The Journal of Advanced Prosthodontics

  • 제8권1호
  • /
  • Pages.16-20
  • /
  • 2016
  • /
  • 2005-7806(pISSN)
  • /
  • 2005-7814(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지
DOI QR코드

DOI QR Code

Effects of different surface finishing procedures on the change in surface roughness and color of a polymer infiltrated ceramic network material

  • Ozarslan, Mehmet Mustafa (Department of Prosthodontics, Faculty of Dentistry, Akdeniz University) ;
  • Buyukaplan, Ulviye Sbnem (Department of Prosthodontics, Faculty of Dentistry, Akdeniz University) ;
  • Barutcigil, Cagtay (Department of Restorative Dentistry, Faculty of Dentistry, Akdeniz University) ;
  • Arslan, Merve (Department of Prosthodontics, Faculty of Dentistry, Akdeniz University) ;
  • Tuker, Nurullah (Department of Prosthodontics, Faculty of Dentistry, Akdeniz University) ;
  • Barutcigil, Kubilay (Department of Prosthodontics, Faculty of Dentistry, Akdeniz University)
  • 투고 : 2015.07.30
  • 심사 : 2016.01.12
  • 발행 : 2016.02.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PURPOSE. Polymer infiltrated ceramic network (PICN) materials, also called hybrid ceramics, are new materials in dental market. The manufacturer of the PICN material VITA Enamic suggests 3 different finishing procedures for this new material. In the present study, surface roughness and color differences caused from different finishing procedures of VITA Enamic were investigated. MATERIALS AND METHODS. 120 specimens were prepared in dimensions $2{\times}10{\times}12mm$ from VITA Enamic hybrid ceramic blocks with 'high translucency' and 'translucency 2M2' shades. The specimens were divided into 8 groups. For each group, different finishing procedures suggested by the manufacturer were performed. Surface roughness values were determined by a tactile portable profilometer. Color changes were evaluated using a clinical spectrophotometer. The data were analyzed using one-way ANOVA and Tukey's post-hoc comparison. The significance level was set at ${\alpha}=0.05$. RESULTS. The roughest surfaces were observed in Glaze Groups. Their surface roughness values were similar to that of the control group. Clinical Kit and Technical Kit groups did not show a statistically significant difference regarding surface roughness (P>.05). The largest color difference regarding ${\Delta}E_{00}$ was observed in Clinical Kit finishing groups. There were also statistically significant color changes between the groups (P<.05). However, all the groups showed clinically acceptable color change (${\Delta}E_{00}$<2.25) except Clinical Kit Groups (${\Delta}E_{00}$>2.25). CONCLUSION. Within the limitations of the present study, it may be suggested that finishing the VITA Enamic restorations by Technical Kit instead of Glaze and Clinical Kit gives better clinical performance in regard to surface roughness and shade matching.

