DOI QR코드

DOI QR Code

Operational modal analysis of Canton Tower by a fast frequency domain Bayesian method

  • Zhang, Feng-Liang (Research Institute of Structural Engineering and Disaster Reduction, Tongji University) ;
  • Ni, Yi-Qing (Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University) ;
  • Ni, Yan-Chun (Research Institute of Structural Engineering and Disaster Reduction, Tongji University) ;
  • Wang, You-Wu (Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University)
  • 투고 : 2015.06.11
  • 심사 : 2015.10.15
  • 발행 : 2016.02.25

초록

The Canton Tower is a high-rise slender structure with a height of 610 m. A structural health monitoring system has been instrumented on the structure, by which data is continuously monitored. This paper presents an investigation on the identified modal properties of the Canton Tower using ambient vibration data collected during a whole day (24 hours). A recently developed Fast Bayesian FFT method is utilized for operational modal analysis on the basis of the measured acceleration data. The approach views modal identification as an inference problem where probability is used as a measure for the relative plausibility of outcomes given a model of the structure and measured data. Focusing on the first several modes, the modal properties of this supertall slender structure are identified on non-overlapping time windows during the whole day under normal wind speed. With the identified modal parameters and the associated posterior uncertainty, the distribution of the modal parameters in the future is predicted and assessed. By defining the modal root-mean-square value in terms of the power spectral density of modal force identified, the identified natural frequencies and damping ratios versus the vibration amplitude are investigated with the associated posterior uncertainty considered. Meanwhile, the correlations between modal parameters and temperature, modal parameters and wind speed are studied. For comparison purpose, the frequency domain decomposition (FDD) method is also utilized to identify the modal parameters. The identified results obtained by the Bayesian method, the FDD method and a finite element model are compared and discussed.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Au, S.K. (2011), "Fast Bayesian FFT method for ambient modal identification with separated modes", J. Eng. Mech.-ASCE, 137, 214-226. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000213
  2. Au, S.K. (2012a), "Fast Bayesian ambient modal identification in the frequency domain, Part I: Posterior most probable value", Mech. Syst. Signal Pr., 26, 60-75. https://doi.org/10.1016/j.ymssp.2011.06.017
  3. Au, S.K. (2012b), "Fast Bayesian ambient modal identification in the frequency domain, Part II: posterior uncertainty", Mech. Syst. Signal Pr., 26, 76-90. https://doi.org/10.1016/j.ymssp.2011.06.019
  4. Au, S.K. (2012c), "Connecting Bayesian and frequentist quantification of parameter uncertainty in system identification", Mech. Syst. Signal Pr., 29, 328-342. https://doi.org/10.1016/j.ymssp.2012.01.010
  5. Au S.K. and Zhang F.L. (2012a), "Fast Bayesian ambient modal identification incorporating multiple setups", J. Eng.Mech.-ASCE, 138(7), 800-815. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000385
  6. Au, S.K. and Zhang, F.L. (2012b), "Ambient modal identification of a primary-secondary structure by Fast Bayesian FFT method", Mech. Syst. Signal Pr., 28, 280-296. https://doi.org/10.1016/j.ymssp.2011.07.007
  7. Au, S.K. and Zhang, F.L. (2016), "Fundamental two-stage formulation for Bayesian system identification, Part I: General theory", Mech. Syst. Signal Pr., 66-67, 31-42. https://doi.org/10.1016/j.ymssp.2015.04.025
  8. Au, S.K., Ni, Y.C., Zhang, F.L. and Lam, H.F. (2012a), "Full scale dynamic testing of a coupled slab system", Eng. Struct., 37, 167-178. https://doi.org/10.1016/j.engstruct.2011.12.024
  9. Au, S.K., Zhang, F.L. and To, P. (2012b), "Field observations on modal properties of two tall buildings under strong wind", J. Wind Eng. Ind. Aerod., 101, 12-23. https://doi.org/10.1016/j.jweia.2011.12.002
