International Journal of Concrete Structures and Materials

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Review of Design Flexural Strengths of Steel-Concrete Composite Beams for Building Structures

  • Chung, Lan (Department of Architectural Engineering, Dankook University) ;
  • Lim, Jong-Jin (Department of Architectural Engineering, Dankook University) ;
  • Hwang, Hyeon-Jong (College of Civil Engineering, Hunan University) ;
  • Eom, Tae-Sung (Department of Architectural Engineering, Dankook University)
  • Received : 2016.03.21
  • Accepted : 2016.05.01
  • Published : 2016.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, as the use of high-performance materials and complex composite methods has increased, the need for advanced design specifications for steel-concrete composite structures has grown. In this study, various design provisions for ultimate flexural strengths of composite beams were reviewed. Design provisions reviewed included the load and resistance factor design method of AISC 360-10 and the partial factor methods of KSSC-KCI, Eurocode 4 and JSCE 2009. The design moment strengths of composite beams were calculated according to each design specification and the variation of the calculated strengths with design variables was investigated. Furthermore, the relationships between the deformation capacity and resistance factor for flexure were examined quantitatively. Results showed that the design strength and resistance factor for flexure of composite beams were substantially affected by the design formats and variables.

Keywords

References

  1. American Association of State Highway and Transportation Officials. (2012). AASHTO LRFD specifications (6th ed.). Washington DC.
  2. American Institute of Steel Construction. (2010). Specifications for structural steel buildings, AISC 360-10, Chicago, IL.
  3. Architectural Institute of Korea. (2014). Korea Building Codes (Draft), KBC 2014, Seoul (in Korean).
  4. European Committee for Standardization. (2004a). Eurocode 4: Design of composite steel and concrete structures, Part 1-1: General rules and rules for buildings, EN 1994-1-1:2004.
  5. European Committee for Standardization. (2004b). Eurocode 2: Design of concrete structures-Part 1-1: General rules and rules for buildings, EN 1992-1-1:2004.
  6. Japan Society of Civil Engineers. (2007). Standard specifications for concrete structures-2007-''Design'', JSCE Guidelines for Concrete No. 15
  7. Japan Society of Civil Engineers. (2009). Standard specifications for steel and composite structures.
  8. Kim, D. H., Kim, J. H., & Chang, S. K. (2014). Material performance evaluation and super-tall building applicability of the 800 MPa high-strength steel plates for building structures. International Journal of Steel Structures, 14(4), 889-900. https://doi.org/10.1007/s13296-014-1219-6
  9. Kim, T. S., Lee, M. J., Suk, O. Y., Lee, K. M., & Kim, D. H. (2012a). A study on compressive strength of built-up H-shaped columns fabricated with HSA800 high performance steels. Journal of the Korean Society of Steel Construction, KSSC, 24(6), 627-636. (in Korean). https://doi.org/10.7781/kjoss.2012.24.6.627
  10. Kim, C. S., Park, H. G., Chung, K. S., & Choi, I. R. (2012b). Eccentric axial load testing for concrete-encased steel columns using 800 MPa steel and 100 MPa concrete. Journal of Structural Engineering, 138(8), 1019-1031. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000533
  11. KSSC-KCI Joint Composite Structure Committee. (2014). Design codes of composite structures (Draft). Seoul, korea: Korean Society of Steel Construction. (in Korean).
  12. Lee, C. H., Han, K. H., Kim, D. K., Park, C. H., Kim, J. H., Lee, S. E., & Ha, T. H. (2012). Local buckling and inelastic behavior of 800 MPa high-strength steel beams. Journal of Korean Society of Steel Construction, KSSC, 24(4), 479-490. (in Korean). https://doi.org/10.7781/kjoss.2012.24.4.479
  13. Lee, C. H., Han, K. H., Uang, C. H., Kim, D. K., Park, C. H., & Kim, J. H. (2013a). Flexural strength and rotation capacity of I-shaped beams fabricated from 800-MPa. Journal of Structural Engineering, ASCE, 139(6), 1043-1058. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000727
  14. Lee, C. H., Kang, K. Y., Kim, S. Y., & Koo, C. H. (2013b). Review of structural design provisions of rectangular concrete filled tubular columns. Journal of the Korean Society of Steel Construction, KSSC, 25(4), 389-398. (in Korean). https://doi.org/10.7781/kjoss.2013.25.4.389
  15. Lee, C. H., Kim, D. K., Han, K. H., Park, C. H., Kim, J. H., Lee, S. E., & Kim, D. H. (2013c). Tensile testing of groove welded joints joining thick-HSA800 plates. Journal of the Korean Society of Steel Construction, KSSC, 25(4), 431-440. (in Korean). https://doi.org/10.7781/kjoss.2013.25.4.431
  16. Lee, M. J., Kim, C. W., & Kim, H. D. (2014). The evaluation of the axial strength of composite column with HSA800 grade steel. Journal of the Korean Society of Steel Construction, KSSC, 24(6), 627-636. (in Korean).
  17. Wittry, D.M. (1993). An analysis study of the ductility of steelconcrete composite sections, MS Thesis, University of Texas, Austin, TX.
  18. Youn, S. G. (2013a). Nominal moment capacity of hybrid composite sections using HSB600 high-performance steel. International Journal of Steel Structures, KSSC, 13(2), 243-252. https://doi.org/10.1007/s13296-013-2004-7
  19. Youn, S. K. (2013b). Reevaluation of nominal flexural strength of composite girders in positive bending region. Journal of the Korean Society of Steel Construction, 25(2), 165-178. (in Korean). https://doi.org/10.7781/kjoss.2013.25.2.165

Cited by

  1. The calculation of anchors in steel-concrete overlaps with precast slab vol.97, pp.None, 2016, https://doi.org/10.1051/e3sconf/20199706022