DOI QR코드

DOI QR Code

An extension of an improved forced based design procedure for 3D steel structures

  • Peres, R. (Instituto Superior Tecnico, Universidade de Lisboa) ;
  • Castro, J.M. (Faculdade de Engenharia da Universidade do Porto) ;
  • Bento, R. (Instituto Superior Tecnico, Universidade de Lisboa)
  • 투고 : 2016.06.15
  • 심사 : 2016.11.11
  • 발행 : 2016.12.10

초록

This paper proposes an extension of the Improved Forced Based Design procedure to 3D steel structures. The Improved Forced Based Design (IFBD) procedure consists of a more rational sequence of the design checks proposed in Eurocode 8 and involves a more realistic selection of the behaviour factor instead of selecting an empirical value based on the ductility class and lateral resisting system adopted. The design procedure was tested on a group of four 3D steel structures, composed by moment-resisting frames with three storeys height and the same plan configuration in all storeys. The plan configuration was defined in order to target lateral restrained or unrestrained systems as well as plan regular or irregular structures. The same group of structures was also designed according to the force-based process prescribed in Eurocode 8. The member sizes obtained through the two approaches were compared and the seismic performance was assessed through nonlinear static and time-history analyses. The limit states referred to structural and non-structural damage, considering the two levels design approach, which are the serviceability and the ultimate limit states, were examined. The results obtained reveal that the IFBD leads to more economical structures that still comply with the performance requirements prescribed in Eurocode 8.

키워드

참고문헌

  1. Araujo, M., Macedo, L., Marques, M. and Castro, J.M. (2016), "Code-based record selection methods for seismic performance assessment of buildings", Earthq. Eng. Struct. Dyn., 45(1), 129-148. https://doi.org/10.1002/eqe.2620
  2. ASCE 7/SEI (2010), Minimum Design Loads for Buildings and other Structures; American Society of Civil Engineers/ Structural Engineer Institute, Reston, VA, USA.
  3. ATC3-06 (1978), Tentative provisions for the development of seismic regulations for buildings; Applied Technology Council, Redwood City, CA, USA.
  4. ATC-19 (1995), Structural response modification factors; Applied Technology Council, Redwood City, CA, USA, pp. 5-32.
  5. ATC-34 (1995), A critival review of current approaches to earthquake-resistance design; Applied Technology Council, Redwood City, CA, USA.
  6. CEN (2004), EN1998-1-3, Eurocode 8: Design of structures for earthquake resistance- Part 1: general rules, seismic actions and rules for buildings; European Committee for Standardization, Brussels, Belgium.
  7. CEN (2005), EN1998-1-1, Eurocode 3: Design of steel structures- Part 1: general rules, seismic actions and rules for buildings; European Committee for Standardization, Brussels, Belgium.
  8. Costa, A., Romao, X. and Sousa Oliveira, C. (2010), "A methodology for the probabilistic assessment of behaviour factors", Bull. Earthq. Eng., 8, 47-64. https://doi.org/10.1007/s10518-009-9126-5
  9. Elghazouli, A.Y. (2007), "Seismic design of steel Structures to Eurocode 8", The Structural Engineer, 85(12), 26-31.
  10. Elghazouli, Y. (2009), "Assessment of European seismic design procedures for steel framed structures", Bull. Earthq. Eng., 8, 65-89.
  11. Elghazouli, A.Y., Castro, J.M. and Izzuddin, B.A. (2008), "Seismic performance of composite momentresisting frames", Engineering Structures, 30(7), 1802-1819. https://doi.org/10.1016/j.engstruct.2007.12.004
  12. FEMA (2009), Recommended seismic provisions for new buildings and other structures (FEMA P 750);Federal Emergency Management Agency, Washington, D.C., USA.
  13. Ferraioli, M, Lavino, A. and Mandara, A. (2014), "Behaviour factor of code-designed steel moment-resisting frames", Int. J. Steel Struct., 14(2), 243-254. https://doi.org/10.1007/s13296-014-2005-1
  14. Karavasilis, T.H., Bazeos, N. and Beskos, D. (2007), "Behaviour factor for performance-based seismic design of plane steel moment resisting frames", J. Earthq. Eng., 11(4), 531-559. https://doi.org/10.1080/13632460601031284
  15. Kappos, J. (1999), "Evaluation of behaviour factors on the basis of ductility and overstrength studies", Eng. Struct., 21(9), 823-835. https://doi.org/10.1016/S0141-0296(98)00050-9
  16. Lee, L.H., Han, S.W. and Oh, Y.H. (1999), "Determination of ductility factor considering different hysteretic models", Earthq. Eng. Struct. Dyn., 28(9), 957-977. https://doi.org/10.1002/(SICI)1096-9845(199909)28:9<957::AID-EQE849>3.0.CO;2-K
  17. Maheri, M.R. and Akbari, R. (2003), "Seismic behaviour factor, R, for steel X-braced and knee-braced RC buildings", Eng. Struct., 25(12), 1505-1513. https://doi.org/10.1016/S0141-0296(03)00117-2
  18. Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of concrete and Masonry Structures, Jonh Wiley and Sons, London, UK.
  19. Priestley, M.J.N. and Calvi, G.M. (1991), "Towards a capacity design assessment for reinforced concrete frames", Earthq. Spectra, 7(3), 413-437. https://doi.org/10.1193/1.1585635
  20. Priestley, M.J.N., Calvi, G.M. and Kowalsky, M.J. (2007), Displacement Based Seismic Design of Structures, Istituto Universitario di Studi Superiori di Pavia, Pavia, Italy.
  21. PEER (2006), OpenSEES: Open System for Earthquake Engineering Simulation. Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.
  22. Sullivan, T.J. (2013), "Direct displacement based seismic design of steel eccentrically braced frames structures", Bull. Earthq. Eng., 11(6), 2197-2231. https://doi.org/10.1007/s10518-013-9486-8
  23. Roldan, R., Sullivan, T.J. and Della Corte, J. (2016), "Displacement-based design of steel moment resisting frames with partially-restrained beam-to-column joints", Bull. Earthq. Eng., 14(4), 1017-1046. https://doi.org/10.1007/s10518-016-9879-6
  24. Tenchini, A., D'Aniello, M., Rebelo, C., Landolfo, R., da Silva, L.S. and Lima, L. (2014), "Seismic performance of dual-steel moment resisting frames", J. Construct. Steel Res., 101, 437-454. https://doi.org/10.1016/j.jcsr.2014.06.007
  25. Tzimas, A.S., Karavasilis, T.H., Bazeos, N. and Beskos, D. (2013), "A hybrid force/displacement seismic design method for steel building frames", Eng. Struct., 56, 1452-1463. https://doi.org/10.1016/j.engstruct.2013.07.014
  26. Villani, A., Castro, J.M. and Elghazouli, A.Y. (2009), "Improved seismic design procedure for steel moment frames", Proceedings of the 6th International Conference Stessa-2009, Behaviour of Steel Structures in Seismic Areas, Philadelphia, PA, USA, August, pp. 673-678.

피인용 문헌

  1. Nonlinear Static Seismic Performance Assessment of Plan-Irregular Steel Structures pp.1559-808X, 2020, https://doi.org/10.1080/13632469.2018.1469438
  2. Evolution of EC8 Seismic Design Rules for X Concentric Bracings vol.12, pp.11, 2020, https://doi.org/10.3390/sym12111807