DOI QR코드

DOI QR Code

Shear Crack Control for High Strength Reinforced Concrete Beams Considering the Effect of Shear-Span to Depth Ratio of Member

  • Chiu, Chien-Kuo (Department of Civil and Construction Engineering, National Taiwan University of Science and Technology) ;
  • Ueda, Takao (Department of Civil and Environmental Engineering, Tokushima University) ;
  • Chi, Kai-Ning (Department of Civil and Construction Engineering, National Taiwan University of Science and Technology) ;
  • Chen, Shao-Qian (Department of Civil and Construction Engineering, National Taiwan University of Science and Technology)
  • 투고 : 2015.12.11
  • 심사 : 2016.06.30
  • 발행 : 2016.12.30

초록

This study tests ten full-size simple-supported beam specimens with the high-strength reinforcing steel bars (SD685 and SD785) using the four-point loading. The measured compressive strength of the concrete is in the range of 70-100 MPa. The main variable considered in the study is the shear-span to depth ratio. Based on the experimental data that include maximum shear crack width, residual shear crack width, angle of the main crack and shear drift ratio, a simplified equation are proposed to predict the shear deformation of the high-strength reinforced concrete (HSRC) beam member. Besides the post-earthquake damage assessment, these results can also be used to build the performance-based design for HSRC structures. And using the allowable shear stress at the peak maximum shear crack width of 0.4 and 1.0 mm to suggest the design formulas that can ensure service-ability (long-term loading) and reparability (short-term loading) for shear-critical HSRC beam members.

키워드

참고문헌

  1. ACI. (2010). Report on high-strength concrete. ACI Committee 363. Farmington Hills, MI: American Concrete Institute.
  2. ACI. (2011). Building code requirements for structural concrete. ACI Committee 318. Farmington Hills, MI: American Concrete Institute.
  3. AIJ. (1999). Design guidelines for earthquake resistant reinforced concrete buildings based on inelastic displacement concept. Tokyo, Japan: Architectural Institute of Japan. (in Japanese).
  4. AIJ. (2010). Standard for structural calculation of reinforced concrete structures. Tokyo, Japan: Architectural Institute of Japan.
  5. Chiu, C. K., Chi, K. N., & Lin, F. C. (2014). Experimental investigation on the shear crack development of shearcritical high-strength reinforced concrete beams. Journal of Advanced Concrete Technology, 12(7), 223-238. https://doi.org/10.3151/jact.12.223
  6. FIP/CEB. (1990). High strength concrete, State of the art report. Bulletin d'Information No. 197, August 1990.
  7. JSCE. (2007). Standard specifications for concrete structure "design". Tokyo, Japan: Japan Society of Civil Engineers.
  8. Maeda, M., & Kang, D. E. (2009). Post-earthquake damage evaluation for reinforced concrete buildings. Journal of Advanced Concrete Technology, 7(3), 327-335. https://doi.org/10.3151/jact.7.327
  9. Nakano, Y., Maeda, M., Kuramoto, H., & Murakami, M. (2004). Guideline for post-earthquake damage evaluation and rehabilitation of RC buildings in Japan. In 13th World Conference on Earthquake Engineering, Vancouver, Canada (Paper No. 124).
  10. Shimazaki, K. (2009). Evaluation of shear crack width based on shear force ratio. AIJ Journal of Technology and Design, 15(29), 139-142. (in Japanese). https://doi.org/10.3130/aijt.15.139
  11. Silva, S. D., Mutsuyoshi, H., & Witchukreangkrai, E. (2008). Evaluation of shear crack width in I-shaped prestressed reinforced concrete beams. Journal of Advanced Concrete Technology, 6(3), 443-458. https://doi.org/10.3151/jact.6.443
  12. Soltani, A., Harries, K. A., & Shahrooz, B. M. (2013). Crack opening behavior of concrete reinforced with high strength reinforcing steel. International Journal of Concrete Structures and Materials, 7(4), 253-264. https://doi.org/10.1007/s40069-013-0054-z
  13. Zakaria, M., Ueda, T., Wu, Z., & Liang, M. (2009). Experimental investigation on shear cracking behavior in reinforced concrete beams with shear reinforcement. Journal of Advanced Concrete Technology, 7(1), 79-96. https://doi.org/10.3151/jact.7.79

피인용 문헌

  1. Structural Behavior of RC Beams Containing a Pre- Diagonal Tension Crack vol.15, pp.7, 2016, https://doi.org/10.1590/1679-78254701
  2. Single Web Shear Element Model for Shear Strength of RC Beams with Stirrups vol.12, pp.1, 2016, https://doi.org/10.1186/s40069-018-0252-9
  3. Experimental and Numerical Assessment of Reinforced Concrete Beams with Disturbed Depth vol.13, pp.1, 2019, https://doi.org/10.1186/s40069-019-0369-5
  4. Experimental Study on the Behavior of Steel-Concrete Composite Decks with Different Shear Span-to-Depth Ratios vol.11, pp.12, 2016, https://doi.org/10.3390/buildings11120624