키워드

참고문헌

  1. Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramic-network material. Dent Mater 2014;30:564-9. https://doi.org/10.1016/j.dental.2014.02.019
  2. Coldea A, Swain MV, Thiel N. In-vitro strength degradation of dental ceramics and novel PICN material by sharp indentation. J Mech Behav Biomed Mater 2013;26:34-42. https://doi.org/10.1016/j.jmbbm.2013.05.004
  3. He LH, Swain M. A novel polymer infiltrated ceramic dental material. Dent Mater 2011;27:527-34. https://doi.org/10.1016/j.dental.2011.02.002
  4. Nguyen JF, Ruse D, Phan AC, Sadoun MJ. High-temperaturepressure polymerized resin-infiltrated ceramic networks. J Dent Res 2014;93:62-7. https://doi.org/10.1177/0022034513511972
  5. Ghinea R, Perez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent 2010;38:e57-64. https://doi.org/10.1016/j.jdent.2010.07.008
  6. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013;29:419-26. https://doi.org/10.1016/j.dental.2013.01.002
  7. Coldea A, Swain MV, Thiel N. Hertzian contact response and damage tolerance of dental ceramics. J Mech Behav Biomed Mater 2014;34:124-33. https://doi.org/10.1016/j.jmbbm.2014.02.002
  8. Bottino MA, Campos F, Ramos NC, Rippe MP, Valandro LF, Melo RM. Inlays made from a hybrid material: adaptation and bond strengths. Oper Dent 2015;40:E83-91. https://doi.org/10.2341/13-343-L
  9. van der Burgt TP, ten Bosch JJ, Borsboom PC, Kortsmit WJ. A comparison of new and conventional methods for quantification of tooth color. J Prosthet Dent 1990;63:155-62. https://doi.org/10.1016/0022-3913(90)90099-X
  10. Uludag B, Usumez A, Sahin V, Eser K, Ercoban E. The effect of ceramic thickness and number of firings on the color of ceramic systems: an in vitro study. J Prosthet Dent 2007; 97:25-31. https://doi.org/10.1016/j.prosdent.2006.11.002
  11. Monasky GE, Taylor DF. Studies on the wear of porcelain, enamel, and gold. J Prosthet Dent 1971;25:299-306. https://doi.org/10.1016/0022-3913(71)90191-0
  12. Jung YS, Lee JW, Choi YJ, Ahn JS, Shin SW, Huh JB. A study on the in-vitro wear of the natural tooth structure by opposing zirconia or dental porcelain. J Adv Prosthodont 2010;2: 111-5. https://doi.org/10.4047/jap.2010.2.3.111
  13. Fasbinder DJ, Neiva GF. Surface Evaluation of Polishing Techniques for New Resilient CAD/CAM Restorative Materials. J Esthet Restor Dent 2015 Jul 14.
  14. Haghi HR, Asadzadeh N, Sahebalam R, Nakhaei M, Amir JZ. Effect of denture cleansers on color stability and surface roughness of denture base acrylic resin. Indian J Dent Res 2015;26:163-6. https://doi.org/10.4103/0970-9290.159149
  15. Roque AC, Bohner LO, de Godoi AP, Colucci V, Corona SA, Catirse AB. Surface roughness of composite resins subjected to hydrochloric acid. Braz Dent J 2015;26:268-71. https://doi.org/10.1590/0103-6440201300271
  16. Talu S, Stach S, Klaic B, Misic T, Malina J, Celebic A. Morphology of Co-Cr-Mo dental alloy surfaces polished by three different mechanical procedures. Microsc Res Tech 2015;78:831-9. https://doi.org/10.1002/jemt.22547
  17. Quirynen M. The clinical meaning of the surface roughness and the surface free energy of intra-oral hard substrata on the microbiology of the supra-and subgingival plaque: results of in vitro and in vivo experiments. J Dent 1994;22:S13-6. https://doi.org/10.1016/0300-5712(94)90165-1

