DOI QR코드

DOI QR Code

Mathematical simulation of surfactant flushing process to remediate diesel contaminated sand column

  • Asadollahfardi, Gholamreza (Environmental Engineering, Department of Civil Engineering, Kharazmi University) ;
  • Darban, Ahmad Khodadadi (Environmental Engineering, Department of Mining Engineering, Tarbiat Modares University) ;
  • Noorifar, Nazila (Environmental Engineering, Department of Civil Engineering, Kharazmi University) ;
  • Rezaee, Milad (Geotechnical Engineering, Department of Civil Engineering, Kharazmi University)
  • 투고 : 2016.03.11
  • 심사 : 2016.11.28
  • 발행 : 2016.12.25

초록

This paper presents a numerical model based on a UTCHEM simulator to simulate surfactant flushing process to remediate diesel contaminated sand column. For this purpose, we modeled remediation process under 10000 and 20000 ppm initial concentrations of diesel. Various percent-mass sodium dodecyl sulfate (SDS) considered in our model. The model results indicated that 0.3 percent-mass of SDS at 10000 ppm and 0.1 percent-mass of SDS at 20000 ppm initial diesel concentration had maximum removal perdition which is in agreement with the experiment results. For 10000 ppm diesel concentrations, the coefficient of determination ($R^2$) and index of agreement (IA) between the model result and the experimental data were 0.9952 and 0.9695, respectively, and for 20000 ppm diesel concentrations, $R^2$ and IA were 0.9977 and 0.9935, respectively. The sensitivity analysis of permeability illustrated that in all diesel concentrations and SDS percent-mass with increasing permeability the model resulted in more removal efficiency.

