References
- AASHTO. (2004). A policy on geometric design of highways and streets. AASHTO 2004, Washington, DC.
- Abdel-Jawad, Y. A. (2006). Estimating concrete strength using a modified maturity model. Proceedings of the Institution of Civil Engineers, Construction Materials, 159, 33-37.
- ACI 517.2-2R-87. (1992). Accelerated curing of concrete at atmospheric pressure-state of the art., Farmington Hills, MI.
- (2008). Building code requirements for structural concrete and commentary, Farmington Hills, MI.
- Alexander, K. M., & Taplin, J. H. (1962). Concrete strength, paste strength, cement hydration and the maturity rule. Australian Journal of Applied Science, 13(4), 277-284.
- Alexanderson, J. (1972). Strength losses in heat cured concrete. Swedish Cement Concrete Inst Procc.
- Arrhenius, S. (1889). Uber die reaktionsgeschwindigkeitbei der inversion von rohrzuckerdurchsauren. Zeitschrift fur Physikalische Chemie, 4, 226-248.
- ASTM C1074-04. (2004) Standard Practice for Estimating Concrete Strength by the Maturity Method, West Conshohocken, PA.
- ASTM C143/C143M-10. (2010). Standard test method for slump of hydraulic-cement concrete. West Conshohocken, PA.
- ASTM C231/231M-14 (2014). Standard test method for air content of freshly mixed concrete by the pressure method, West Conshohocken, PA.
- ASTM C39/C39M-14. (2014). Standard test method for compressive strength of cylindrical concrete specimens, West Conshohocken, PA.
- Bernhardt, C. J. (1956). Hardening of concrete at different temperatures. RILEM Symposium on Winter Concreting, Copenhagen, Danish, Institute for Building Research, Session B-II.
- Carino, N. J. (1984). Maturity method: Theory and application. Journal of Cement Concrete and Aggregates, 6(2), 61-73. https://doi.org/10.1520/CCA10358J
- Carino, N. J., & Lew, H. S. (1983). Temperature effects on the strength-maturity relations of mortars. ACI Journal, 80(3), 177-182.
- Carino, N. J., & Tank, R. C. (1992). Maturity functions for concretes made with various cements and admixtures. ACI Materials Journal, 89(2), 188-196.
- CSA (Canadian Standards Association). (2014). Precast concrete-materials and construction. CSA-A23.4-09, Toronto, Canada.
- Erdem, T. K., Turanli, L., & Erdogan, T. Y. (2003). Setting time: an important criterion to determine the length of the delay period before steam curing of concrete. Cement and Concrete Research, 33(5), 741-745. https://doi.org/10.1016/S0008-8846(02)01058-X
- Erdogdu, S., & Kurbetci, S. (1998). Optimum heat treatment cycle for cements of different type and composition. Cement and Concrete Research, 28(11), 1595-1604. https://doi.org/10.1016/S0008-8846(98)00134-3
- Freiesleben, H. P., & Pedersen, E. J. (1977). Maturity computer for controlled curing and hardening of concrete. Nordisk Betong, 1(19), 21-25.
- Hanson, J. A. (1963). Optimum steam curing procedure in precasting plants. ACI Journal, 60(1), 75-100.
- Higginson, E. C. (1961). Effect of steam curing on the important properties of concrete. ACI Journal, 58(9), 281-298.
- Jonasson, J. E., Groth, P. & Hedlund, H. (1995). Modeling of temperature and moisture field in concrete to study early age movements as a basis for stress analysis. In Proceedings of the international RILEM symposium on thermal cracking in concrete at early ages (pp. 45-52).
- Kim, J. K., Han, S. H., & Lee, K. W. (2001). Estimation of compressive strength by a new apparent activation energy function. Cement and Concrete Research, 31(2), 1761-1773.
- Kjellsen, K. O., & Detwiler, R. J. (1993). Later-age strength prediction by a modified maturity model. ACI Materials Journal, 90(3), 220-227.
- Kjellsen, K. O., Detwiler, R. J., & Gjorv, O. E. (1990). Pore structure of plain cement pastes hydrated at different temperatures. Cement and Concrete Research, 20(6), 927-933. https://doi.org/10.1016/0008-8846(90)90055-3
- Kwon, S. H., Jang, K. P., Bang, J. W., Lee, J. H., & Kim, Y. Y. (2014). Prediction of concrete compressive strength considering humidity and temperature in construction of nuclear power plants. Nuclear Engineering and Design, 275, 23-29. https://doi.org/10.1016/j.nucengdes.2014.04.025
- Liao, W. C., Lee, B. J., & Kang, C. W. (2008). A humidity-adjusted maturity function for the early age strength prediction of concrete. Cement & Concrete Composites, 30, 515-523. https://doi.org/10.1016/j.cemconcomp.2008.02.006
- McIntosh, J. D. (1956). The effects of low-temperature curing on the compressive strength of concrete. RILEM Symposium on Winter Concreting, Copenhagen, Danish, Institute for Building Research, Session BII.
