Abstract
Sensing module of standing and moving human body using shutter method was developed. The module consists of Fresnel lens, pyroelectric infrared (PIR) sensor, interface circuit of the PIR, micro control unit(MCU), and alarm light emitting diode(LED). The principle for standing human body is chopping the thermal of human body using camera shutter. The human sensing signal in MCU by algorithm of interrupt function is detected. By unifying an apparatus and print circuit board(PCB), the developed module can be replaced as commercial moving human body detector. Experiment results show that sensing distance is about 7.0m and sensing angles is about $110^{\circ}$ at room temperature. In these condition, sending ratio was 100% and the power dissipation of the module was 100mW.
셔터방식의 쵸퍼를 이용한 정지 및 이동인체 감지 모듈을 개발하였다. 감지 모듈은 프레넬 렌즈(Fresnel lens), 초전형적외선(pyroelectric infrared : PIR) 센서, 센서 인터페이스 회로, MCU(micro control unit) 그리고 경보 LED(light emitting diode)로 구성된다. 정지 인체 감지 원리는 PIR 센서에서 나오는 신호를 카메라 셔터를 이용하여 인체의 열을 쵸핑하여 감지하는 방식이다. MCU에서 인터럽트 함수를 제어하는 알고리즘을 통해 정지 및 이동 인체 신호를 감지하게 하였다. 개발한 감지 모듈은 기구부와 PCB(print circuit board)를 일체화함으로써 종래의 상용화되고 있는 이동인체 감지 모듈을 대체 가능하다. 실내 상온에서의 실험 결과, 감지거리는 약 7.0m, 감지각도는 $110^{\circ}$로 측정되었다. 이런 조건에서 감지률은 100%이였고 모듈의 소비 전력는 100mW이였다.