참고문헌
- Srinivasan, V. S., Valsan, M., Sandhya, R., Bhanu Sankara Rao, K., Mannan, S. L. and Sastry, D. H., 1999, "High Temperature Time-dependent Low Cycle Fatigue Behaviour of a Type 316L(N) Stainless Steel," Int. J. Fatigue, Vol. 21, pp. 11-21. https://doi.org/10.1016/S0142-1123(98)00052-8
- Valsan, M., Nagesha, A., Bhanu Sankara Rao, K. and Mannan, S. L., 2000, "A Comparative Evaluation of Low Cycle Fatigue and Creep-fatigue Interaction Behaviour of 316L(N) SS, Weld Metal and 316L(N)/316 Weld Joint at 873K," Trans Indian Inst. Metals, 53, pp. 263-271.
- Mannan, S. L. and Valsan, M., 2006, "High-temperature Low Cycle Fatigue, Creep-fatigue and Thermomechanical Fatigue of Steels and Their Welds," Int. J. Mech. Sci, 48, pp. 160-175. https://doi.org/10.1016/j.ijmecsci.2005.08.004
- Coffin, L. F., 1954, "A Study of the Effects of Cyclic Thermal Stress on a Ductile Metal," Trans ASME, 76, pp. 931-950.
- Manson, S. S., 1953, "Behavior of Materials under Conditions of Thermal Stress," Michigan: Heat Transfer Symposium, University of Michigan Engineering Research Institute.
- Halford, G. R., 1966, "The Energy Required for Fatigue," J Mater, 1(1), pp. 3-18.
- Morrow, J., 1965, "Cyclic Plastic Strain Energy and Fatigue of Metals," ASTM STP 378, pp. 45-84.
- Morrow, J., 1968, "Fatigue Design Handbook, Advances in Engineering," Society of Automotive Engineers. Warrendale. Pa, Vol. 4, Sec. 3. 2, pp. 21-29.
- Smith, R. N., Watson, P. and Topper, T. H., 1970, "A Stress-strain Function for the Fatigue of Metal," J Mater, 5(4), pp. 767-78.
- Lorenzo, F. and Laird, C., 1984, "A New Approach to Predicting Fatigue Life Behavior under the Action of Mean Stresses," Mater. Sci. Eng, 62, pp. 205-210. https://doi.org/10.1016/0025-5416(84)90223-4
- Kwofie, S., 2001, "An Exponential Stress Function for Predicting Fatigue Strength and Life due to Mean Stresses," Int J Fatigue, Vol. 23, No. 9, pp. 829-36. https://doi.org/10.1016/S0142-1123(01)00044-5
- Koh, S. K., 2002, "Fatigue Damage Evaluation of a High Pressure Tube Steel using Cyclic Strain Energy Density," J Pressure Vessel Technol, 79, pp. 791-798. https://doi.org/10.1016/S0308-0161(02)00135-7
- Ye, D., Matsuoka, S., Nagashima, N. and Suzuki, N., 2006, "The Low Cycle Fatigue, Deformation and Final Fracture of an Austenitic Stainless Steel," Mater. Sci. Eng, A. 415, pp. 104-117. https://doi.org/10.1016/j.msea.2005.09.081
- Sivaprasad, S., Paul, S. K., Das, A., Narasiah, N. and Tarafder, S., 2010, "Cyclic Plastic Behaviour of Primary Heat Transport Piping Materials: Influence of Loading Schemes on Hysteresis Loop," Mater. Sci. Eng, A. 527, pp. 6858-6869. https://doi.org/10.1016/j.msea.2010.07.041
- Hong, S. G., Yoon, S. S. and Lee, S. B., 2004, "The Influence of Temperature on Low Cycle Fatigue Behavior of Prior Cold Worked 316L Stainless Steel (1) - Monotonic and Cyclic Behavior -," Trans.Korea Soc. Mech. Eng. A, Vol. 28, No. 4, pp. 333-342. https://doi.org/10.3795/KSME-A.2004.28.4.333
- Ellyin, F., 1985, "Effect of Tensile-Mean-Strain on Plastic Strain Energy and Cyclic Response," J. Eng. Mater. Techno, Vol. 107(2), pp. 119-125. https://doi.org/10.1115/1.3225786
- Wittke, H., Olfe, J. and Rie, K. T., 1997, "Description of Stress-strain Hysteresis Loops with a Simple Approach," Int. J. Fatigue, Vol. 19, No. 2, pp. 141-149. https://doi.org/10.1016/S0142-1123(96)00059-X
- Jhansale, H. R. and Topper, T. H., 1973, "Engineering Analysis of the Inelastic Stress Response of a Structural Metal Under Variable Cyclic Strains," ASTM STP-519, pp. 246-270.
- Sachs, G., Gerberich, W. W., Weiss, V. and Latorre, J. V., 1960, "Low-cycle Fatigue of Pressure Vessel Materials," ASTM, Vol. 60, pp. 512-529.
- Mughrabi, H. and Christ, H. J., 1997, "Cyclic Deformation and Fatigue of Selected Ferritic and Austenitic Steels: Specific Aspects," ISIJ Int, 37, pp. 1154-1169. https://doi.org/10.2355/isijinternational.37.1154
- Murakami, Y., 2002, "Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions," Elsevier, pp. 185-192.