DOI QR코드

DOI QR Code

Analysis and design of demountable steel column-baseplate connections

  • Li, Dongxu (Centre for Infrastructure Engineering and Safety, School of Civil and Environmental Engineering, The University of New South Wales) ;
  • Uy, Brian (Centre for Infrastructure Engineering and Safety, School of Civil and Environmental Engineering, The University of New South Wales) ;
  • Aslani, Farhad (School of Civil, Environmental and Mining Engineering, The University of Western Australia) ;
  • Patel, Vipul (School of Engineering and Mathematical Sciences, College of Science, Health and Engineering, La Trobe University)
  • 투고 : 2016.06.21
  • 심사 : 2016.10.24
  • 발행 : 2016.11.20

초록

This paper aims to investigate the demountability of steel column-baseplate connections subjected to monotonic and cyclic loading. This paper presents the finite element analysis of steel column-baseplate connections under monotonic and cyclic loading. The finite element model takes into account the effects of material and geometric nonlinearities. Bauschinger and pinching effects were also included in the developed model, through which degradation of steel yield strength in cyclic loading can be well simulated. The results obtained from the finite element model are compared with the existing experimental results. It is demonstrated that the finite element model accurately predicts the initial stiffness, ultimate bending moment strength of steel column-baseplate connections. The finite element model is utilised to examine the effects of axial load, baseplate thickness, anchor bolt diameter and position on the behaviour of steel column-baseplate connections. The effects of various parameters on the demountability of steel column-baseplate connections are investigated. To achieve a demountable and reusable structure, various design parameters need to be considered. Initial stiffness and moment capacity of steel columnbaseplate connections are compared with design strengths from Eurocode 3. The comparison between finite element analysis and Eurocode 3 indicates that predictions of initial stiffness for semi-rigid connections should be developed and improved design of the connections needs to be used in engineering practice.

키워드

과제정보

연구 과제 주관 기관 : Australian Research Council (ARC)

