DOI QR코드

DOI QR Code

Seismic behavior of steel frames with replaceable reinforced concrete wall panels

  • Wu, Hanheng (School of Civil Engineering, Chang'an University) ;
  • Zhou, Tianhua (School of Civil Engineering, Chang'an University) ;
  • Liao, Fangfang (School of Civil Engineering, Chang'an University) ;
  • Lv, Jing (School of Civil Engineering, Chang'an University)
  • 투고 : 2016.05.03
  • 심사 : 2016.11.10
  • 발행 : 2016.12.10

초록

The paper presents an innovative steel moment frame with the replaceable reinforced concrete wall panel (SRW) structural system, in which the replaceable concrete wall can play a role to increase the overall lateral stiffness of the frame system. Two full scale specimens composed of the steel frames and the replaceable reinforced concrete wall panels were tested under the cyclic horizontal load. The failure mode, load-displacement response, deformability, and the energy dissipation capacity of SRW specimens were investigated. Test results show that the two-stage failure mode is characterized by the sequential failure process of the replaceable RC wall panel and the steel moment frame. It can be found that the replaceable RC wall panels damage at the lateral drift ratio greater than 0.5%. After the replacement of a new RC wall panel, the new specimen maintained the similar capacity of resisting lateral load as the previous one. The decrease of the bearing capacity was presented between the two stages because of the connection failure on the top of the replaceable RC wall panel. With the increase of the lateral drift, the percentage of the lateral force and the overturning moment resisted by the wall panel decreased for the reason of the reduction of its lateral stiffness. After the failure of the wall panel, the steel moment frame shared almost all the lateral force and the overturning moment.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation of China

