참고문헌
- Kim, W. B., "A Study on Improvement of Manufacturing Process for Airplane Reservoir of Al7075," M.Sc. Thesis, Department of Mechanical Engineering, Changwon National University, 2016.
- Shin, O. C., Jung, S. R., and Jung, Y. G., "Development of Centerless Superfinishing System Using Abrasive Film," Journal of the Korean Society of Manufacturing Technology Engineers, pp. 88-92, 2005.
- Kim, W. B., Kim, T. H., Cho, Y. T., and Jung, Y. G., "Study on Improvement of Manufacturing Process for Airplane Reservoir of Anodized Al7075," Proc. of KSPE Autumn Conference, p. 21, 2015.
- Kim, W. B., Cho, Y. T., Jung, Y. G., and Choi, J. D., "Manufacturing Process Improvement for Precision Inner Surface Polishing of Anodizing Treated Airplane Reservoir," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 72-77, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.072
- Kim, S. K., Cho, Y. T., and Jung, Y. G., "Determination of Efficient Superfinishing Condition for Mirror Surface Finishing of Stainless Steel," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 2, pp. 99-105, 2013.
- Cho, K. S., Kim, S. K., Cho, Y. T., and Jung, Y. G., "A Experimental Study on Efficient Applicable Combination of Super Finishing Films for Mirror Surface Machining," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 1, pp. 121-128, 2014. https://doi.org/10.14775/ksmpe.2014.13.1.121
- Kim, P. H., Kim, J. S., Park, J. H., Kang, I. S., and Lee, J. H., "A Cutting Condition Optimization of Al7075 Turning Operation with Experimental Design Method," Korea Society of Machine Tool Engineers, pp. 406-408, 2010.
- Cha, J. H. and Han, S. B., "Searching Optimal Cutting Condition for Surface Roughness in Turning Operation on Inconel 718 Using Taguchi Method," Korea Society of Machine Tool Engineers, Vol. 19, No. 2, pp. 295-300, 2010.
- Chi, L. Z., Lee, S. J., Park, H. M., Kwak, J. S., and Ha, M. K., "Surface Roughness Analysis of Surface Grinding by Design of Experiments," Proc. of the KS MTE Autumn Conference, pp. 54-59, 2004.
- Lee, S. B., "Utilizing Taguchi Method Using Minitab," Eretec, pp. 35-80, 2015.
- Park, J. C. and Shin, S. M., "A Simulation-Based Optimization of Design Parameters for Cooling System of Injection Mold by Using ANOVA with Orthogonal Array," The Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 5, pp. 121-128, 2012.
- Kim, N. H., "The Selection of the Optimal Condition of Plug Using the Taguchi Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 6, pp. 109-114, 2011.
- Kim, S. K., Yoon, Y. M., and Jung, Y. G., "The Evaluation of the Laser Machinability for Mechanical Materials Using Taguchi Experimental Method Design," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 73-78, 2012.
- Cho, C. Y. "Analysis of Cutting Edge Geometry Effect on Surface Roughness in Ball-End Milling Using the Taguchi Method," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 23, No. 6, pp. 569-575, 2014. https://doi.org/10.7735/ksmte.2014.23.6.569