대한토목학회논문집 (KSCE Journal of Civil and Environmental Engineering Research)

  • 제36권6호
  • /
  • Pages.969-977
  • /
  • 2016
  • /
  • 1015-6348(pISSN)
  • /
  • 2799-9629(eISSN)
대한토목학회 (Korean Society of Civil Engeneers)
권호 표지
DOI QR코드

DOI QR Code

장지간 프리스트레스트 콘크리트 바닥판의 정적 거동 평가

Evaluation on Static Behavior of Long Span Prestressed Concrete Deck

  • 주상훈 (단국대학교 토목환경공학과) ;
  • 정철헌 (단국대학교 토목환경공학과) ;
  • 이한주 (단국대학교 토목환경공학과)
  • 투고 : 2016.06.03
  • 심사 : 2016.09.23
  • 발행 : 2016.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

강합성 소수 거더교에 적용되는 장지간 프리스트레스트 콘크리트(PSC) 바닥판에 대해 정적재하실험을 수행하였다. 장지간 바닥판의 구조거동의 평가를 위해서는 바닥판 지간(교축직각방향 길이)이 긴 만큼 충분한 교축방향의 길이를 갖는 실험체 모델을 대상으로 해야 하는데, 이러한 실험체 크기는 운반, 실험공간 등의 제약으로 인해 실제 장지간 바닥판의 크기로 구조거동을 평가하는데 어려움이 있다. 따라서, 본 연구에서는 바닥판 실험체의 교축방향 길이를 감소시키고, 실제 장지간 바닥판 크기에 대한 교축방향의 바닥판 강성을 실험체 모델에 모사하기 위해 보강재(H-beam)를 적용하는 방법을 제안하였으며, 이를 통해 장지간 바닥판의 파괴거동과 구조성능을 평가하였다.

In this paper, the static load test of long span PSC deck used in the twin steel plate girder bridge was conducted. To evaluate the structural behavior of long span deck, longitudinally sufficient length of deck is needed, but it is difficult to test the full-scale long span deck due to limit of transportation, setting and laboratory space. Therefore, this study proposed a method to apply longitudinal stiffness of the full-scale deck to the test specimen of longitudinally short length, and it was reinforced with the steel beam. The failure behavior and structural performance of the long span deck were evaluated by the proposed test specimen deck.

키워드

참고문헌

  1. ABAQUS (2009). Abaqus analysis user's manual version 6.9, Dassault Systemes Simulia Corp.
  2. Chung, C. H. and Lee, H. J. (2003). "Static and fatigue behavior of the long span precast decks." Journal of the Korean Society of Civil Engineers, Vol. 23, No. 4A, pp. 721-731 (in Korean).
  3. Chung, C. H. and Lee, H. J. (2008). Design Method of Long Span Bridge Decks, Technical Report Series, Korea Bridge Design & Engineering Research Center (KBRC) (in Korean).
  4. Chung, C. H., Lee, H. J. and Hwang, H. H. (2004). "A study on the design bending moments of long span decks." Journal of the Korean Society of Civil Engineers, Vol. 24, No. 2A, pp. 431-437 (in Korean).
  5. Chung, C. H., Lee, H. J. and Joo, S. H. (2016). "A study on the design bending moments of long span decks with KL-510 Load." Journal of the Korean Society of Civil Engineers, Vol. 36, No. 3, pp. 375-384 (in Korean). https://doi.org/10.12652/Ksce.2016.36.3.0375
  6. Hognestad, E. (1951). A Study of Combined Bending and Axial Load in Reinforced Concrete Members, Bulletin 399, University of Illinois Engineering Experiment Station, Urbana, Ill.
  7. Hwang, H. H., Joh, C. B., Kim, Y. J. and Kim, B. S. (2006). "Influence of prestress on punching shear strength of long-span bridge decks." The Korean Society of Civil Engineers (KSCE) 2006 Conference, pp. 731-734 (in Korean).
  8. KHBDC (2015). Korea Highway Bridge Design Code: Limit states design method (in Korean).
  9. Korean Industrial Standards (2005). Method of test for compressive strength of concrete, KS F 2405, Korean Standards Association (in Korean).
  10. Lee, H. J., Chung, C. H. and Lee, Y. W. (2004). "A study on the thickness of long span decks considering orthotropy." Journal of the Korean Society of Civil Engineers, Vol. 24, No. 4A, pp. 731-737 (in Korean).
  11. Matsui, S. and Egashira, K. (1997). "Study on design bending moment for various concrete floor slabs on highway bridges." Technology reports of the osaka university, Vol. 47, No. 2277, pp. 89-101.
  12. MIDAS (2012). MIDAS CIVIL 2012 user's manual, MIDAS Information Technology Co., Ltd. (in Korean).
  13. Ministry of Land, Transport and Maritime Affairs (2012). Concrete Structure Code, Korea Concrete Institute (in Korean).