참고문헌
- Aquino, R. and Tamura, Y. (2013). Framework for structural damping predictor models based on stick-slip mechanism for use in wind-resistant design of buildings. Journal of Wind Engineering and Industrial Dynamics, 117(2013), 25-37. https://doi.org/10.1016/j.jweia.2013.04.001
- ASCE 7-10. (2010) Minimum Design Loads for Buildings and Other Structures. American Society of Civil Engineers.
- Choi, H. and Joseph, L. (2012). Outrigger system design considerations. International Journal of High-Rise Buildings, 1(3), 237-246.
- Constantinou, M. C., Tsopelas, P., Hammel, W., and Sigaher, A. N. (2001). Toggle-brace-damper seismic energy dissipation systems. J. Struct. Eng. 127(2), 105-112. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(105)
- Council of Tall Buildings and Urban Habitat. (2008). Recommendations for Seismic Design of High-Rise Buildings. (available at www.ctbuh.org)
- Fang, C., Tan, P., Chang, C. M., and. Zhou, F. L. (2015). A general solution for performance evaluation of a tall building with multiple damped and undamped outriggers. Struct. Design Tall Spec. Build. 24, 797-820. https://doi.org/10.1002/tal.1212
- Gamaleil, R. (2008). Frequency-based response of damped outrigger system for tall buildings, MIT, Boston, MA.
- Jackson, M. and Scott, D. (2010). Increasing efficiency in tall buildings by damping. Structures Congress, pp. 3132- 3142.
- Park, K., Kim, D., Yang, D., Joung, D., Ha, I. and Kim, S. (2010). A comparison study of conventional construction methods and outrigger damper system for the compensation of differential column shortening in high-rise buildings. International Journal of Steel Structures, 10(4), 317-324. https://doi.org/10.1007/BF03215840
- PEER Tall Building Initiative - "Guidelines for Performance- Based Seismic Design of Tall Buildings". PEER 2010.
- Smith, R., Merello, R., and Willford, M. (2010). Intrinsic and supplementary damping in tall buildings. Proceedings of the Institution of Civil Engineers, Structures and Buildings 16, April 2010 Issue SB2, Pages 111-118, doi: 10.1680/ stbu.2010.163.2.111
- Smith, R. J. and Willford, M. R. (2007). The damped outrigger concept for tall buildings. Struct. Des. Tall Special Build. 16(4), 501-517. https://doi.org/10.1002/tal.413
- Tamura, Y. and Suganuma, S. (1996). Evaluation of amplitude dependent damping and natural frequency of buildings during strong winds. Journal of Wind Engineering and Industrial Dynamics.
- Taylor, D. (2001). Buildings - design for damping. Taylor Devices, N.Tonawanda, NY.
- Wang, Z., Chang, C. M., Spencer Jr, B. F., and Chen, Z. (2010). Controllable outrigger damping system for high rise building with MR dampers. SPIE, 7647 p.76473Z.
- Willford, M. (2009). private correspondence
- Willford, M. and Smith, R. (2008). Performance based seismic and wind engineering for 60 story twin towers in Manila. Proc 14WCEE, Beijing, China.
- Zhou, Y., Zhang, C., and Lu, X. (2014). Earthquake relisience of a 632 m super-tall building with energy dissipation outriggers. Tenth U.S. National Conference on Earthquake Engineering, Anchorage, USA.
- Infanti, S., Robinson, J., and Smith, R. (2008). Viscous dampers for high-rise buildings. Proc. 14WCEE, Beijing, China.
- Zhou, Y. and Li, H. (2014). Analysis of a high-rise steel structure with viscous damped outriggers. Struct. Design Tall Spec. Build. 23, 963-979.
피인용 문헌
- Energy dissipation and performance assessment of double damped outriggers in tall buildings under strong earthquakes pp.15417794, 2018, https://doi.org/10.1002/tal.1554
- Advances in Structural Systems for Tall Buildings: Emerging Developments for Contemporary Urban Giants vol.8, pp.8, 2018, https://doi.org/10.3390/buildings8080104
- Distribution of strong earthquake input energy in tall buildings equipped with damped outriggers vol.27, pp.8, 2018, https://doi.org/10.1002/tal.1463