  10. Au, S.K., Zhang, F.L. and Ni, Y.C. (2013), "Bayesian operational modal analysis: theory, computation, practice", Comput. Struct., 126, 3-15. https://doi.org/10.1016/j.compstruc.2012.12.015
  11. Brincker, R., Zhang, L. and Anderson, P. (2001), "Modal identification of output-only systems using frequency domain decomposition", Smart Mater. Struct., 10, 441-455. https://doi.org/10.1088/0964-1726/10/3/303
  12. Brownjohn, J.M.W. and Pan, T.C. (2008), "Identifying loading and response mechanisms from ten years of performance monitoring of a tall building", J. Perform. Constr. Fac., 22(1), 24-34. https://doi.org/10.1061/(ASCE)0887-3828(2008)22:1(24)
  13. Brownjohn, J.M.W., Moyo, P., Omenzetter, P. and Chakraborty, S. (2005), "Lessons from monitoring the performance of highway bridge", Struct. Control Health Monit., 12, 227-244. https://doi.org/10.1002/stc.67
  14. Chang, P.C., Flatau, A. and Liu, S.C. (2003), "Health monitoring of civil infrastructure", Struct. Health Monit., 2(3), 257-267. https://doi.org/10.1177/1475921703036169
  15. Chen, H.P., Tee, K.F. and Ni, Y.Q. (2012), "Mode shape expansion with consideration of analytical modelling errors and modal measurement uncertainty", Smart Struct. Syst., 10(4-5), 485-499. https://doi.org/10.12989/sss.2012.10.4_5.485
  16. Chen, H.P. and Huang, T.L. (2012), "Updating finite element model using dynamic perturbation method and regularization algorithm", Smart Struct. Syst., 10(4-5), 427-442. https://doi.org/10.12989/sss.2012.10.4_5.427
  17. Chen, W.H., Lu, Z.R., Lin, W., Chen, S.H., Ni, Y.Q., Xia, Y. and Liao W.Y. (2011), "Theoretical and experimental modal analysis of the Guangzhou New TV Tower", Eng. Struct., 33, 3628-3646. https://doi.org/10.1016/j.engstruct.2011.07.028
  18. Katafygiotis, L.S. and Yuen, K.V. (2001), "Bayesian spectral density approach for modal updating using ambient data", Earthq. Eng. Struct. D., 30, 1103-1123. https://doi.org/10.1002/eqe.53
  19. Kijewski-Correa, T., Kwon D.K., Kareem A., Bentz A., Guo Y., Bobby A. and Abdelrazaq, A. (2013), "SmartSync: An integrated real-time structural health monitoring and structural identification system for tall buildings", J. Struct. Eng.-ASCE, 139(10), 1675-1687. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000560
  20. Ko, J.M. and Ni, Y.Q. (2005), "Technology developments in structural health monitoring of large-scale bridges", Eng. Struct., 27(12), 1715-1725. https://doi.org/10.1016/j.engstruct.2005.02.021
  21. Kuok, S.C. and Yuen, K.V. (2012), "Structural health monitoring of Canton tower using Bayesian framework", Smart Struct. Syst., 10(4-5), 375-391. https://doi.org/10.12989/sss.2012.10.4_5.375
  22. Lam, H.F., Peng, H.Y. and Au, S.K. (2014), "Development of a practical algorithm for Bayesian model updating of a coupled slab system utilizing field test data", Eng. Struct., 79, 182-194. https://doi.org/10.1016/j.engstruct.2014.08.014
  23. Lei, Y., Wang, H.F. and Shen, W.A. (2012), "Update the finite element model of Canton Tower based on direct matrix updating with incomplete modal data", Smart Struct. Syst., 10(4-5), 471-483. https://doi.org/10.12989/sss.2012.10.4_5.471
  24. Li, Q.S. and Yi, J. (2015), "Monitoring of dynamic behaviour of super-tall buildings during typhoons", Struct. Infrastruct. E., DOI: 10.1080/15732479.2015.1010223.
  25. Li, Q.S., Zhi, L.H., Tuan, A.Y., Kao, C.S., Su, S.C. and Wu, C.F. (2011), "Dynamic behavior of Taipei 101 Tower: Field measurement and numerical analysis", J. Struct. Eng.-ASCE, 137(1), 143-155. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000264
  26. Mu, H.Q. and Yuen, K.V. (2015), "Novel outlier-resistant extended Kalman filter for robust online structural identification", J. Eng. Mech.-ASCE, 141(1), CID: 04014100.
  27. Ni, Y.Q., Wong, K.Y. and Xia Y. (2011). "Health checks through landmark bridges to sky-high structures", Adv. Struct. Eng., 14(1), 103-119. https://doi.org/10.1260/1369-4332.14.1.103
  28. Ni, Y.Q., Xia, Y., Lin, W., Chen, W.H. and Ko, J.M. (2012), "SHM benchmark for high-rise structures: a reduced-order finite element model and field measurement data", Smart Struct. Syst., 10(4), 411-426. https://doi.org/10.12989/sss.2012.10.4_5.411
