation-on-a-chip: A Microfluidic Platform for Long-term Cell Culture Studies," Lab on a Chip, Vol. 5, No. 1, pp. 14-19, 2005. https://doi.org/10.1039/b405719h
- Park, T. H. and Shuler, M. L., "Integration of Cell Culture and Microfabrication Technology," Biotechnology Progress, Vol. 19, No. 2, pp. 243-253, 2003. https://doi.org/10.1021/bp020143k
- Yeong, W.-Y., Chua, C.-K., Leong, K.-F. and Chandrasekaran, M., "Rapid Prototyping in Tissue Engineering: Challenges and Potential," Trends in Biotechnology, Vol. 22, No. 12, pp. 643-652, 2004. https://doi.org/10.1016/j.tibtech.2004.10.004
- McCullough, E. J. and Yadavalli, V. K., "Surface Modification of Fused Deposition Modeling ABS to Enable Rapid Prototyping of Biomedical Microdevices," Journal of Materials Processing Technology, Vol. 213, No. 6, pp. 947-954, 2013. https://doi.org/10.1016/j.jmatprotec.2012.12.015
- Jeong, Y. H., Lee, J. and Jin, S., "Fabrication of a Polymeric Film with Nanofiber-based Porous Window and Its Application to Co-culture," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 2, pp. 21-27, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.021
- Chen, P.-C., Pan, C.-W., Lee, W.-C. and Li, K.-M., "An Experimental Study of Micromilling Parameters to Manufacturing Microchannels on a PMMA Substrate," International Journal of Advanced Manufacturing Technology, Vol. 71, No. 9, pp. 1623-1630, 2014. https://doi.org/10.1007/s00170-013-5555-z
- Hong, D.-K., Ahn, C.-W., Baek, H.-S., Choi, S.-C. and Park, I.-S., "A Study on the Working Condition Effecting on the Maximum Working Temperature and Surface Roughness in Side Wall End Milling Using Design of Experiment," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 3, pp. 46-53, 2009.