DOI QR코드

DOI QR Code

Effect of fiber geometry on the electromagnetic shielding performance of mortar

  • Kim, Young Jun (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Yemam, Dinberu M. (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Kim, Baek-Joong (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Yi, Chongku (School of Civil, Environmental and Architectural Engineering, Korea University)
  • 투고 : 2015.10.30
  • 심사 : 2015.12.03
  • 발행 : 2016.02.25

초록

The increased awareness of electromagnetic wave hazards has prompted studies on electromagnetic shielding using conductive materials in the construction industry. Previous studies have explored the effects of the types of conductive materials and their mix proportions on the electromagnetic shielding performance; however, there has been insufficient research on the effect of the geometry of the conductive materials on the electromagnetic shielding performance. Therefore, in this study, the dependence of the electromagnetic shielding performance on the cross-sectional geometry, diameter and length of fibers was investigated. The results showed that the electromagnetic shielding performance improved when the fiber length increased or the diameter decreased, but the effect of the cross-sectional geometry of the fibers was smaller than the effect of the fiber spacing factor.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF), Korea Institute of Energy Technology Evaluation and Planning(KETEP)

참고문헌

  1. Albano, C., Camacho, N., Reyes, J., Feliu, J.L. and Hernandez, M. (2005), "Influence of scrap rubber addition to Portland I concrete composites: destructive and non-destructive testing", Comp. Struct., 71(3), 439-446. https://doi.org/10.1016/j.compstruct.2005.09.037
  2. ASTM International (2010), Standard test method for measuring the electromagnetic shielding effectiveness of planar materials, Americal Society of Testing Materials, America.
  3. Bantsis, G., Mavridou, S., Sikalidis, C., Betsiou, M., Oikonomou, N. and Yioultsis, T. (2012), "Comparison of low cost shielding-absorbing cement paste building materials in X-band frequency range using a variety of wastes", Ceram. Int., 38(5), 3683-3692. https://doi.org/10.1016/j.ceramint.2012.01.010
  4. Baoyi, L., Yuping, D. and Shunhua, L. (2012), "The electromagnetic characteristics of fly ash and absorbing properties of cement-based composites using fly ash as cement replacement", Constr. Build. Mater., 27(1), 184-188. https://doi.org/10.1016/j.conbuildmat.2011.07.062
  5. Chiou, J.M., Zheng, Q. and Chung, D.D.L. (1989), "Electromagnetic interference shielding by carbon fibre reinforced cement", Composites, 20(4), 379-381. https://doi.org/10.1016/0010-4361(89)90663-0
  6. Choi, H.J. and Choi, K.K. (2012), "A prediction model of shrinkage cracking of steel fiber reinforced concrete", J. Architec. Inst. Korea Struct. Constr., 28(6), 59-66. https://doi.org/10.5659/JAIK_SC.2012.28.6.59
  7. Draper, G. and Vincent, T. (2005), "Childhood cancer in relation to distance from high voltage power lines in England and Wales: a case-control study", 330(7503), 1290. https://doi.org/10.1136/bmj.330.7503.1290
  8. Eisa, A. (2014), "Properties of concrete incorporating recycled post-consumer environmental wastes", Int. J. Concrete Struct. Mater., 8(3), 251-258. https://doi.org/10.1007/s40069-013-0065-9
  9. Genuis, S.J. (2008), "Fielding a current idea: exploring the public health impact of electromagnetic radiation", Public Health, 122(2), 113-124. https://doi.org/10.1016/j.puhe.2007.04.008
  10. Ghernouti, Y. and Rabehi, B. (2012), "Strength and durability of mortar made with plastics bag waste (MPBW)", Int. J. Concrete Struct. Mater., 6(3), 145-153. https://doi.org/10.1007/s40069-012-0013-0
