DOI QR코드

DOI QR Code

Experimental Verification of Resistance-Demand Approach for Shear of HSC Beams

  • El-Sayed, Ahmed K. (Department of Civil Engineering, Center of Excellence for Concrete Research and Testing, King Saud University) ;
  • Shuraim, Ahmed B. (Department of Civil Engineering, King Saud University)
  • Received : 2016.02.10
  • Accepted : 2016.08.14
  • Published : 2016.12.30

Abstract

The resistance-demand approach has emerged as an effective approach for determining the shear capacity of reinforced concrete beams. This approach is based on the fact that both the shear resistance and shear demand are correlated with flexural tensile strain from compatibility and equilibrium requirements. The basic shear strength, under a given loading is determined from the intersection of the demand and resistance curves. This paper verifies the applicability of resistance-demand procedure for predicting the shear capacity of high strength concrete beams without web reinforcement. A total of 18 beams were constructed and tested in four-point bending up to failure. The test variables included the longitudinal reinforcement ratio, the shear span to depth ratio, and the beam depth. The shear capacity of the beams was predicted using the proposed procedure and compared with the experimental values. The results of the comparison showed good prediction capability and can be useful to design practice.

Keywords

References

  1. AASHTO. (2008). AASHTO LRFD Bridge design specifications, American Association of State Highway and Transportation Officials.
  2. ACI Committee 318. (2014). Building code requirements for structural concrete and commentary. ACI 318-14/ACI 318R-14, American Concrete Institute, Farmington Hills, MI, 519 pp.
  3. CAN/CSA S806-12. (2012). Design and construction of building components with fibre reinforced polymers. Canadian Standards Association, Rexdale, Canada, 187 pp.
  4. CAN/CSA-A23.3-04. (2004). Design of concrete structures. Canadian Standards Association, Rexdale, Canada, 240 pp.
  5. El-Sayed, A. K., El-Salakawy, E., & Benmokrane, B. (2006). Shear capacity of high-strength concrete beams reinforced with FRP bars. ACI Structural Journal, 103(3), 383-389.
  6. Eurocode 2. (2004). Design of concrete structures, Part 1-1: General rules and rules for buildings. European Committee for Standardization, Brussels, Belgium, 230 pp.
  7. Harkouss, R. H., & Hamad, B. S. (2015). Performance of high strength self-compacting concrete beams under different modes of failure. International Journal of Concrete Structures and Materials, 9(1), 69-88. https://doi.org/10.1007/s40069-014-0088-x
  8. Jeong, J. P., & Kim, W. (2014). Shear resistant mechanism into base components: Beam action and arch action in shearcritical RC members. International Journal of Concrete Structures and Materials, 8(1), 1-14. https://doi.org/10.1007/s40069-013-0064-x
  9. Joint ACI-ASCE Committee 445 (Reapproved 2009). Recent approaches to shear design of structural concrete, ACI Manual of Concrete Practice, American Concrete Institute, Farmington Hills, MI, 56 pp.
  10. Kim, J. K., & Park, Y. D. (1996). Prediction of shear strength of reinforced concrete beams without web reinforcement. ACI Materials Journal, 93(3), 213-222.
  11. Muttoni, A., & Ruiz, M. F. (2008). Shear strength of members without transverse reinforcement as function of critical shear crack width. ACI Structural Journal, 105(2), 163-172.
  12. Okamura, H., & Higai, T. (1980). Proposed design equation for shear strength of RC Beams without web reinforcement. Proceedings, Japan Society of Civil Engineering, 300, 131-141.
  13. Park, H. G., Choi, K. K., & Wight, J. K. (2006). Strain-based shear strength model for slender beams without web reinforcement. ACI Structural Journal, 103(6), 783-793.
  14. Rebeiz, K. S. (1999). Shear strength prediction for concrete members. Journal of Structural Engineering, ASCE, 125(3), 301-308. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(301)
  15. Shuraim, A. B. (2014). A novel approach for evaluating the concrete shear strength in reinforced concrete beams. Latin American Journal of Solids and Structures, 11(1), 93-112. https://doi.org/10.1590/S1679-78252014000100006
  16. Tureyen, A. K., & Frosch, R. J. (2003). Concrete shear strength: Another perspective. ACI Structural Journal, 100(5), 609-615.
  17. Vecchio, F. J., & Collins, M. P. (1986). The modified compression field theory for reinforced concrete elements subjected to shear. ACI Journal, 83(2), 219-231.
  18. Zararis, P. D.,&Papadakis, G. (2001). Diagonal shear failure and size effect in RC beams without web reinforcement. Journal of Structural Engineering, ASCE, 127(7), 733-742. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(733)
  19. Zsutty, T. C. (1968). Beam shear strength prediction by analysis of existing data. ACI Journal, 65(11), 943-951.

Cited by

  1. Single Web Shear Element Model for Shear Strength of RC Beams with Stirrups vol.12, pp.1, 2016, https://doi.org/10.1186/s40069-018-0252-9