DOI QR코드

DOI QR Code

Weldability with Process Parameters During Fiber Laser Welding of a Titanium Plate (I) - Effect of Type and Flow Rate of Shielding Gases on Weldability -

티타늄 판재의 파이버 레이저 용접시 공정변수에 따른 용접특성 (I) - 실드가스 종류 및 유량에 따른 영향 -

  • Kim, Jong Do (Division of Marine Engineering, Korea Maritime and Ocean Univ.) ;
  • Kim, Ji Sung (Graduate School, Korea Maritime and Ocean Univ.)
  • 김종도 (한국해양대학교 기관공학부) ;
  • 김지성 (한국해양대학교 대학원 기관공학과)
  • Received : 2016.09.22
  • Accepted : 2016.11.10
  • Published : 2016.12.01

Abstract

In this study, welding of pure titanium was carried out by using a continuous wave fiber laser with a maximum output of 6.3 kW. Because brittle regions form easily in titanium as a result of oxidation or nitriding, the weld must be protected from the atmosphere by using an appropriate shielding gas. Experiments were performed by changing the type and the flow rate of shielding gases to obtain the optimal shielding condition, and the weldability was then evaluated. The degree of oxidation and nitriding was distinguished by observing the color of beads, and weld microstructure was observed by using an optical microscope and a scanning electron microscope. The mechanical properties of the weld were examined by measuring hardness. When the weld was oxidized or nitrified, the bead color was gray or yellow, and the oxygen or nitrogen content in the bead surface and overall weld tended to be high, as a result of which the hardness of the weld was thrice that of the base metal. A sound silvery white bead was obtained by using Ar as the shielding gas.

본 연구에서는 최대 출력 6.3 kW의 연속 출력 파형 파이버 레이저를 사용하여 순 티타늄 용접을 실시하였다. 용접 시 티타늄은 산화 및 질화로 인한 취성영역을 형성하기 쉽기 때문에 적절한 실드가스를 사용하여 용접부를 대기로부터 보호해야한다. 따라서 최적의 실드가스를 선정하기 위하여 실드가스의 종류를 변화시켜 실험을 실시하였으며 그에 따른 용접성을 평가하였다. 비드색을 통하여 산화 및 질화정도를 간접적으로 판별하였으며 EDS와 EPMA를 사용하여 용접부의 성분분석을 실시하였다. 또한 광학 현미경 및 전자 주사 현미경으로 용접부의 미세조직을 관찰하였으며 경도측정을 통해 기계적 특성을 파악하였다. 용접부가 산화 또는 질화될 경우 회색 또는 노란색의 비드를 얻을 수 있었으며 비드표면뿐만 아니라 용접부 내부까지 산소 및 질소량이 증가하여 경도값이 모재 대비 3배 이상 크게 증가하였다. 결과적으로 아르곤 가스를 전면실드에 사용하였을 때 은백색의 건전한 비드를 얻을 수 있었다.

Keywords

References

  1. Lutjering, G. and Williams, J. C., 2007. "Titanium," Springer-Verlag, Berlin.
  2. Donachie, M. J., 1988, "Titanium A Technical Guide," ASM.
  3. Leyens, C. and Peters, M., 2003, "Titanium and Titanium Alloys," Fundamentals and Applications.
  4. Oshida, Y., 2013, "Bioscience and Bioengineering of Titanium Materials," Elsevier insights.
  5. Zu, X, Feng, X., Wang, Z., Zeng, G., Lin, L., Li, Y. and Huang, X., 2001, "Characterisation of the Oxide Scale on a Ti-2Al-2.5Zr Alloy with and Without Pre-oxidation in an Alkaline Steam at $300^{\circ}C$," Surface and Coatings Technology, Vol. 148, No. 2-3, pp. 216-220. https://doi.org/10.1016/S0257-8972(01)01358-5
  6. Guleryuz, H. and Cimenoglu, H., 2004, "Effect of Thermal Oxidation on Corrosion and Corrosion-wear Behaviour of a Ti-6Al-4V Alloy," Biomaterials, Vol. 25, No. 16, pp. 3325-3333. https://doi.org/10.1016/j.biomaterials.2003.10.009
  7. Ahn, H., Lee, D., Lee, K., Baek, D. and Park, S. W., 2008, "Oxidation Behavior and Corrosion Resistance of Ti-10Ta-10Nb Alloy," Surface & Coatings Technology, Vol. 202, No. 22-23, pp. 5784-5789. https://doi.org/10.1016/j.surfcoat.2008.06.074
  8. Kim, J. D., Kim, J. S., Song, M. K., Chun, C. K. and Kim, S. W., 2015, "The Effect of Shieling Gas on Its Weldability in the Fiber Laser Welding of Pure Titanium," Proceeding of the KSME 2015 Annual meeting, pp. 1890-1891.
  9. Casalino, G., Mortello, M. and Campanelli, S. L., 2015, "Ytterbium Fiber Laser Welding of Ti6Al4V Alloy," Journal of Manufacturing Processes, Vol. 20, pp. 250-256. https://doi.org/10.1016/j.jmapro.2015.07.003
  10. Karpagaraj, A., Shanmugam, N. S. and Sankaranarayanasamy, K., 2015, "Some Studies on Mechanical Properties and Microstructural Characterization of Automated TIG Welding of Thin Commercially Pure Titanium Sheets," Materials Science & Engineering A, Vol. 640, pp. 180-189. https://doi.org/10.1016/j.msea.2015.05.056
  11. Zhang, Y., Ying, Y., Liu, X. and Wei, H., 2016, "Deformation Control During the Laser Welding of a Ti6Al4V Thin Plate Using a Synchronous Gas Cooling Method," Materials and Design, Vol. 90, pp. 931-941. https://doi.org/10.1016/j.matdes.2015.11.035
  12. Schneider, A., Gumenyuk, A., Lammers, M., Malletschek, A. and Rethmeier, M., 2014, "Laser Beam Welding of Thick Titanium Sheets in the Field of Marine Technology," Physics Procedia, Vol. 56, pp. 582-590. https://doi.org/10.1016/j.phpro.2014.08.046
  13. Katayama, S., 2013, "Handbook of Laser Welding Technologies," Woodhead Publishing Series in Electronic and Optical Materials. UK: Elsevier Science & Technology.
  14. Schneider, A., Gumenyuk, A., Lammers, M. and Malletschek, A., 2014, "Laser Beam Welding of Thick Titanium Sheets in the Field of Marine Technology," Phys Procedia, Vol. 56, pp. 582-590. https://doi.org/10.1016/j.phpro.2014.08.046