DOI QR코드

DOI QR Code

A preliminary case study of resilience and performance of rehabilitated buildings subjected to earthquakes

  • Hadigheh, S. Ali (School of Civil Engineering, The University of Sydney) ;
  • Mahini, S. Saeed (Discipline of Civil and Environmental Engineering, University of New England) ;
  • Setunge, Sujeeva (Department of Civil Engineering, School of Engineering, RMIT University) ;
  • Mahin, Stephen A. (Department of Civil and Environmental Engineering, University of California)
  • 투고 : 2016.03.16
  • 심사 : 2016.08.24
  • 발행 : 2016.12.25

초록

Current codes design the buildings based on life safety criteria. In a performance-based design (PBD) approach, decisions are made based on demands, such as target displacement and performance of structure in use. This type of design prevents loss of life but does not limit damages or maintain functionality. As a newly developed method, resilience-based design (RBD) aims to maintain functionality of buildings and provide liveable conditions after strong ground movement. In this paper, the seismic performance of plain and strengthened RC frames (an eight-story and two low-rise) is evaluated. In order to evaluate earthquake performance of the frames, the performance points of the frames are calculated by the capacity spectrum method (CSM) of ATC-40. This method estimates earthquake-induced deformation of an inelastic system using a reduced response spectrum. Finally, the seismic performances of the frames are evaluated and the results are compared with a resilience-based design criterion.