  11. Greenland, S. and Sheppard, A.R. (2000), "A pooled analysis of magnetic fields, wire codes, and childhood leukemia", Epidemiology, 11(6), 624-634. https://doi.org/10.1097/00001648-200011000-00003
  12. Guan, H., Liu, S., Duan, Y. and Cheng, J. (2006), "Cement based electromagnetic shielding and absorbing building materials", Cement Concrete Comp., 28(5), 468-474. https://doi.org/10.1016/j.cemconcomp.2005.12.004
  13. James, P.R. and James, A.M. (1964), "Tensile strength of concrete affected by uniformly distributed and closely spaced short lengths of wire reinforcement", J. Proc., 61(6), 657-672.
  14. Kabuto, M. and Nitta, H. (2006), "Childhood leukemia and magnetic fields in Japan: A case-control study of childhood leukemia and residential power-frequency magnetic fields in Japan", Int. J. Cancer, 119(3), 643-650. https://doi.org/10.1002/ijc.21374
  15. Kabuto, M., Nitta, H., Yamamoto, S., Yamaguchi, N., Akiba, S., Honda, Y. and Nakamura, Y. (2006), "Childhood leukemia and magnetic fields in Japan: A case‐control study of childhood leukemia and residential power‐frequency magnetic fields in Japan", Int. J. Cancer, 119(3), 643-650. https://doi.org/10.1002/ijc.21374
  16. Khatib, Z.K. and Bayomy, F.M. (1999), "Rubberized Portland cement concrete", J. Mater. Civil Eng., 11(3), 206-213. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:3(206)
  17. Kim, Y.J. and Yi, C. (2015), "The UHF wave shielding effectiveness of mortar with conductive inclusions", J. Architec. Inst. Korea Struct. Constr., 31(4), 103-110. https://doi.org/10.5659/JAIK_SC.2015.31.4.103
  18. KSA (2014), KS C 0304 Test method for measuring the electromagnetic shielding effectiveness of planar Korean standards association, Korea.
  19. Lee, S.H. and Shim, J.W. (2003), "Properties and shielding efficiency of electromagnetic wave absorbing inorganic paint using carbon", J. Architec. Inst. Korea Struct. Constr., 19(1), 69-76.
  20. Li, D.K. and Odouli, R. (2002), "A population-based prospective cohort study of personal exposure to magnetic fields during pregnancy and the risk of miscarriage", Epidemiology, 13(1), 9-20. https://doi.org/10.1097/00001648-200201000-00004
  21. Lim, H.S. and Lee, H.S. (2011), "Experimental study on the development of X-Ray shielding concrete utilizing electronic arc furnace oxidizing slag", J. Architec. Inst. Korea Struct. Constr., 27(7), 125-132.
  22. Michael, P.A. (1997), Regression analysis with standardized variables, Springer, US.
  23. Micheli, D. and Pastore, R. (2014), "Electromagnetic characterization and shielding effectiveness of concrete composite reinforced with carbon nanotubes in the mobile phones frequency band", Mater. Sci. Eng. B, 188, 119-129. https://doi.org/10.1016/j.mseb.2014.07.001
  24. Min, G.C. (2009), EMC engineering, Jinhan MnB, Seoul
  25. Shyr, T.W. and Shie, J.W. (2012), "Electromagnetic shielding mechanisms using soft magnetic stainless steel fiber enabled polyester textiles", J. Magn. Magn. Mater., 324(23), 4127-4132. https://doi.org/10.1016/j.jmmm.2012.07.037
  26. Suchea, M., Tudose, I.V., Tzagkarakis, G., Kenanakis, G., Katharakis, M., Drakakis, E. and Koudoumas, E. (2015), "Nanostructured composite layers for electromagnetic shielding in the GHz frequency range", Appl. Surf. Sci., 352, 151-154. https://doi.org/10.1016/j.apsusc.2015.01.074
  27. Wen, S. and Chung, D.D.L. (2004), "Electromagnetic interference shielding reaching 70 dB in steel fiber cement", Cement Concrete Res., 34(2), 329-332. https://doi.org/10.1016/j.cemconres.2003.08.014
  28. White, D.R.J. and Mardiguian, M. (1988), Electromagnetic shielding, Interference Control Technologies.

피인용 문헌

  1. Zn-Al 합금 선재를 이용한 금속용사 공법 적용 콘크리트의 전자파 차폐 성능 평가에 관한 실험적 연구 vol.19, pp.3, 2016, https://doi.org/10.5345/jkibc.2019.19.3.209