DOI QR코드

DOI QR Code

판재를 이용한 초고속 위협체의 방호성능에 대한 해석적 연구

Investigation Into Protection Performance of Projectile Using Flying Plate

  • 최효성 (서울과학기술대학교 자동차공학과) ;
  • 신현호 (강릉원주대학교 재료공학과) ;
  • 유요한 (국방과학연구소) ;
  • 박장현 (한양대학교 미래자동차공학과) ;
  • 김종봉 (서울과학기술대학교 자동차공학과)
  • Choi, Hyoseong (Department of Automotive Engineering, Seoul National University of Science and Technology) ;
  • Shin, Hyunho (Department of Materials Engineering, Gangneung-Wonju National University) ;
  • Yoo, Yo-Han (Agency for Defense Development) ;
  • Park, Jahng Hyon (Department Automotive Engineering, Hanyang University) ;
  • Kim, Jong-Bong (Department of Automotive Engineering, Seoul National University of Science and Technology)
  • 투고 : 2016.02.02
  • 심사 : 2016.08.29
  • 발행 : 2016.12.01

초록

We investigated the protection capability of a plate against high speed projectiles demonstrating collision and penetration behaviors by finite element analysis. The element erosion method was used for penetration analysis, which showed that the speed of the projectile was slightly reduced by the collision with the protection plate. Protection capability was measured by the projectile's attitude angle change because the damage of our tanks by projectiles was also dependent on the projectile-tank collision angle. When the length of the protection plate was sufficiently long, the projectile was severely deformed and incapacitated. In the case of a small plate, the projectile was deformed only in the collision region. Thus, projection capability was investigated by the change of attitude angle. The effect of collision angle, velocity, and length of the plate on the rotational and vertical velocities of the projectile was investigated.

키워드

참고문헌

  1. Cho, S. H., Song, Y.- W., and Kim, G.-L., "A Study on Counter-Munition for Active Protection System according to Fragmentation Type," Proc. of the Korean Institute of Military Science and Technology, pp. 72-75, 2005.
  2. Held, M., "Disturbance of Shaped Charge Jets by Bulging Armour," Propellants Explosives Pyrotechnics, Vol. 26, No. 4, pp. 191-195, 2001. https://doi.org/10.1002/1521-4087(200110)26:4<191::AID-PREP191>3.0.CO;2-C
  3. Yadav, H. and Kamat, P., "Effect of Moving Plate on Jet-Penetration," Propellants, Explosives, Pyrotechnics, Vol. 14, No. 1, pp. 12-18, 1989. https://doi.org/10.1002/prep.19890140104
  4. Paik, S., Kim, S., Yoo, Y., and Lee, M., "Protection Performance of Dual Flying Oblique Plates Against a Yawed Long-Rod Penetrator," International Journal of Impact Engineering, Vol. 34, No. 8, pp. 1413-1422, 2007. https://doi.org/10.1016/j.ijimpeng.2006.06.006
  5. Liden, E., Johansson, B., and Lundberg, B., "Effect of Thin Oblique Moving Plates on Long Rod Projectiles: A Reverse Impact Study," International Journal of Impact Engineering, Vol. 32, No. 10, pp. 1696-1720, 2006. https://doi.org/10.1016/j.ijimpeng.2005.02.004
  6. Liden, E., Andersson, O., and Lundberg, B., "Deformation and Fracture of a Long-Rod Projectile Induced by an Oblique Moving Plate: Experimental Tests," International Journal of Impact Engineering, Vol. 38, No. 12, pp. 989-1000, 2011. https://doi.org/10.1016/j.ijimpeng.2011.07.002
  7. Liden, E., Mousavi, S., Helte, A., and Lundberg, B., "Deformation and Fracture of a Long-Rod Projectile Induced by an Oblique Moving Plate: Numerical Simulations," International Journal of Impact Engineering, Vol. 40, pp. 35-45, 2012.
  8. Gao, T. and Cho, J.-U., "A Study on Damage and Penetration Behaviour of Carbon Fiber Reinforced Plastic Sandwich at Various Impacts," Int. J. Prec. Eng. Manuf., Vol. 16, No. 8, pp. 1845-1850, 2015. https://doi.org/10.1007/s12541-015-0240-9
  9. Hur, J.-W., "A Study on the Ballistic Damage Tolerance Design of Aircraft Structure from Armor Piercing Bullet Hits," Int. J. Prec. Eng. Manuf., Vol. 12, No. 1, pp. 85-90, 2011. https://doi.org/10.1007/s12541-011-0010-2
  10. Choi, Y. S, Lee, J. W., Yoo, Y.-H., and Yun, K.-J., "A Study on the Behavior of Blast Proof Door under Blast Load," Int. J. Prec. Eng. Manuf., Vol. 17, No. 1, pp. 119-124, 2016. https://doi.org/10.1007/s12541-016-0015-y
  11. Jung, W. K., Ahn, S. H., Lee, W. I., Kim, H. J., and Kwon, J. W., "Fracture Mechanism of Ceramic/Galss-Fiber-Reinforced-Composites Laminate by High Velocity Impact," J. Korean Soc. Precis. Eng., Vol. 23, No. 5, pp. 170-176, 2006.
  12. Johnson, G. R. and Cook, W. H., "A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates, and High Temperatures," Proc. of the 7th International Symposium on Ballistics, pp. 541-547, 1983.
  13. Yoo, Y. H. and Lee, M., "Prediction Effectiveness of an Oblique Plate Against a Long Rod," International Journal of Impact Engineering, Vol. 33, No. 1, pp. 872-879, 2006. https://doi.org/10.1016/j.ijimpeng.2006.09.073
  14. Yoo, Y. H., Paik, S. H., Kim, J.-B. and Shin, H., "Performance of a Flying Cross Bar to Incapacitate a Long-Rod Penetrator Based on a Finite Element Model," Engineering with Computers, Vol. 29, No.4, pp. 409-415, 2013. https://doi.org/10.1007/s00366-012-0257-y
  15. Yu, Y.-H., Jang, S.-N., and Jeong, D.-T., "Numerical Simulation of High-Velocity Oblique Impact of Mild Steel Spheres Against Mild Steel Plates," Transactions of the Korean Society of Mechanical Engineers A, Vol. 26, No. 3, pp. 576-585, 2002. https://doi.org/10.3795/KSME-A.2002.26.3.576
  16. Yoo, Y. H., "Numerical Simulation of High-Velocity Oblique Impacts of Yawed Long Rod Projectile Against Thin-Plate," Transactions of the Korean Society of Mechanical Engineers A, Vol. 26, No. 7, pp. 1426-1437, 2002. https://doi.org/10.3795/KSME-A.2002.26.7.1426
  17. Zukas, J. A. and Gaskill, B., "Ricochet of a Deforming Projectiles from Deforming Plates," International Journal of Impact Engineering, Vol. 18, No. 6, pp. 601-610, 1996. https://doi.org/10.1016/0734-743X(95)00060-N
  18. Murali, V. and Naik, S. D., "Ricochet Angle for Armament Shapes," International Journal Application or Innovation in Engineering and Management, Vol. 2, pp. 86-92, 2013.
  19. Gee, D. and Littlefield, D., "Yaw Impact of Rod Projectile," International Journal of Impact Engineering, Vol. 26, No. 1, pp. 211-220, 2001. https://doi.org/10.1016/S0734-743X(01)00086-0
  20. HowStuffWorks SCIENCE, "Right Now in Science," http://science.howstuffworks.com (Accessed 14 November 2016)