- Moon, Y. H. (1999). Prediction of concrete strength with different curing temperature and time. Ph.D. Dessertation of Korea Advanced Institute of Science and Technology, Daejeon, Korea.
- Oztekin, E. (1984). Determination of heat treatment cycle for cements. Association Cement Bulletin, 206(3), 24-26.
- Poole, J. L. (2006). Modeling temperature sensitivity and heat evolution of concrete. Ph.D. Dissertation of University of Texas at Austin, TX.
- Ramezanianpour, A. A., Khazali, M. H., & Vosoughi, P. (2013). Effect of steam curing cycles on strength and durability of SCC: A case study in precast concrete. Construction and Building Materials, 49, 807-813. https://doi.org/10.1016/j.conbuildmat.2013.08.040
- Schindler, A. K. (2004). Effect of temperature on hydration of cementitious materials. ACI Materials Journal, 101(1), 72-81.
- Schindler, A. K., & Folliard, K. J. (2005). Heat of hydration models for cementitious materials. ACI Material Journal, 102, 24-33.
- Tank, R. C., & Carino, N. J. (1991). Rate constant functions for strength development of concrete. ACI Materials Journal, 88(1), 74-83.
- Yang, K. H., Mun, J. S., Kim, D. G., & Cho, M. S. (2016). Comparison of strength-maturity models accounting for hydration heat in massive walls. International Journal of Concrete Structures and Materials, 10(1), 47-60. https://doi.org/10.1007/s40069-016-0128-9
- Yi, S. T., Moon, Y. H., & Kim, J. K. (2005). Long-term strength prediction of concrete with curing temperature. Cement and Concrete Research, 35(10), 1961-1969. https://doi.org/10.1016/j.cemconres.2005.06.010
Cited by
- Experimental and Numerical Assessment of the Service Behaviour of an Innovative Long-Span Precast Roof Element vol.11, pp.2, 2016, https://doi.org/10.1007/s40069-017-0187-6
- Crossover Effect in Cement-Based Materials: A Review vol.9, pp.14, 2016, https://doi.org/10.3390/app9142776
- Preliminary studies on calcinated chicken eggshells as fine aggregates replacement in conventional concrete vol.31, pp.p1, 2016, https://doi.org/10.1016/j.matpr.2020.06.232
- Early-Age Cracking Analysis of a HVFA Concrete Structure Based on Thermo-Hygro-Mechanical Modeling Combined with XFEM vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/5793902
- Numerical Search of the Optimum Curing Regimes for High-Early-Strength Concrete vol.32, pp.4, 2020, https://doi.org/10.1061/(asce)mt.1943-5533.0003144
- Impact of elevated curing temperature on mechanical properties and microstructure of MgO‐based expansive additive cement mortars vol.21, pp.3, 2016, https://doi.org/10.1002/suco.201900127
- Fracture Properties of Concrete in Dry Environments with Different Curing Temperatures vol.10, pp.14, 2016, https://doi.org/10.3390/app10144734
- Mechanical behavior and constitutive model of shotcrete–rock interface subjected to heat damage and variable temperature curing conditions vol.263, pp.None, 2016, https://doi.org/10.1016/j.conbuildmat.2020.120171
- Temperature and age effects on mechanical behaviour of phosphorus slag-based concrete vol.33, pp.3, 2021, https://doi.org/10.1680/jadcr.18.00230
- An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites vol.14, pp.11, 2016, https://doi.org/10.3390/ma14112950
- The Influence of Temperature on the Hydration Rate of Cements Based on Calorimetric Measurements vol.14, pp.11, 2016, https://doi.org/10.3390/ma14113025
- The Influence of Cement Substitution by Biomass Fly Ash on the Polymer-Cement Composites Properties vol.14, pp.11, 2016, https://doi.org/10.3390/ma14113079
- Synthesis and characterisation of Portland cement clinker by exploiting waste oyster shells and alumina sludge vol.25, pp.13, 2016, https://doi.org/10.1080/19648189.2019.1632227
- The early-age prediction of concrete strength using maturity models: a review vol.6, pp.1, 2016, https://doi.org/10.1007/s41024-020-00102-1
- Ultra-high-performance concrete: Constituents, mechanical properties, applications and current challenges vol.15, pp.None, 2016, https://doi.org/10.1016/j.cscm.2021.e00559