참고문헌

  1. ABAQUS (2012), Analysis User's Manual, ABAQUS Standard, Version 6.12.
  2. ACI-318 (2008), Building code requirements for reinforced concrete, ACI; Detroit, MI, USA.
  3. Armstrong, P.J. and Frederick, C.O. (1966), "A mathematical representation of the multiaxial bauschinger effect", CEGB Report No. RD/B/N 731.
  4. Aslani, F., Uy, B., Tao, Z. and Mashiri, F. (2015), "Behaviour and design of composite columns incorporating compact high-strength steel plates", J. Constr. Steel Res., 107, 94-110. https://doi.org/10.1016/j.jcsr.2015.01.005
  5. ATC-24 (1992), Guidelines for cyclic seismic testing of components of steel structures for buildings; Report No. ATC-24, Applied Technology Council, Redwood City, CA, USA.
  6. Bari, S. and Hassan, T. (2000), "Anatomy of coupled constitutive models for ratcheting simulation", Int. J. Plasticity, 16(3-4), 381-409. https://doi.org/10.1016/S0749-6419(99)00059-5
  7. Carreira, D. and Chu, K. (1985), "Stress-strain relationship for plain concrete in compression", Am. Conc. I., 82(6), 797-804.
  8. Chaboche, J.L. (1994), "Modelling of ratchetting: Evaluation of various approaches", Eur. J. Mech., A/Solids, 13(4), 501-518.
  9. Eurocode 3, Part 1-8 (2005), Design of steel structures - Design of joints, European Committee for Standardisation, Brussel, Belgium.
  10. Gomez, I.R., Kanvinde, A.M. and Deierlein, G.G. (2010), "Exposed column base connections subjected to axial compression and flexure", Final Report; Presented to the American Institute of Steel Construction, Chicago, IL, USA.
  11. Grauvilardell, J.E., Lee, D., Hajjar, J.F. and Dexter, R.J. (2005), "Synthesis of design, testing and analysis research on steel column base plate connections in high seismic zones", Struct. Eng., Rep. No. ST-04-02; Department of Civil Engineering, University of Minnesota, Minneapolis, MN, USA.
  12. Green Building Council of Australia (2009), Green Star Overview. URL: www.gbca.org.au
  13. Jaspart, J.P. and Vandegans, D. (1998), "Application of component method to column bases", J. Constr. Steel Res., 48(2-3), 89-106. https://doi.org/10.1016/S0143-974X(98)90196-1
  14. Jia, L.J. and Kuwamura, H. (2014), "Prediction of cyclic behaviours of mild steel at large plastic strain using coupon tests results", J. Strucut. Eng.-ASCE, 140(2), 441-454.
  15. Kanvinde, A.M., Jordan, S.J. and Cooke, R.J. (2013), "Exposed column base plate connections in moment frames-simulations and behavioural insights", J. Constr. Steel Res., 84, 82-93. https://doi.org/10.1016/j.jcsr.2013.02.015
  16. Latour, M., Piluso, V. and Rizzano, G. (2014), "Rotational behaviour of column baseplate connections:experimental analysis and modelling", Eng. Struct., 68, 14-23. https://doi.org/10.1016/j.engstruct.2014.02.037
  17. Li, D., Uy, B., Patel, V.I. and Aslani, F. (2016), "Behaviour and design of demountable steel columncolumn connections", Steel Compos. Struct., Int. J., 22(2), 429-448. https://doi.org/10.12989/scs.2016.22.2.429
  18. Mirza, O. and Uy, B. (2011), "Behaviour of composite beam-column flush end-plate connections subjected to low-probability, high-consequence loading", Eng. Struct., 33(2), 647-662. https://doi.org/10.1016/j.engstruct.2010.11.024
  19. Nakashima, S.g1 (1992), "Experimental behavior of encased steel square tubular column-base connections", Proceedings of the First World Conference on Constructional Steel Design, 240-249.
  20. Picard, A. and Beaulieu, D. (1985), "Behavior of a simple column base connection", Can. J. Civil Eng., 12(1), 126-136. https://doi.org/10.1139/l85-013
  21. Silvestre, E., Mendiguren, J., Galdos, L. and Argandona, E. (2015), "Comparison of the hardening behaviour of different steel families: from mild and stainless steel to advanced high strength steels", Int. J. Mech. Sci., 101-102, 10-20. https://doi.org/10.1016/j.ijmecsci.2015.07.013
  22. Stamatopoulos, G.N. and Ermopoulos, J.C. (2011), "Experimental and analytical investigation of steel column bases", J. Constr. Steel Res., 67(9), 1341-1357. https://doi.org/10.1016/j.jcsr.2011.03.007
  23. Targowski, R., Lamblin, D. and Guerlement, G. (1993), "Baseplate column connection under bending:Experimental and numerical study", J. Constr. Steel Res., 27(1-3), 37-54. https://doi.org/10.1016/0143-974X(93)90005-D
  24. Uy, B. (2014), "Innovative connections for the demountability and rehabilitation of steel", Space Compos. Struct., Prague, Czech Republic.
  25. Uy, B., Patel, V.I., Li, D. and Aslani, F. (2016), "Behaviour and design of connections for demountable steel and composite structures", Structures. [In Press] DOI: 10.1016/j.istruc.2016.06.005
  26. Wald, F., Sokolm, Z. and Steenhuis, M. (1995), "Proposal of the stiffness design model of the column bases", Proceedings of the 3rd International Workshop on Connections in Steel Structures, Trento, Italy, May.
  27. Wald, F., Sokolm, Z. and Steenhuis, M. (1996), "Proposal of the stiffness design model of the column bases", Connect. Steel Struct., 249-258.

피인용 문헌

  1. Behaviour and design of demountable CFST column-column connections under tension vol.138, 2017, https://doi.org/10.1016/j.jcsr.2017.08.027
  2. Behaviour and design of demountable CFST column-column connections subjected to compression vol.141, 2018, https://doi.org/10.1016/j.jcsr.2017.11.021
  3. Experimental and numerical investigation of temperature effects on steel members due to solar radiation vol.127, 2017, https://doi.org/10.1016/j.applthermaleng.2017.08.045
  4. Analysis of demountable steel and composite frames with semi-rigid bolted joints vol.28, pp.3, 2018, https://doi.org/10.12989/scs.2018.28.3.363
  5. Analysis and design of demountable circular CFST column-base connections vol.28, pp.5, 2016, https://doi.org/10.12989/scs.2018.28.5.559
  6. Design of a Novel Prefabricated Bolted I-Beam to Box-Column Connection Using Numerical Analysis Under Cyclic Load vol.19, pp.5, 2019, https://doi.org/10.1007/s13296-019-00222-6