참고문헌

  1. ABAQUS (2011), Abaqus analysis user's manual, (Version 6.10), Dassault Systemes Simulia Corp., Providence, RI, USA.
  2. Anil, O. and Altin, S. (2007), "An experimental study on reinforced concrete partially infilled frames", Eng. Struct., 29(10), 449-460. https://doi.org/10.1016/j.engstruct.2006.05.011
  3. Bao, Y.B. and Wierzbicki, T. (2004), "On fracture locus in the equivalent strain and stress triaxiality space", Int. J. Mech. Sci., 46(1), 81-98. https://doi.org/10.1016/j.ijmecsci.2004.02.006
  4. Berman,J.W., Celik,O.C. and Bruneau, M. (2005), "Comparing hysteretic behavior of light-gauge steel plate shear walls and braced frames", Eng. Struct., 27(3), 475-485. https://doi.org/10.1016/j.engstruct.2004.11.007
  5. Cao, P.Z., Feng, N.N. and Wu, K. (2014), "Experimental study on infilled frames strengthened by profiled steel sheet bracing", Steel Compos. Struct., Int. J., 17(6), 777-790. https://doi.org/10.12989/scs.2014.17.6.777
  6. Dubina, D. and Dinu, F. (2014), "Experimental evaluation of dual frame structures with thin-walled steel panels", Thin-Wall. Struct., 78, 57-69. https://doi.org/10.1016/j.tws.2014.01.001
  7. GB50010 (2010), Code for design of concrete structures, Ministry of housing and urban-rural development of the People's Republic of China, Beijing, China. [In Chinese]
  8. GB50011 (2010), Code for Seismic Design of Buildings, Ministry of housing and urban-rural development of the People's Republic of China, Beijing, China. [In Chinese]
  9. GB50017 (2003), Code for design of steel structures, Ministry of housing and urban-rural development of the People's Republic of China, Beijing, China. [In Chinese]
  10. Gholipour, M. and Alinia, M.M. (2016), "Behavior of multi-story code-designed steel plate shear wall structures regarding bay width", J. Constr. Steel. Res., 122, 40-56. https://doi.org/10.1016/j.jcsr.2016.01.020
  11. Han, L.H., Li, W. and Yang, Y.F. (2009), "Seismic behaviour of concrete-filled steel tubular frame to RC shear wall high-rise mixed structures", J. Constr. Steel. Res., 65(5), 1249-1260. https://doi.org/10.1016/j.jcsr.2008.12.005
  12. Han, Q., Wang, Y., Xu, J. and Xing, Y. (2015), "Static behavior of stud shear connectors in elastic concrete-steel composite beams", J. Constr. Steel. Res., 113, 115-126. https://doi.org/10.1016/j.jcsr.2015.06.006
  13. Ju, R.S., Lee, H.I., Chen, C.C. and Tao, C.C. (2012), "Experimental study on separating reinforced concrete infill walls from steel moment frames", J. Constr. Steel. Res., 71, 119-128. https://doi.org/10.1016/j.jcsr.2011.10.004
  14. Ke, K. and Chen, Y.Y. (2014), "Energy-based damage-control design of steel frames with steel slit walls", Struct. Eng. Mech., Int. J., 52(6), 1157-1176. https://doi.org/10.12989/sem.2014.52.6.1157
  15. Khoshnoud, H.R. and Marsono, K. (2016), "Experimental study of masonry infill reinforced concrete frames with and without corner openings", Struct. Eng. Mech., Int. J., 57(4), 641-656. https://doi.org/10.12989/sem.2016.57.4.641
  16. Kim,J., Kwon, M., Seo, H. and Jung, W. (2015), "Performance evaluation of GIP wall systems for strengthening steel-frame structures", Compos. Struct., 125, 228-238. https://doi.org/10.1016/j.compstruct.2015.02.021
  17. Kurata, M., Leon, R.T., DesRoches, R. and Nakasshima, M. (2012), "Steel plate shear wall with tensionbracing for seismic rehabilitation of steel frames", J. Constr. Steel. Res., 71, 92-103. https://doi.org/10.1016/j.jcsr.2011.10.026
  18. Liao, F.F., Wang, W. and Chen, Y.Y. (2015), "Ductile fracture prediction for welded steel connections under monotonic loading based on micromechanical fracture criteria", Eng. Struct., 94, 16-28. https://doi.org/10.1016/j.engstruct.2015.03.038
  19. Pathirana, S.W., Uy, B., Mirza, O. and Zhu, X. (2015), "Strengthening of existing composite steel-concrete beams utilising bolted shear connectors and welded studs", J. Constr. Steel. Res., 114, 417-430. https://doi.org/10.1016/j.jcsr.2015.09.006
  20. Saari, W.K., Hajjar, J.F., Schultz, A.E. and Shield, C.K. (2004), "Behavior of shear studs in steel frames with reinforced concrete infill walls", J. Constr. Steel. Res., 60(10), 1453-1480. https://doi.org/10.1016/j.jcsr.2004.03.003
  21. Seo, J., Varma, A.H., Sener, K. and Ayhan, D. (2016), "Steel-plate composite (SC) walls: In-plane shear behavior, database, and design", J. Constr. Steel. Res., 119, 202-215. https://doi.org/10.1016/j.jcsr.2015.12.013
  22. Sun, G.H., He, R.Q., Gu, Q. and Fang, Y.Z. (2011), "Cyclic behavior of partially-restrained steel frame with RC infill walls", J. Constr. Steel. Res., 67(12), 1821-1834. https://doi.org/10.1016/j.jcsr.2011.06.002
  23. Tong, X.D., Hajjar, J.F., Schultz, A.E. and Shield, C.K. (2005), "Cyclic behavior of steel frame structures with composite reinforced concrete infill walls and partially-restrained connections", J. Constr. Steel. Res., 61(4), 531-552. https://doi.org/10.1016/j.jcsr.2004.10.002
  24. Topkaya, C. and Atasoy, M. (2009), "Lateral stiffness of steel plate shear wall systems", Thin-Wall. Struct., 47(8-9), 827-835. https://doi.org/10.1016/j.tws.2009.03.006
  25. Topkaya, C. and Kurban, C.O. (2009), "Natural periods of steel plate shear wall systems", J. Constr. Steel. Res., 65(3), 542-551. https://doi.org/10.1016/j.jcsr.2008.03.006
  26. Uva, G., Porco, F. and Fiore, A. (2012), "Appraisal of masonry infill walls effect in the seismic response of RC framed buildings: A case study", Eng. Struct., 34, 514-526. https://doi.org/10.1016/j.engstruct.2011.08.043
  27. Yu, H.L. and Jeong, D.Y. (2010), "Application of a stress triaxiality dependent fracture criterion in the finite element analysis of unnotched Charpy specimens", Theor. Appl. Fract. Mec., 54(1), 54-62. https://doi.org/10.1016/j.tafmec.2010.06.015

피인용 문헌

  1. Experimental and numerical study on the hysteretic behavior of composite partially restrained steel frame-reinforced concrete infill walls with vertical slits 2018, https://doi.org/10.1007/s10518-017-0245-0
  2. Study on seismic behavior of steel frame with external hanging concrete walls containing recycled aggregates vol.157, 2017, https://doi.org/10.1016/j.conbuildmat.2017.09.152
  3. Experimental Study on Seismic Behavior of Steel Frames with Infilled Recycled Aggregate Concrete Shear Walls vol.9, pp.21, 2016, https://doi.org/10.3390/app9214723
  4. Seismic performance of a steel frame assembled with a CFST-bordered composite wall structure vol.219, pp.None, 2020, https://doi.org/10.1016/j.engstruct.2020.110853
  5. Effect of Anchor Bars on Seismic Behavior of Infilled Walled Frames vol.24, pp.10, 2016, https://doi.org/10.1007/s12205-020-1979-9
  6. Cyclic performance of steel moment frames with prefabricated RC and ECC wall panels vol.242, pp.None, 2016, https://doi.org/10.1016/j.engstruct.2021.112492