키워드

참고문헌

  1. Al-Shalabi, E.W., Sepehrnoori, K. and Delshad, M. (2015), "Numerical simulation of the LSWI effect on hydrocarbon recovery from carbonate rocks", Petroleum Science and Technology, 33(5), 595-603. https://doi.org/10.1080/10916466.2014.1003940
  2. Asadollahfardi, G., Khodadi, A. and Javadifar, N. (2013), "UTCHEM model application for prediction of crude oil removal from contaminated sand columns", J. Geol. Soc. India, 82(6), 712-718. https://doi.org/10.1007/s12594-013-0209-1
  3. Bear, J. (1979), Hydraulics of Groundwater. New York: McGraw-Hill.
  4. Bernardez, L.A., Therrien, R., Lefebvre, R. and Martel, R. (2009), "Simulating the injection of micellar solutions to recover diesel in a sand column", J. Contamin. Hydrol., 103(3), 99-108. https://doi.org/10.1016/j.jconhyd.2008.09.009
  5. Brown, C.L., Pope, G.A., Abriola, L.M. and Sepehrnoori, K. (1994), "Simulation of surfactant-enhanced aquifer remedition", Water Resource. Res., 30(11), 2959-2977. https://doi.org/10.1029/94WR01458
  6. Christ, J.A., Lemke, L.D. and Abriola, L.M. (2005), "Comparison of two-dimensional and three-dimensional simulations of dense nonaqueous phase liquids (DNAPLs): Migration and entrapment in a nonuniform permeability field", Water Resource. Res., 41(1), W01007.
  7. Couto, H.J.B., Massarani, G., Biscaia, E.C. and Sant'Anna, G.L. (2009), "Remediation of sandy soils using surfactant solutions and foams", J. Haz. Mater., 164(2), 1325-1334. https://doi.org/10.1016/j.jhazmat.2008.09.129
  8. Delshad, M., Pope, G.A. and Sepehrnoori, K. (1996), "A compositional simulator for modeling surfactant enhanced aquifer remediation, 1 formulation", J. Contamin. Hydrol., 23(4), 303-327. https://doi.org/10.1016/0169-7722(95)00106-9
  9. Deshpande, S., Shiau, B.J., Wade, D., Sabatini, D.A. and Harwell, J.H. (1999), "Surfactant selection for enhancing ex situ soil washing", Water Res., 33(2), 351-360. https://doi.org/10.1016/S0043-1354(98)00234-6
  10. Francy, D.S., Thomas, J.M., Raymond, R.L. and Ward, C.H. (1991), "Emulsification of hydrocarbons by subsurface bacteria", J. Indust. Microbiol., 8(4), 237-245. https://doi.org/10.1007/BF01576061
  11. Khalladi, R., Benhabiles, O., Bentahar, F. and Moulai-Mostefa, N. (2009), "Surfactant remediation of diesel fuel polluted soil", J. Haz. Mater., 164(2), 1179-1184. https://doi.org/10.1016/j.jhazmat.2008.09.024
  12. Krause, P., Boyle, D.P. and Base, F. (2005), "Comparison of different efficiency criteria for hydrological model assessment", Adv. Geosci., 5, 89-97. https://doi.org/10.5194/adgeo-5-89-2005
  13. Lee, K.S. (2010), "Numerical simulation of surfactant-enhanced remediation of heterogeneous aquifer contaminated with nonaqueous phase liquids", J. Mater. Cycle. Waste Manage., 12(3), 193-203. https://doi.org/10.1007/s10163-010-0288-7
  14. Ouyang, Y., Cho, J.S. and Mansell, R.S. (2002), "Simulated formation and flow of microemulsions during surfactant flushing of contaminated soil", Water Res., 36(1), 33-40. https://doi.org/10.1016/S0043-1354(01)00193-2
  15. Qin, X.S., Huang, G.H., Chakma, A., Chen, B. and Zeng, G.M. (2007), "Simulation-based process optimization for surfactant-enhanced aquifer remediation at heterogeneous DNAPL-contaminated sites", Sci. Tot. Environ., 381(1), 17-37. https://doi.org/10.1016/j.scitotenv.2007.04.011
  16. Roeder, E. and Falta, R.W. (2001), "Modeling unstable alcohol flooding of DNAPL-contaminated columns", Adv. Water Resource., 24, 803-819. https://doi.org/10.1016/S0309-1708(00)00072-5
  17. Saeidnia, S., Asadollahfardi, G. and Khodadadi, D.A. (2016), "Simulation of adsorption of antimony on zero-valent iron nanoparticles coated on the industrial minerals (kaolinite, bentonite and perlite) in mineral effluent", Desalin. Water Treat., 57(47), 22321-22328. https://doi.org/10.1080/19443994.2015.1130656
  18. Salehian, E. (2007), "Remediation of diesel contaminated soil by anionic surfactant. Dissertation", Tarbiat Modares University, Tehran.
  19. Schaerlaekens, J., Mertens, J., Van Linden, J., Vermeiren, G., Carmeliet, J. and Feyen, J. (2006), "A multi-objective optimization framework for surfactant-enhanced remediation of DNAPL contaminations", J. Contamin. Hydrol., 86(3), 176-194. https://doi.org/10.1016/j.jconhyd.2006.03.002
  20. St-Pierre, C., Martel, R., Gabriel, U., Lefebrvre, R., Robert, T. and Hawari, J. (2004), "TCE recovery mechanisms using micellar and alcohol solutions:phase diagrams and sand column experiments", J. Contamin. Hydrol., 71(1),155-192. https://doi.org/10.1016/j.jconhyd.2003.09.010
  21. Urum, K., Grigson, S., Pekdemir, T. and McMenamy, S. (2006), "A comparison of the efficiency of different surfactants for removal of crude oil from contaminated soils", Chemosphere, 62, 1403-1410. https://doi.org/10.1016/j.chemosphere.2005.05.016
  22. Van Dyke, M.I., Couture, P., Brauer, M., Lee, H. and Trevors, J.T. (1993), "Pseudomonas aeruginosa UG2 rhamnolipid biosurfactants: structural characterization and their use in removing hydrophobic compounds from soil", Can. J. Microbiol., 39(11), 1071-1078. https://doi.org/10.1139/m93-162
  23. Vreysen, S. and Maes, A. (2005), "Remediation of a diesel contaminated, sandy-loam soil using low concentrated surfactant solutions", J. Soil. Sediment., 5(4), 240-244. https://doi.org/10.1065/jss2005.10.146
  24. Zhu, K., Hart, W. and Yang, J. (2005), "Remediation of petroleum-contaminated loess soil by surfactant-enhanced flushing technique", J. Environ. Sci. Hlth., Part A: Toxic Hazardous Substances and Environmental Engineering, 40, 1877-1893. https://doi.org/10.1080/10934520500183899

피인용 문헌

  1. An Implicit Finite Difference Model for Electrokinetic Remediation of Cd-Spiked Kaolinite Under Acid-Enhanced and Unenhanced Conditions pp.1573-2967, 2018, https://doi.org/10.1007/s10666-018-9610-x
  2. Numerical Study of Droplet Dynamics on a Solid Surface with Insoluble Surfactants vol.35, pp.24, 2019, https://doi.org/10.1021/acs.langmuir.9b00495