  29. Ni, Y.Q., Xia, Y., Liao, W.X. and Ko, J.M. (2009), "Technology innovation in developing the structural health monitoring system for Guangzhou New TV Tower", Struct. Control Health Monit., 16(1), 73-98. https://doi.org/10.1002/stc.303
  30. Ni, Y.Q., Zhang, F.L., Xia, Y.X. and Au, S.K. (2015), "Operational modal analysis of a long-span suspension bridge under different earthquake events", Earthq. Struct., 8(4), 859-887. https://doi.org/10.12989/eas.2015.8.4.859
  31. Niu Y., Kraemer P. and Fritzen C.P. (2012), "Operational modal analysis for Canton Tower", Smart Struct. Syst., 10(4-5), 393-410. https://doi.org/10.12989/sss.2012.10.4_5.393
  32. Pei, H.F., Cui, P., Yin, J.H, Zhu, H.H., Chen, X.Q., Pei, L.Z. and Xu, D.S. (2011). "Monitoring and warning of landslides and debris flows using an optical fiber sensor technology", J. Mountain Sci., 8(5), 728-738. https://doi.org/10.1007/s11629-011-2038-2
  33. Pei, H.F., Yin, J.H., Zhu, H.H, Hong, C.Y., Jin, W. and Xu, D.S. (2012), "Monitoring of lateral displacements of a slope using a series of special fibre Bragg grating-based in-place inclinometers", Measurement Sci. Technol., 23(2), 1-8.
  34. Peeters, B. and De Roeck, G. (2001), "Stochastic system identification for operational modal analysis: a review". Journal of Dynamic Systems", Measurement Control, ASME, 123(4), 659-667. https://doi.org/10.1115/1.1410370
  35. Schoukens, J. and Pintelon, R. (1991), Identification of Linear Systems: A Practical Guideline for Accurate Modelling, London: Pergamon Press.
  36. Shi, W.X., Shan J.Z. and Lu, X.L. (2012), "Modal identification of Shanghai World Financial Center both from free and ambient vibration response", Eng. Struct., 36, 14-26 https://doi.org/10.1016/j.engstruct.2011.11.025
  37. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler B.R. (2003), A Review of Structural Health Monitoring Literature: 1996-2001, Los Alamos National Laboratory Report, LA-13976-MS.
  38. Su, J.Z., Xia, Y., Chen, L., Zhao, X., Zhang, Q.L., Xu, Y.L., Ding, J.M., Xiong, H.B. and Ma, R.J. (2013), "Long-term structural performance monitoring system for the Shanghai Tower", J. Civil Struct. Health Monit., 3, 49-61. https://doi.org/10.1007/s13349-012-0034-z
  39. Yuen, K.V. (2010), Bayesian methods for structural dynamics and civil engineering, Wiley, New York.
  40. Yuen, K.V. and Mu, H.Q. (2012), "A novel probabilistic method for robust parametric identification and outlier detection", Probabilist. Eng. Mech., 30, 48-59. https://doi.org/10.1016/j.probengmech.2012.06.002
  41. Yuen, K.V. and Katafygiotis, L.S. (2001), "Bayesian time-domain approach for modal updating using ambient data", Probabilist. Eng. Mech., 16(3), 219-231. https://doi.org/10.1016/S0266-8920(01)00004-2
  42. Yuen, K.V. and Katafygiotis, L.S. (2003), "Bayesian fast fourier transform approach for modal updating using ambient data", Adv. Struct. Eng., 6(2), 81-95. https://doi.org/10.1260/136943303769013183
  43. Yuen, K.V. and Katafygiotis, L.S. (2005), "Model updating using response measurements without knowledge of the input spectrum", Earthq. Eng. Struct. D., 34(2), 167-187. https://doi.org/10.1002/eqe.415
  44. Yuen, K.V. and Kuok, S.C. (2010), "Ambient interference in long-term monitoring of buildings", Eng. Struct., 32, 2379-2386. https://doi.org/10.1016/j.engstruct.2010.04.012
  45. Zhang, F.L. and Au, S.K. (2013), "Erratum for fast Bayesian FFT method for ambient modal identification with separated modes by Siu-Kui Au", J. Eng. Mech.-ASCE, 139, 545-545. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000501
  46. Zhang, F.L. and Au, S.K. (2015), "A probabilistic model for modal properties based on operational modal analysis", ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, http://dx.doi.org/10.1061/AJRUA6.0000843.B4015005..
  47. Zhang, F.L. and Au, S.K. (2016), "Fundamental two-stage formulation for Bayesian system identification, Part II: Application to ambient vibration data", Mech. Syst. Signal Pr., 66-67, 43-61. https://doi.org/10.1016/j.ymssp.2015.04.024

