Abstract
The simulation of nondestructive testing has been used in the prediction of the signal characteristics of various defects and in the development of the procedures. CIVA, a simulation tool dedicated to nondestructive testing, has good accuracy and speed, and provides a three-dimensional graphical user interface for improved visualization and familiar data displays consistent with an NDE technique. Even though internal validations have been performed by the CIVA software development specialists, an independent validation study is necessary for the assessment of the accuracy of the software prior to practical use. In this study, time of flight diffraction signals of ultrasonic inspection of a calibration block for reactor vessel head penetrations were simulated using CIVA. The results were compared to the experimentally inspected signals. The accuracy of the simulated signals and the possible range for simulation were verified. It was found that, there is a good agreement between the CIVA simulated and experimental results in the A-scan signal, B-scan image, and measurement of depth.
비파괴검사 분야에 대한 시뮬레이션은 다양한 결함에 대한 신호의 예측과 검사 절차 개발에 사용되어진다. 특히 비파괴검사 전용 시뮬레이션 툴인 CIVA는 정확도가 높고 빠른 계산이 가능하며, 비파괴평가 기술과 동일한 형태의 화면 표시와 시각적으로 개선된 3차원 그래픽 유저 인터페이스를 제공한다. CIVA 소프트웨어 개발자가 내부적으로 타당성 검증을 시행하겠지만, 사용 이전에 소프트웨어의 정확도를 평가하는 독립적인 유효성 검증 연구가 필요하다. 이러한 목적으로 이번 연구에서는 CIVA를 이용하여 원자로 상부 헤드 관통관 검사에 사용되는 보정시험편에 대하여 TOFD 신호를 시뮬레이션하고, 실제 검사 신호와 비교하여 시뮬레이션 신호의 정확도와 적용 범위에 대하여 검증하였다. 종합적으로, A-scan 신호, B-scan 이미지, 깊이 측정 측면에서 CIVA 시뮬레이션 결과와 실험 결과 간에 전반적으로 일치를 보였다.