International Journal of Concrete Structures and Materials

한국콘크리트학회 (Korea Concrete Institute)
권호 표지
DOI QR코드

DOI QR Code

Structural Performance Evaluation of a Precast PSC Curved Girder Bridge Constructed Using Multi-Tasking Formwork

  • Kim, Sung-Jae (School of Civil and Environmental Engineering, Yonsei University) ;
  • Kim, Jang-Ho Jay (School of Civil and Environmental Engineering, Yonsei University) ;
  • Yi, Seong-Tae (Department of Civil and Environmental Engineering, Inha Technical College) ;
  • Noor, Norhazilan Bin Md (Department of Structures and Materials, Faculty of Civil Engineering, Universiti Teknologi Malaysia) ;
  • Kim, Sung-Chul (School of Civil and Environmental Engineering, Yonsei University)
  • 투고 : 2016.03.28
  • 심사 : 2016.06.23
  • 발행 : 2016.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, advanced transit systems are being constructed to reduce traffic congestions in metropolitan areas. For these projects, curved bridges with various curvatures are required. Many curved bridges in the past were constructed using aesthetically unpleasant straight beams with curved slabs or expensive curved steel box girders with curved slabs. Therefore, many recent studies have been performed to develop less expensive and very safe precast prestressed concrete (PSC) curved girder. One method of reducing the construction cost of a PSC curved girder is to use a reusable formwork that can easily be adjusted to change the curvature and length of a girder. A reusable and curvature/dimension adjustable formwork called Multi-tasking formwork is developed for constructing efficient precast PSC curved girders. With the Multi-tasking formwork, two 40 m precast PSC box girders with different curvatures were constructed to build a two-girder curved bridge for a static flexural test to evaluate its safety and serviceability performance. The static flexural test results showed that the initial cracking load was 1400 kN, exceeding the design cracking load of 450 kN. Also, the code allowed deflection of 50 mm occurred at a load of 1800 kN, verifying the safety and serviceability of the precast PSC curved bridge constructed using the multi-tasking formwork.

키워드

참고문헌

  1. Amorn, W., Tuan, C. Y., & Tadros, M. K. (2008). Curved, precast, pretensioned concrete I-girder bridges. PCI Journal, 53(6), 48-66. https://doi.org/10.15554/pcij.11012008.48.66
  2. Dong, J., & Sause, R. (2010). Behavior of hollow tubular-flange girder systems for curved bridges. Journal of Structural Engineering, 136(2), 174-182. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000092
  3. Lin, W., & Yoda, T. (2010). Analysis, design and construction of curved composite girder bridges: State-of-the-art. International Journal of Steel Structures, 10(3), 207-220. https://doi.org/10.1007/BF03215831
  4. Linzell, D. G., Leon, R. T., & Zureick, A. H. (2004). Experimental and analytical studies of a horizontally curved steel I-girder bridge during erection. Journal of Bridge Engineering, 9(6), 521-530. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:6(521)
  5. Mansur, M. A., & Rangan, B. V. (1981). Study of design methods for reinforced concrete curved beams. ACI Journal, 78(21), 226-254.
  6. McElwain, B. A., & Laman, J. A. (2000). Experimental veri- fication of horizontally curved I-girder bridge behavior. Journal of Bridge Engineering, 5(4), 284-292. https://doi.org/10.1061/(ASCE)1084-0702(2000)5:4(284)
  7. Morris, D. L. (1968). Curved beam stiffness coefficients. American Society of Civil Engineering, 94, 1165-1174.
  8. Nakai, H., & Yoo, C. H. (1988). Analysis and design of horizontally curved steel bridges. New York, NY: McGraw-Hill.
  9. Schmitt, W. (1966). "Interchange utilizes arcwelded horizontally curved span.'' unpublished paper submitted to Lincoln Arc Welding Foundation.
  10. Sennah, K. M., & Kennedy, J. B. (2001). Sate-of the-art in design of curved box-girder bridges. Journal of Bridge Engineering, 6(3), 159-167. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:3(159)
  11. Spyropoulos, P. J. (1963). Circularly curved beams transversely loaded. ACI Journal, 60(10), 1457-1468.
  12. Suros, O., & Chu, H. Y. (1991). Reducing airport congestion. Modern Steel Construction, 31(6), 21-25.
  13. Takoya, C., & Willaims, E. B. (2003). Development of computational software for analysis of curved girder under construction loads. Computer and Structures, 81(21), 2087-2098. https://doi.org/10.1016/S0045-7949(03)00258-X
  14. Vlasov, V. Z. (1946). Thin-walled elastic beam. Washington, D.C: National Science Foundation.
  15. Yoo, C. H., Donald, R. E., & Conrad, P. H. (1974). Non-prismatic curved girder analysis. Computer and Structures, 4(3), 675-698. https://doi.org/10.1016/0045-7949(74)90014-5
  16. Zhang, H. L., Huang, D. Z., & Wang, T. L. (2005). Lateral load distribution in curved steel I-bridges. Journal of Bridge Engineering, 10(3), 281-290. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:3(281)
  17. Zureick, A., & Naqib, R. (1999). Horizontally curved steel I-girders state-of-the-art analysis methods. Journal of Bridge Engineering, 4(1), 38-47. https://doi.org/10.1061/(ASCE)1084-0702(1999)4:1(38)

피인용 문헌

  1. Effect of load cycling on plastic hinge length in RC columns vol.147, pp.None, 2016, https://doi.org/10.1016/j.engstruct.2017.05.046
  2. Modeling of Bond Stress–Slip Relationships of a Strand in Concrete during Steam Curing vol.11, pp.3, 2016, https://doi.org/10.1007/s40069-017-0210-y
  3. Experimental and Analytical Studies of U-Shaped Thin-Walled RC Beams Under Combined Actions of Torsion, Flexure and Shear vol.12, pp.1, 2016, https://doi.org/10.1186/s40069-018-0245-8
  4. RC Arch Deck Development and Performance Evaluation for Enhanced Deck Width vol.12, pp.1, 2016, https://doi.org/10.1186/s40069-018-0295-y