피인용 문헌

  1. Operational modal identification of a boat-shaped building by a Bayesian approach vol.138, 2017, https://doi.org/10.1016/j.engstruct.2017.02.003
  2. Mode identifiability of a cable-stayed bridge based on a Bayesian method vol.17, pp.3, 2016, https://doi.org/10.12989/sss.2016.17.3.471
  3. Operational modal identification and finite element model updating of a coupled building following Bayesian approach vol.25, pp.2, 2018, https://doi.org/10.1002/stc.2089
  4. Markov chain Monte Carlo-based Bayesian method for structural model updating and damage detection 2018, https://doi.org/10.1002/stc.2140
  5. Bayesian structural model updating using ambient vibration data collected by multiple setups vol.24, pp.12, 2017, https://doi.org/10.1002/stc.2023
  6. Evaluation of the dynamic characteristics of a super tall building using data from ambient vibration and shake table tests by a Bayesian approach 2017, https://doi.org/10.1002/stc.2121
  7. Operational modal analysis of a high-rise multi-function building with dampers by a Bayesian approach vol.86, 2017, https://doi.org/10.1016/j.ymssp.2016.10.009
  8. Probabilistic assessment of vibration exceedance for a full-scale tall building under typhoon conditions vol.27, pp.15, 2018, https://doi.org/10.1002/tal.1516
  9. Modal testing and detection of pretension deviation in a cable dome structure pp.2048-4011, 2018, https://doi.org/10.1177/1369433218789197
  10. Inclinometer-based method to monitor displacement of high-rise buildings vol.5, pp.1, 2016, https://doi.org/10.12989/smm.2018.5.1.111
  11. Online condition assessment of high-speed trains based on Bayesian forecasting approach and time series analysis vol.21, pp.5, 2016, https://doi.org/10.12989/sss.2018.21.5.705
  12. Enhanced least square complex frequency method for operational modal analysis of noisy data vol.15, pp.3, 2016, https://doi.org/10.12989/eas.2018.15.3.263
  13. Investigation of the SHM-oriented model and dynamic characteristics of a super-tall building vol.23, pp.3, 2019, https://doi.org/10.12989/sss.2019.23.3.295
  14. Vibration properties monitoring and uncertainty quantification of precast and cast‐in‐situ shear wall buildings using a Bayesian framework vol.27, pp.6, 2016, https://doi.org/10.1002/stc.2537
  15. Analysis of Environmental and Typhoon Effects on Modal Frequencies of a Power Transmission Tower vol.20, pp.18, 2016, https://doi.org/10.3390/s20185169
  16. Automatic identification of modal parameters for structures based on an uncertainty diagram and a convolutional neural network vol.28, pp.None, 2016, https://doi.org/10.1016/j.istruc.2020.08.077
  17. Dynamic response reconstruction for structural health monitoring using densely connected convolutional networks vol.20, pp.4, 2016, https://doi.org/10.1177/1475921720916881
  18. Propagative broad learning for nonparametric modeling of ambient effects on structural health indicators vol.20, pp.4, 2016, https://doi.org/10.1177/1475921720916923
  19. Capacity Curve Estimation for High-Rise Buildings Using Limited Number of Sensors vol.25, pp.8, 2021, https://doi.org/10.1080/13632469.2019.1592792
  20. Monitoring of wind effects on a wind-sensitive hybrid structure with single-layer cable-net curtain walls under Typhoon Muifa vol.44, pp.None, 2021, https://doi.org/10.1016/j.jobe.2021.102960
  21. Field monitoring and prediction on temperature distribution of glass curtain walls of a super high-rise building vol.250, pp.None, 2022, https://doi.org/10.1016/j.engstruct.2021.113405