참고문헌
- T. Kamo, R. Ando, M. Sasaki, T. Suzuki and Y. Watanabe, Ultra high strength steel for sustainable building structures, NSSMC Technical Report, No. 10 (Sep. 2015), 65-69
- Y. Zhou, J. Chen, Y. Xu and Z. Liu, Effects of Cr, Ni and Cu on the corrosion behavior of low carbon microalloying steel in a Cl-containing environment, J. Mater. Sci. Technol., 29 (2013), 168-174 https://doi.org/10.1016/j.jmst.2012.12.013
- S. J. Kim, Y. J. Kwak, T. Y. Kim, W. S. Jung and K. Y. Kim, Surface darkening phenomenon of Zn-Mg coated steel exposed to aqueous environment at high temperature, J. Mater. Res., 30 (2015), 3605-3615 https://doi.org/10.1557/jmr.2015.356
- A. P. Yadav, H. Katayama, K. Noda, H. Masuda, A. Nishikata and T. Tsuru, Surface potential distribution over a zinc/steel galvanic couple corroding under thin layer of electrolyte, Electrochem. Acta, 52 (2007), 3121-3129 https://doi.org/10.1016/j.electacta.2006.09.061
- H. C. Jung and J. W. Lee, Recent development of structural steel and its weldability for construction, J. Weld. Join., 27 (2009), 49-58
- E. Shigeru and N. Naoki, Development of thermo-mechanical control process (TMCP) and high performance steel in JFE steel, JFE Technical Report, No. 20 (Mar. 2015), 1-7
- S. Nobuo, M. Shinji and E. Shigeru, Recent development in microstructural control technologies through the thermo-mechanical control process (TMCP) with JFE steel's high-performance plates, JFE Technical Report, No. 11 (June. 2008), 1-6
- O. Akio, N. Kei, M. Yasuhiro, High performance 590 N/mm2 class thermo-mechanical control process (TMCP) steel plate "HBLTM 440" for building structure, JFE Technical Report, No. 20 (Mar. 2015), 26-33
- I. Maroef, D. L. Olson, M. Eberhart and G. R. Edwards, Hydrogen trapping in ferritic steel weld metal, Inter. Mater. Rev., 47 (2002), 191-223 https://doi.org/10.1179/095066002225006548
- S. J. Kim, D. W. Yun, D. W. Suh and K. Y. Kim, Electrochemical hydrogen permeation measurement through TRIP steel under loading condition of phase transition, Electro. Comm., 24 (2012), 112-115 https://doi.org/10.1016/j.elecom.2012.09.002
-
Y. Suzui, H. Tokinoya, H. Niwa, M. Yamanaka, K. Nakatsuka and I. Okada, Development of beam-to-box column connection with 1000-N/
$mm^2$ class ultra-highstrength steel, 大林組技術硏究所報, 77 (2013), 1-8 - K. Tomoya, I. Yasuo, F. Kouji, S. Masamichi, N. Toshiyuki, H. Tomoyuki, F. Shoichiro, K. Isao, T. Motohide, K. Susumu and T. Kenzo, Development of 1000N class GMA and SA weld materials for buildings, J. Japan Weld. Soc., 29 (2011), 114-124 https://doi.org/10.2207/qjjws.29.114
- A. Kojima, M. Fujioka, M. Hoshino, G. Shigesato, M. Kaneko and M. Tanaka, Progress of high performance steel plates, NSSMC Technical Report, No. 110 (Sep. 2015), 3-7
- A. Kojima, A. Kiyose, R. Uemori, M. Minagawa, M. Hoshino, T. Nakashima, K. Ishida and H. Yasui, Super high HAZ toughness technology with fine microstructure imparted by fine particles, Nippon Steel Technical Report, No 90 (July. 2004), 2-6
- C. Zener, Grains, phases, interfaces, an interpretation of microstructure, Trans. AIME., 175 (1948), 15-51
- K. Yamamoto, T. Hasegawa and J. Takamura, Effect of B on the intra-granular ferrite formation in Ti-oxides bearing steels, Tetsu to Hagane, 79 (1993), 1169-1175 https://doi.org/10.2355/tetsutohagane1955.79.10_1169
- Y. Kitani, R. Ikeda, K. Yasuda, K. Oi and K. Ichimiya, Improvement of HAZ toughness for high heat input welding by using boron diffusion from weld metal, Weld. in the World, 51 (2007), 31-36
- K. Homma, M. Tanaka, K. Matsuoka, T. Kasuya and H. Kawasaki, Development of application technologies for bridge high-performance steel, BHS, Nippon Steel Technical Report, No. 97 (Jan. 2008), 51-57
- C. Miki, A. Ichikawa, T. Kusunoki and F. Kawabata, Proposal for bridge high-performance steels (BHS500/BHS700W), Collection of Papers of Japan Society of Civil Engineers, 738 (July. 2003), 1-10
- N. Kimihiro, M. Kazuyuki and T. Naoyoshi, High performance steel plates for bridge construction-High strength steel plates with excellent weldability realizing advanced design for rationalized fabrication of bridges-, JFE Technical Report, No. 5 (Mar. 2005), 30-36
- K. S. Kyung and D. W. Lee, Development of fabrication technique for steel bridge using high strength steel, J. Korean Soc. of Steel Const., 14 (Sep. 2002) 36-52
- M. Stratmann, K. Bohnenkamp and T. Ramchandran, The investigation of the corrosion properties of metals, covered with adsorbed electrolyte layers-A new experimental technique, Corrs. Sci., 27 (1987), 869-872 https://doi.org/10.1016/0010-938X(87)90043-6
- M. Kimura and H. Kihira, Nanoscopic mechanism of protective rust formation on weathering steel surfaces, Nippon Steel Technical Report, No 91 (Jan. 2005), 86-90
- G.V. Samsonov, The Oxide Handbook, 2nd ed. (Plenum, New York, 1982)
- S. Kodama, Y. Ishida, Y. Miyazaki and T. Nose, Touchup-less welding wire for high corrosion resistance galvanized steel plates, NSSMC Technical Report, No. 108 (Mar. 2015), 77-80
피인용 문헌
- Behavior Characteristics of PCM Infilled Floor System at Elevated Temperature vol.17, pp.2, 2017, https://doi.org/10.9712/KASS.2017.17.2.033