Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지
DOI QR코드

DOI QR Code

Estimation Model of Energy Expenditure of Working in a Clean Room for Manufacturing Embedded Needles by Ergonomic Programs

인간공학 프로그램에 의한 매선 제작 청정실작업의 에너지소모량 예측 모델

  • 정태은 (인덕대학교 메카트로닉스과)
  • Received : 2015.10.26
  • Accepted : 2015.12.15
  • Published : 2016.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to estimate the energy expenditure of working in a clean room for manufacturing embedded needles by ergonomic programs. Embedding needle is one of medical devices and it should be manufactured in a clean room. 3D static strength prediction program was used to analyze the slow movements during embedding needle manufacturing in a clean room. Also the energy expenditure prediction program was used to estimate energy expenditure rates for materials handling tasks to help assure worker safety and health in clean room. The energy expenditures of the tasks were calculated using prediction equations derived from empirical data. The energy expenditure rate of 3.09 kcal/min in a clean room didn't exceed the 3.5 kcal/min action limit guideline for an average 8-hour day set by the National Institute for Occupational Safety and Health (NIOSH). Energy consumption was calculated on the same working conditions as EEPP program, using an average body weight of female 20 years old to 59 years who would be the candidates of the real workers.

Keywords

References

  1. Kee, D.H. and Park, K.H., 2005, Comparison of Posture Classification Schemes of OWAS, RULA and REBA, Journal of the KOSOS, 20(2), pp.127-132.
  2. Yang, S.H. and Jeon, S.H., 2001, Comparison of the Ergonomic Evaluation Tools for the Working Postures, J. of Korean Association of Security and Safety, 4(1), pp.41-48.
  3. Myung, S.H. and Lee, J.W., 2003, Analysis and Visualization of the Human Simulation Using Commercial Solution, Proceedings of the Society of CAD/CAM Engineers Conference.
  4. Song, Y.J. and Lee, K.W., 2005, Integrated Product Design Environment to Support the Human-Centered Design, Proceedings of the Society of CAD/CAM Engineers Conference, pp.87-96.
  5. Lee, Y.S. and Kim, K.A., 1999, A Study on Fig. 14 Normalized value of weight, total element energy and total cycle energy Fig. 15 Normalized value of weight and total energy rate the Thermal Comfort of Clean Room Gloves, J. of the Korean Society of Living Environmental System, 6(2), pp.17-23.
  6. Editorial Department of Korea Air Cleaning Association, 1997, International Standard of Technology for Cleanrooms and Associated Controlled Environments (ISO14644-1, ISO 14644-2), Air Cleaning Technology, 10(4), pp.19-20.
  7. Lee, K.S., Ko, M.K., Lee, J.H., Kim, M.J. and Hong, K.E., 2011, The Effect of Facial Embedding Therapy on Skin Elasticity and Moisture Content, The Journal of Korean Acupuncture & Moxibustion Society, 28(5), pp.111-119.
  8. Chaffin, D.B., Andersson, G.J. and Martin, B.J., 2006, Occupational Biomechanics, 4th Edition, J. Wiley & Sons, Inc., New York.
  9. The University of Michigan, Center for Ergonomics, 2011, 3D Static Strength Prediction Program, Version 6.0.5. User's Manual
  10. Lee, C.J., Chun, Y.U., Choi, Y.H. and Cho, A., 2002, Causes and Preventive Measures for Low Back Pain Industrial Accidents Suffered by Automobile Assembly Workers, Fall Conference of the Ergonomics Society of Korea, pp.119-123.
  11. Kim, Y.C. and Kim, D.S., 2012, Development of New Method for Whole-Body Working Postures: K-OWAS, J. of the Ergonomics Society of Korea, 31(1), pp.165-170. https://doi.org/10.5143/JESK.2012.31.1.165
  12. The University of Michigan, Center for Ergonomics, 2011, Energy Expenditure Prediction Program$^{TM}$, Version 2.0.
  13. Woo, J.H., Kang, D.M., Shin, Y.C., Kim, M.O., Son, M.J., Kim, B.W., Cho, B.M. and Lee, S.I., 2006, Energy Expenditure of Male Blue Collar Workers, J. of Korean Society of Occupational and Environmental Hygiene, 16(1), pp.183-192.
  14. Kang, D.M., Woo, J.H., Lee, Y.H., Cho, B.M. and Lee, S.I., 2004, Validity of the Energy Expenditure Prediction Program to Evaluate Energy Expenditure During Work", Korean J. of Occupational and Environmental Medicine, 16(3), pp.303-315.
  15. Jung, M.K., Lee, K.W., Cho, H.D., Kim, T.W., Yanzhao, M. and Lee, S.H., 2007, Digital Human Modeling for Human-centered CAD System, Transactions of the Society of CAD/CAM Engineers, 12(6), pp.429-440.
  16. Kim, J.N., Jeong, S.H. and Jee, H.S., 2008, Part Assembly Sequences for Human Assembler Posture, Transactions of the Society of CAD/CAM Engineers, 13(5), pp.391-402.
  17. http://sizekorea.kr/