키워드

참고문헌

  1. ABA (2005), Iranian Concrete Code, Islamic Republic of Iran Management and Planning Organization.
  2. Applied Technology Council (ATC) (1996), Seismic Evaluation and Retrofit of Concrete Buildings, Report No. ATC-40, Redwood City, California.
  3. AS1170.4 (1993), Structural design Actions Part 4: Earthquake Actions in Australia, Standards Australia, Sydney, Australia.
  4. AS1170.4 (2007), Structural design Actions Part 4: Earthquake Actions in Australia, Standards Australia, Sydney, Australia.
  5. AS3600 (2001), Concrete Structures, Standards Australia, Homebush Bay, Australia.
  6. Biondini, F., Camnasio, E. and Titi, A. (2015), "Seismic resilience of concrete structures under corrosion", Earthq. Eng. Struct. Dyn., 44(14), 2445-2466. https://doi.org/10.1002/eqe.2591
  7. Borzi, B. and Elnashai, A.S. (2000), "Refined force reduction factors for seismic design", Eng. Struct., 22(10), 1244-1260. https://doi.org/10.1016/S0141-0296(99)00075-9
  8. Chang, S. and Shinozuka, M. (2004), "Measuring improvements in the disaster resilience of communities", Earthq. Spectra, 20(3), 739-755. https://doi.org/10.1193/1.1775796
  9. Cimellaro, G.P. (2013), Resilience-based design (RBD) modelling of civil infrastructure to assess seismic hazards, in Handbook of Seismic Risk Analysis and Management of Civil Infrastructure Systems, Woodhead Publishing, 912.
  10. Cimellaro, G.P., Reinhorn, A.M. and Bruneau, M. (2010), "Framework for analytical quantification of disaster resilience", Eng. Struct., 32(11), 3639-3649. https://doi.org/10.1016/j.engstruct.2010.08.008
  11. Cimellaro, G.P. (2008), "Seismic resilience of a regional system of hospitals, Multidisciplinary Center for Earthquake Engineering Research (MCEER) publication, , Buffalo University, USA.
  12. Cimellaroa, G.P., Reinhornb, A.M. and Bruneau, M. (2010), "Seismic resilience of a hospital system", Struct. Infrastruct. Eng., 6(1-2), 127-144. https://doi.org/10.1080/15732470802663847
  13. Federal Emergency Management Agency (FEMA- 276) (1999), Example applications of the NEHRP guidelines for the seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington, D.C.
  14. Federal Emergency Management Agency (FEMA- 356) (2000), Prestandard and commentary for the seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington, D.C.
  15. Ghobarah, A. (2001), "Performance-based design in earthquake engineering: state of development, Eng. Struct., 23(8), 878-884. https://doi.org/10.1016/S0141-0296(01)00036-0
  16. Hadigheh, S.A., Mahini, S.S. and Maheri, M.R. (2014), "Seismic behaviour of FRP-retrofitted reinforced concrete frames, J. Earthq. Eng., 18(8), 1171-1197. https://doi.org/10.1080/13632469.2014.926301
  17. HAZUS-MH (2016), Technical Manual, Department of Homeland Security Federal Emergency Management Agency Mitigation Division Washington, D.C.
  18. Lumantarna, E., Lam, N., Wilson, J. and Griffith, M. (2010), "Inelastic displacement demand of strengthdegraded structures", J. Earthq. Eng., 14(4), 487-511. https://doi.org/10.1080/13632460903336910
  19. Mahini, S.S. (2005), "Rehabilitation of exterior RC beam-column joints using web-bonded FRP sheets", Ph.D. Thesis, The University of Queensland.
  20. Mahini, S.S., Hadigheh, S.A. and Setunge, S. (2015a), "Seismic resilience of retrofitted reinforced concrete buildings", Proceedings of the Second International Conference on Performance-based and Life-cycle Structural Engineering (PLSE 2015), Brisbane, Australia.
  21. Mahini, S.S., Setunge, S. and Hadigheh, S.A. (2015b), "Performance vs resilience-based earthquake design for low and medium-rise retrofitted RC buildings", Proceedings of the Tenth Pacific Conference on Earthquake Engineering Building an Earthquake-Resilient Pacific (PCEE2015), Sydney, Australia.
  22. Mahini, S.S. and Ronagh, H.R. (2011), "Numerical modelling for monitoring the hysteretic behaviour of CFRP-retrofitted RC exterior beam-column joints", Struct. Eng. Mech., 38(1), 27-37. https://doi.org/10.12989/sem.2011.38.1.027
  23. Mahini, S.S. and Ronagh, H.R. (2009), "Numerical modelling of FRP strengthened RC beam-column joints", Struct. Eng. Mech., 32(5), 649-665. https://doi.org/10.12989/sem.2009.32.5.649
  24. Makarios, T.K. (2012), "Seismic nonlinear static new method of spatial asymmetric multi-storey reinforced concrete buildings", Struct. Des. Tall Spec. Build., 21(11), 800-823. https://doi.org/10.1002/tal.640
  25. Mwafy, A.M. and Elnashai, A.S. (2001), "Static pushover versus dynamic collapse analysis of RC buildings", Eng. Struct., 23(5), 407-424. https://doi.org/10.1016/S0141-0296(00)00068-7
  26. Mwafy, A.M. and Elnashai, A.S. (2002), "Calibration of force reduction factors of RC buildings", J. Earthq. Eng., 6(2), 239-273. https://doi.org/10.1080/13632460209350416
  27. Niroomandi, A., Maheri, A., Maheri, M.R. and Mahini, S.S. (2010), "Seismic performance of ordinary RC frames retrofitted at joints by FRP sheets", Eng. Struct, 32(8), 2326-2336. https://doi.org/10.1016/j.engstruct.2010.04.008
  28. Noor, F.A. and Boswell, L.F. (1992), Elsevier Science Pub. Co., 357.
  29. Standard No. 2800 (2005), Iranian code of practice for seismic resistant design of buildings, Building and Housing Research Center, Tehran, Iran.
  30. Viti, S., Cimellaro, G.P. and Reinhorn, A.M. (2006), "Retrofit of a hospital through strength reduction and enhanced damping", Smart Struct. Syst., 2(4), 339-355. https://doi.org/10.12989/sss.2006.2.4.339
  31. Wilson, J.L., Lam, N.T.K. and Pham, L. (2008), "Development of the new Australian earthquake loading standard", EJSE Special Issue: Earthquake Engineering in the low and moderate seismic regions of Southeast Asia and Australia, 25-31.
  32. Zou, X.K., Teng, J.G., De Lorenzis, L. and Xia, S.H. (2007), "Optimal performance-based design of FRP jackets for seismic retrofit of reinforced concrete frames", Composites Part B: Engineering, 38(5-6), 584-597. https://doi.org/10.1016/j.compositesb.2006.07.016

피인용 문헌

  1. 구조물의 회복탄력성 기반 성능평가법에 대한 고찰 및 적용 방안에 관한 연구 vol.20, pp.4, 2020, https://doi.org/10.9712/kass.2020.20.4.159
  2. Effect of cracked section properties on the resilience based seismic performance evaluation of a building vol.34, pp.None, 2016, https://doi.org/10.1016/j.istruc.2021.08.035
  3. Optimal seismic retrofitting of existing buildings considering environmental impact vol.250, pp.None, 2016, https://doi.org/10.1016/j.engstruct.2021.113391
  4. Durability design criteria for the hybrid carbon fibre reinforced polymer (CFRP)-reinforced geopolymer concrete bridges vol.35, pp.None, 2016, https://doi.org/10.1016/j.istruc.2021.10.087