피인용 문헌

  1. Effect of Different Surface Treatments on Bond Strength of Resin Cement to a CAD/CAM Restorative Material pp.1059941X, 2016, https://doi.org/10.1111/jopr.12574
  2. Wear Behavior of Ceramic CAD/CAM Crowns and Natural Antagonists vol.10, pp.3, 2017, https://doi.org/10.3390/ma10030244
  3. Discoloration of PMMA, composite, and PEEK vol.21, pp.4, 2017, https://doi.org/10.1007/s00784-016-1892-2
  4. Effects of staining liquids and finishing methods on translucency of a hybrid ceramic material having two different translucency levels vol.9, pp.5, 2017, https://doi.org/10.4047/jap.2017.9.5.387
  5. Assessing staining resistance of a CAD/CAM interpenetrating network composite material vol.14, pp.1, 2018, https://doi.org/10.1186/s13005-018-0184-2
  6. A literature review on the new polymer-infiltrated ceramic-network material (PICN) vol.30, pp.4, 2018, https://doi.org/10.1111/jerd.12370
  7. Surface deterioration of monolithic CAD/CAM restorative materials after artificial abrasive toothbrushing vol.10, pp.4, 2018, https://doi.org/10.4047/jap.2018.10.4.271
  8. Evaluation of the Functional Impression Technique with Various Impression Materials on the Surface Topography of Dental Stone Casts and Their Effect on Retention vol.08, pp.07, 2018, https://doi.org/10.4236/ojst.2018.87024
  9. Clinical Evaluation of Silorane-based Resin Composites in the Posterior Teeth: An 18 Months Follow-up Study vol.7, pp.2, 2016, https://doi.org/10.5005/jp-journals-10015-1367
  10. Clinical Evaluation of Silorane-based Resin Composites in the Posterior Teeth: An 18 Months Follow-up Study vol.7, pp.2, 2016, https://doi.org/10.5005/jp-journals-10015-1367
  11. Effect of different beverages on the color stability and microhardness of CAD/CAM hybrid versus feldspathic ceramic blocks: An in-vitro study vol.3, pp.2, 2017, https://doi.org/10.1016/j.fdj.2017.07.001
  12. Effect of different beverages on the color stability and microhardness of CAD/CAM hybrid versus feldspathic ceramic blocks: An in-vitro study vol.3, pp.2, 2017, https://doi.org/10.1016/j.fdj.2017.07.001
  13. Biomechanical properties of polymer-infiltrated ceramic crowns on one-piece zirconia implants after long-term chewing simulation vol.4, pp.None, 2016, https://doi.org/10.1186/s40729-018-0127-5
  14. Surface Topography, Gloss and Flexural Strength of Pressable Ceramic After Finishing-Polishing Protocols vol.30, pp.2, 2016, https://doi.org/10.1590/0103-6440201902101
  15. Surface roughness of two different monolithic materials after chewing simulation vol.12, pp.7, 2016, https://doi.org/10.4103/jioh.jioh_272_19
  16. Influence of the Coca-Cola Drinks on the Overall Color of Glazed or Polished Porcelain Veneers Fabricated from Different Materials and Thicknesses: An In Vitro Study vol.21, pp.1, 2016, https://doi.org/10.5005/jp-journals-10024-2705
  17. An in vitro evaluation of the effect of polishing on the stainability of different CAD/CAM ceramic materials vol.32, pp.3, 2020, https://doi.org/10.1016/j.sdentj.2019.08.005
  18. Effects of Khat on Surface Roughness and Color of Feldspathic and Zirconia Porcelain Materials under Simulated Oral Cavity Conditions vol.56, pp.5, 2016, https://doi.org/10.3390/medicina56050234
  19. 단시간과 장시간의 소결방법에 따른 지르코니아의 굴곡 강도와 미세구조의 변화 vol.42, pp.2, 2016, https://doi.org/10.14347/kadt.2020.42.2.73
  20. Evaluation of the Color Stability of 3D-Printed Crown and Bridge Materials against Various Sources of Discoloration: An In Vitro Study vol.13, pp.23, 2016, https://doi.org/10.3390/ma13235359
  21. Evaluation of the failure modes and load-bearing capacity of different surface-treated polyether ether ketone copings veneered with lithium di-silicate compared to polyether ether ketone copings venee vol.21, pp.3, 2016, https://doi.org/10.4103/jips.jips_86_21
  22. Comparative analysis of flexural strength of abraded and polished porcelain surfaces - an in vitro study vol.14, pp.1, 2021, https://doi.org/10.25122/jml-2020-0085
  23. Optical properties of bisacryl‐, composite‐, ceramic‐ resin restorative materials: An aging simulation study vol.33, pp.6, 2016, https://doi.org/10.1111/jerd.12653
  24. Effects of Artificial Tooth Brushing and Hydrothermal Aging on the Mechanical Properties and Color Stability of Dental 3D Printed and CAD/CAM Materials vol.14, pp.20, 2021, https://doi.org/10.3390/ma14206207
  25. Influence of Toothbrush Abrasion and Surface Treatments on Roughness and Gloss of Polymer-Infiltrated Ceramics vol.13, pp.21, 2016, https://doi.org/10.3390/polym13213694